########################################################################################## ## Configuration Template For GRP260x Firmware Version 1.0.5.65 ## ########################################################################################## #################################################################### # Accounts ## #################################################################### #################################################################### # Account 1 ## #################################################################### ############################################################### # Account 1/General Settings ############################################################### ############################################################### # Account 1/General Settings/Account Register ############################################################### # Account Active. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P271 = 0 # Account Name # String P270 = # SIP Server # String P47 = # Secondary SIP Server # String P2312 = # Outbound Proxy # String P48 = # Secondary Outbound Proxy # String P2333 = # SIP User ID # String P35 = # SIP Authentication ID # String P36 = # SIP Authentication Password # String P34 = # Name # String P3 = # Tel URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 # Number: 0, 1, 2 # Mandatory P63 = 0 # Voicemail Access Number # String P33 = # BLF Server # String P2375 = # Account Display # Number: 0, 1. 0 - User Name, 1 - User ID. Default is 0 # Mandatory P2380 = 0 # UCM User Password # String P60061 = ############################################################### # Account 1/General Settings/Network Settings ############################################################### # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P103 = 0 # DNS Mode--A Record # NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 4. # Number: 0, 1, 2, 3, 4, 5 # Mandatory P52 = 4 # Support Rport (RFC3581). 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P131 = 1 # Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters # String P197 = # Use SBC. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26090 = 0 # DNS Mode--SRV # Maximum Number of SIP Request Retries # Number: 1 - 10 # Mandatory P60055 = 4 # DNS SRV Failover Mode. 0 - Default, 1 - Saved one until DNS TTL, 2 - Saved one until no response, 3 - Failback follows failback expiration timer. # Number: 0,1,2,3. Default is 0 # Mandatory P26040 = 0 # Register Before DNS SRV Fail-over. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P29095 = 0 # Failback Expiration (m) # Number P60056 = 60 # DNS Mode--Use Configured IP # Primary IP. Maximum 15 characters # String P2308 = # Backup IP 1 # String P2309 = # Backup IP 2 # String P2310 = ############################################################### # Account 1/SIP Settings ############################################################### ############################################################### # Account 1/SIP Settings/Basic Settings ############################################################### # SIP Registration. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P31 = 1 # Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0 # Number: 0, 1, 2 # Mandatory P81 = 0 # Register Expiration (in minutes). Default is 60. Max about 45 days # Number: 1 - 64800 # Mandatory P32 = 60 # Subscribe Expiration (in minutes). Default is 60. Max about 45 days # Number: 1 - 64800 # Mandatory P26051 = 60 # Re-register Before Expiration (in seconds). Default is 0 seconds # Number: 0 - 64800 # Mandatory P2330 = 0 # Registration Retry Wait Time (in seconds). Default is 20 # Number: 1 - 3600 # Mandatory P138 = 20 # Add Auth Header On Initial REGISTER. Default is 0 # Number: 0, 1 # Mandatory P2359 = 0 # Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0 # Number: 0,1 # Mandatory P2397 = 0 # OPTIONS Keep Alive Interval. Default is 30 # Number # Mandatory P2398 = 30 # OPTIONS Keep-Alive Max Tries. Default is 3 # Number # Mandatory P2399 = 3 # SUBSCRIBE for MWI. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P99 = 0 # SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2319 = 0 # Use Privacy Header # 0 - Default, 1 - No, 2 - Yes. Default is 0 # Number: 0, 1, 2 # Mandatory P2338 = 0 # Use P-Preferred-Identity Header # 0 - Default, 1 - No, 2 - Yes. Default is 0 # Number: 0, 1, 2 # Mandatory P2339 = 0 # Use X-Grandstream-PBX Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26054 = 1 # Use P-Access-Network-Info Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26058 = 1 # Use P-Emergency-Info Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26059 = 1 # Use P-Asserted-Identity Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P29098 = 0 # Use P-Early-Media Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60072 = 0 # Use Zoom E911 X-switch-info SIP Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60070 = 0 # Use MAC Header # 0 - No, 1 - Only for REGISTER, 2 - Yes to all SIP. Default is 0 # Number: 0, 1, 2 # Mandatory P29090 = 0 # Add MAC in User-Agent # 0 - No, 1 - Yes except REGISTER, 2 - Yes to all SIP. Default is 0 # Number: 0, 1, 2 # Mandatory P26061 = 0 # SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS/TCP. Default is 0 # Number: 0, 1, 2 # Mandatory P130 = 0 # Enable TCP Keep-alive.0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P60065 = 1 # SIP Listening Mode. # 0 - Transport Only, 1 - Dual, 2 - Dual (BLF Enforced), 3 - Dual (Secured). Default is 0 # Number: 0,1,2,3 # Mandatory P26024 = 0 # Local SIP Port. Default is 5060 # Number # Mandatory P40 = 5060 # SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1 # Number: 0, 1 # Mandatory P2329 = 1 # Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2331 = 0 # Support SIP Instance ID. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P288 = 1 # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 50 # Number: 50, 100, 200 # Mandatory P209 = 50 # SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400 # Number: 200, 400, 800 # Mandatory P250 = 400 # Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to # Number: 0, 1, 2 # Mandatory P2305 = 0 # Enable 100rel. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P272 = 0 # Use Route Set in NOTIFY(Follow RFC 6665) # Number: 0, 1. 0 - No, 1 - Yes # Mandatory P60059 = 1 ############################################################### # Account 1/SIP Settings/Session Timer ############################################################### # Enable Session Timer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2395 = 0 # Session Expiration (in seconds). Default is 180 # Number: 90 - 64800 # Mandatory P260 = 180 # Min-SE (in seconds). Default is 90. # Number: 90 - 64800 # Mandatory P261 = 90 # Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P262 = 0 # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P263 = 0 # Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P264 = 0 # UAC Specify Refresher. 0 - Omit, 1 - UAC, 2 - UAS. Default is 1 # Number: 0 - 2 # Mandatory P266 = 1 # UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 # Number: 1, 2 # Mandatory P267 = 1 # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE). # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P265 = 0 ############################################################### # Account 1/Codec Settings ############################################################### ############################################################### # Account 1/Codec Settings/Audio ############################################################### # Preferred Vocoder # 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 98 - iLBC, 123 - OPUS, 103 - G.726-16, 104 - G.726.24, 105 - G.726.40 # Number: 0, 2, 4, 8, 9, 18, 98, 123, 103, 104, 105 # choice 1. Default is 9 # Mandatory P57 = 9 # choice 2. Default is 123 # Mandatory P58 = 123 # choice 3. Default is 0 # Mandatory P59 = 0 # choice 4. Default is 8 # Mandatory P60 = 8 # choice 5. Default is 4 # Mandatory P61 = 4 # choice 6. Default is 18 # Mandatory P62 = 18 # choice 7. Default is 98 # Mandatory P46 = 98 # choice 8. Default is 2 # Mandatory P98 = 2 # Codec Negotiation Priority. 0 - Caller, 1 - Callee. Default is 1 # Number: 0, 1 # Mandatory P29061 = 1 # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2348 = 0 # iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 # Number: 0, 1 # Mandatory P97 = 1 # iLBC Payload Type. Default is 97 # Number: 96 - 127 # Mandatory P96 = 97 # G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0 # Number: 0, 1 # Mandatory P2323 = 0 # G.726-32 Dynamic Payload Type. Default is 127 # Number: 96 - 127 # Mandatory P2365 = 127 # OPUS Payload Type. Default is 123 # Number: 96 - 127 # Mandatory P2385 = 123 # Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2301 = 0 # Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P2302 = 1 # Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2303 = 0 # DTMF Payload Type. Default is 101 # Number: 96 - 127 # Mandatory P79 = 101 # Inbound DTMF Volume. Default is 18 # Number： 0 - 32 # Mandatory P60079 = 18 # Enable Audio RED with FEC. Default is 1. # Number: 0, 1 # Mandatory P26073 = 1 # Audio FEC Payload Type. Default is 121. # Number: 96-126 # Mandatory P26074 = 121 # Audio RED Payload Type. Default is 124. # Number: 96-126 # Mandatory P26075 = 124 # Silence Suppression. 0 - No, 1 - Yes. Default is 0 # Number: 0,1 # Mandatory P50 = 0 # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 # Number: 0, 1 # Mandatory P133 = 1 # Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms # Default is 2 # Number: 0, 1, 2, 3, 4, 5, 6, 7 # Mandatory P132 = 2 # Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 # Number: 1 - 6 # Mandatory P37 = 2 # G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 # Number: 0, 1 # Mandatory P49 = 1 ############################################################### # Account 1/Codec Settings/RTP Settings ############################################################### # SRTP Mode. 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P183 = 0 # SRTP Key Length. 0 - AES 128&256 bit, 1 - AES 128 bit, 2 - AES 256 bit. Default is 0 # Default is 0 # Number: 0,1 # Mandatory P2383 = 0 # Crypto Life Time # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P2363 = 1 # RTCP Mode # Number: 0, 1, 2, 3. 0 - Default, 1 - Negotiated, 2- RTCP Mux, 3 - RTCP Mux Only. Default is 0 # Mandatory P60060 = 0 # RTCP Keep-Alive method # Number: 1, 2. 1 - Receiver Report, 2 - Sender Report. Default is 1. # Mandatory P60066 = 1 # RTP Keep-Alive method # Number: 0, 1. 0 - No, 1 - RTP Version 1. Default is 1. # Mandatory P60067 = 1 # VQ RTCP-XR # VQ RTCP-XR Collector Name. # String P26093 = # VQ RTCP-XR Collector Address. # String P26094 = # VQ RTCP-XR Collector Port # String P26095 = 5060 # Symmetric RTP. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P291 = 0 # RTP Timeout (s). Default is 30. # Number: 0, 6 - 600. # Mandatory P29068 = 0 ############################################################### # Account 1/Call Settings ############################################################### ############################################################### # Account 1/Call Settings ############################################################### # General # Key as Send. 0 - Disabled, 1 - Pound (#), 2 - Star (*). Default is 1 # Number: 0, 1, 2 # Mandatory P72 = 1 # No Key Entry Timeout (in seconds). Default is 4 # Number: 1 - 15 # Mandatory P85 = 4 # Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P65 = 0 # Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P129 = 0 # Enable Call Waiting. 0 - Default, 1 - Yes, 2 - No. Default is 0 # Number: 0, 1, 2 # Mandatory P26063 = 0 # RFC2543 Hold. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26062= 0 # Ring Timeout (in seconds). Default is 60 # Number: 30 - 3600 # Mandatory P1328 = 60 # Call Log. 0 - Log All Calls, 1 - Log Incoming/Outgoing only (missed calls NOT recorded), 2 - Disable Call Log. Default is 0 # Number: 0, 1, 2 # Mandatory P182 = 0 # Auto Answer # Auto Answer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P90 = 0 # Auto Answer Numbers. Up to 10 numbers. Each number is seperated by a semi-colon # String P29064 = # Intercom # Play warning tone for Auto Answer Intercom. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26072 = 1 # Custom Alert-Info for Auto Answer. # String P2356 = # Allow Auto Answer by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P298 = 1 # Allow Barging by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26019 = 0 # Mute on Intercom Auto Answer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26071 = 0 # Record # Record Key Default Function. 0 - Record On, 1 - Record Off P29066 = 0 # Call Recording On # String P26028 = # Call Recording Off # String P26029 = # Transfer # Transfer on Conference Hangup. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2304 = 0 # Transfer to VM feature code # Strings. Default is * P60092 = * # Enable Recovery on Blind Transfer. 0 - Yes, 1 - No. Default is 0 # Number: 0, 1 # Mandatory P2384 = 0 # Blind Transfer Wait Timeout. Default is 30 # Number: 30 - 300 # Mandatory P26070 = 30 # Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P135 = 0 # Call Forward # No Answer Timeout (s). Default is 12 # Number: 1 - 120 # Mandatory P139 = 12 # Enable Override Forward. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60062 = 0 # Override Forward Numbers # Strings P60063 = ############################################################### # Account 1/Call Settings/Dial Plan ############################################################### # Dial Plan Prefix # String P66 = # Bypass Dial Plan # String: contact,incoming,outgoing,dialing,mpk,api P2382 = mpk # Dial Plan. Default value is {x+|\+x+|*x+|*xx*x+} # String # Mandatory P290 = {x+|\+x+|*x+|*xx*x+} ############################################################### # Account 1/Call Settings/Call Display ############################################################### # Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 2 # Number: 0, 1, 2 # Mandatory P2324 = 2 # Callee ID Display. 0 - Auto, 1 - Disabled, 2 - To Header. Default is 0 # Number: 0, 1, 2 # Mandatory P26025 = 0 ############################################################### # Account 1/Call Settings/Ringtone ############################################################### # Ringback Tone at No Early Media # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60073 = 0 # Account Ring Tone. 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P104 = 0 # Ignore Alert-Info header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26018 = 0 # Matching Incoming Caller ID. Matching Rule 1 # String P1488 = # Matching Rule 1 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1489 = 0 # Matching Incoming Caller ID. Matching Rule 2 # String P1490 = # Matching Rule 2 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1491 = 0 # Matching Incoming Caller ID. Matching Rule 3 # String P1492 = # Matching Rule 3 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1493 = 0 # Matching Incoming Caller ID. Matching Rule 4 # String P6716 = # Matching Rule 4 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6717 = 0 # Matching Incoming Caller ID. Matching Rule 5 # String P6718 = # Matching Rule 5 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6719 = 0 # Matching Incoming Caller ID. Matching Rule 6 # String P6720 = # Matching Rule 6 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6721 = 0 # Matching Incoming Caller ID. Matching Rule 7 # String P26064 = # Matching Rule 7 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26065 = 0 # Matching Incoming Caller ID. Matching Rule 8 # String P26066 = # Matching Rule 8 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26067 = 0 # Matching Incoming Caller ID. Matching Rule 9 # String P26068 = # Matching Rule 9 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26069 = 0 # Matching Incoming Caller ID. Matching Rule 10 # String P26096 = # Matching Rule 10 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26097 = 0 ############################################################### # Account 1/Advanced Settings ############################################################### ############################################################### # Account 1/Advanced Settings/Security Settings ############################################################### # Check Domain Certificates. When set to Yes/Enabled, domain certificate will be checked as defined in RFC5922 # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2311 = 0 # Trusted Domain Name List # String P60082 = # Validate Certification Chain. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2367 = 0 # Validate Incoming SIP Messages. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2306 = 0 # Omit charset=UTF-8 in MESSAGE. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2355 = 0 # Allow Unsolicited REFER. 0 - Disabled, 1 - Enabled, 2 - Enabled/Force Auth. Default is 0 # Number: 0, 1, 2 # Mandatory P26023 = 0 # Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2347 = 0 # Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P258 = 0 # Allow SIP Reset # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26015 = 0 # Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2346 = 0 ############################################################### # Account 1/Advanced Settings/MOH ############################################################### # On Hold Reminder Tone. 0 - Disabled, 1 - Enable. Default is 1 # Number: 0, 1 # Mandatory P26006 = 1 # Music On Hold URI # String P2350 = ############################################################### # Account 1/Advanced Settings/Advanced Features ############################################################### # Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, # 109 - RNK, 110 - Sylantro, 117 - Huawei IMS, 119 - Phonepower, 120 - UCM Call Center, 137 - Zoom # Default is 100 # Number: 100, 101, 102, 108, 109, 110, 117, 119, 120, 137 # Mandatory P198 = 100 # Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2325 = 0 # Conference URI # String P2318 = # Broadsoft # Broadsoft Call Center. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2341 = 0 # Hoteling Event. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2342 = 0 # Call Center Status. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2343 = 0 # Broadsoft Executive Assistant. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2364 = 0 # Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2388 = 0 ############################################################### # Account 1/Advanced Settings/BLF(Busy Lamp Field) 2604 only ############################################################### # Presence Eventlist URI # String P26084 = # Eventlist BLF URI # String P134 = # Auto Provision Eventlists. 0 - Disabled, 1 - BLF Eventlist, 2 - Presence Eventlist. Default is 0 # Number:0,1,2 # Mandatory P2389 = 0 # BLF Call-pickup. 0 - Auto, 1 - Force BLF Call-pickup by prefix, 2 - Disabled. Default is 0 # Number: 0, 1, 2 # Mandatory P6752 = 0 # BLF Call-pickup Prefix. Default is ** # String # Mandatory P1347 = ** # Call Pickup Barge-In Code # String P26046 = # PUBLISH for Presence. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P188 = 0 ############################################################### # Account 1/SCA ############################################################### # Line-Seize Timeout (in seconds). Default is 15 # Number: 15 - 60 # Mandatory P2313 = 15 ############################################################### # Account 1/Call Park ############################################################### # Call Park Feature Code # String P60069 = # Call Park Retrieve Feature Code # String P2336 = ############################################################### # Account 1/Hidden Number Plan ############################################################### # Hidden Number Features # Number: 0,1,2,3. 0-None of Calls, 1-Incoming Calls, 2-Outgoing Calls, 3-Booth Direction Calls. Default is 0. # Mandatory P26043 = 0 # Hidden Number Plan List # String P60058 = { x+(xxxx)xxxx | xx(xx+)xx | x(xx+)x | x(x+) | (x+) } ############################################################### # Account 1/Feature Codes ############################################################### #Enable Local Call Features. 0 - No, 1 - Yes. Default is 1 #Number: 0, 1 #Mandatory P191 = 1 # DND Call Feature On # String P2344 = # DND Call Feature Off # String P2345 = # Call Forward Always - On # String P26013 = # Call Forward Always - Off # String P26014 = # Call Forward Always - Target # String P29092 = # Call Forward Busy - On # String P26009 = # Call Forward Busy - Off # String P26010 = # Call Forward Busy - Target # String P29093 = # Call Forward No Answer - On # String P26011 = # Call Forward No Answer - Off # String P26012 = # Call Forward No Answer - Target # String P29094 = # Call Forward No Answer Timeout (s) # Number: 1 - 120. Default is 12. # P139 = 12 #################################################################### # Account 2 ## #################################################################### ############################################################### # Account 2/General Settings ############################################################### ############################################################### # Account 2/General Settings/Account Register ############################################################### # Account Active. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P401 = 0 # Account Name # String P417 = # SIP Server # String P402 = # Secondary SIP Server # String P2412 = # SIP User ID # String P404 = # Outbound Proxy # String P403 = # Backup Outbound Proxy # String P2433 = # SIP Authentication ID # String P405 = # SIP Authentication Password # String P406 = # Name # String P407 = # TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 # Number: 0, 1, 2 # Mandatory P409 = 0 # Voicemail Access Number # String P426 = # BLF Server # String P2475 = # Account Display # Number: 0, 1. 0 - User Name, 1 - User ID. Default is 0 # Mandatory P2480 = 0 # UCM User Password # String P60161 = ############################################################### # Account 2/General Settings/Network Settings ############################################################### # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P408 = 0 # NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 4. # Number: 0, 1, 2, 3, 4, 5 # Mandatory P414 = 4 # Support Rport (RFC3581). 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P447 = 1 # Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters # String P418 = # Use SBC. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26190 = 0 # Maximum Number of SIP Request Retries # Number: 1 - 10 # Mandatory P60155 = 4 # DNS SRV Failover Mode. 0 - Default, 1 - Saved one until DNS TTL, 2 - Saved one until no response. Default is 0 # Number: 0,1,2 # Mandatory P26140 = 0 # Register Before DNS SRV Fail-over. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P29195 = 0 # Failback Expiration (m) # Number P60156 = 60 # DNS Mode--Use Configured IP # Primary IP. Maximum 15 characters # String P2408 = # Backup IP 1 # String P2409 = # Backup IP 2 # String P2410 = ############################################################### # Account 2/SIP Settings ############################################################### ############################################################### # Account 2/SIP Settings/Basic Settings ############################################################### # SIP Registration. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P410 = 1 # Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0 # Number: 0, 1, 2 # Mandatory P411 = 0 # Register Expiration (in minutes). Default is 60. Max about 45 days # Number: 1 - 64800 # Mandatory P412 = 60 # Subscribe Expiration (in minutes). Default is 60. Max about 45 days # Number: 1 - 64800 # Mandatory P26151 = 60 # Reregister Before Expiration (in seconds). Default is 0 seconds # Number: 0 - 64800 # Mandatory P2430 = 0 # SIP Registration Failure Retry Wait Time (in seconds). Default is 20 # Number: 1 - 3600 # Mandatory P471 = 20 # Add Auth Header On Initial REGISTER. Default is 0 # Number: 0, 1 # Mandatory P2459 = 0 # Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0 # Number: 0,1 # Mandatory P2497 = 0 # OPTIONS Keep Alive Interval. Default is 30 # Number # Mandatory P2498 = 30 # OPTIONS Keep Alive Max Lost. Default is 3 # Number # Mandatory P2499 = 3 # SUBSCRIBE for MWI. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P415 = 0 # SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2419 = 0 # Use Privacy Header # 0 - Default, 1 - No, 2 - Yes. Default is 0 # Number: 0, 1, 2 # Mandatory P2438 = 0 # Use P-Preferred-Identity Header # 0 - Default, 1 - No, 2 - Yes. Default is 0 # Number: 0, 1, 2 # Mandatory P2439 = 0 # Use X-Grandstream-PBX Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26154 = 1 # Use P-Access-Network-Info Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26158 = 1 # Use P-Emergency-Info Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26159 = 1 # Use P-Asserted-Identity Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P29198 = 0 # Use P-Early-Media Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60172 = 0 # Use Zoom E911 X-switch-info SIP Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60170 = 0 # Use MAC Header # 0 - No, 1 - Only for REGISTER, 2 - Yes to all SIP. Default is 0 # Number: 0, 1, 2 # Mandatory P29190 = 0 # Add MAC in User-Agent # 0 - No, 1 - Yes except REGISTER, 2 - Yes to all SIP. Default is 0 # Number: 0, 1, 2 # Mandatory P26161 = 0 # SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS/TCP. Default is 0 # Number: 0, 1, 2 # Mandatory P448 = 0 # Enable TCP Keep-alive.0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P60165 = 1 # SIP Listening Mode. # 0 - Transport Only, 1 - Dual, 2 - Dual (BLF Enforced), 3 - Dual (Secured). Default is 0 # Number: 0,1,2,3 # Mandatory P26124 = 0 # Local SIP Port. Default is 5062 # Number # Mandatory P413 = 5062 # SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1 # Number: 0, 1 # Mandatory P2429 = 1 # Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2431 = 0 # Support SIP Instance ID. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P489 = 1 # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 50 # Number: 50, 100, 200 # Mandatory P440 = 50 # SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400 # Number: 200, 400, 800 # Mandatory P441 = 400 # Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to # Number: 0, 1, 2 # Mandatory P2405 = 0 # Enable 100rel. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P435 = 0 # Use Route Set in NOTIFY(Follow RFC 6665) # Number: 0, 1 # Mandatory P60159 = 1 ############################################################### # Account 2/SIP Settings/Session Timer ############################################################### # Enable Session Timer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2495 = 0 # Session Expiration (in seconds). Default is 180 # Number: 90 - 64800 # Mandatory P434 = 180 # Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P260 # Number: 90 - 64800 # Mandatory P427 = 90 # Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P428 = 0 # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P429 = 0 # Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P430 = 0 # UAC Specify Refresher. 0 - Omit, 1 - UAC, 2 - UAS. Default is 1 # Number: 0 - 2 # Mandatory P432 = 1 # UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 # Number: 1, 2 # Mandatory P433 = 1 # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE). # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P431 = 0 ############################################################### # Account 2/Codec Settings ############################################################### ############################################################### # Account 2/Codec Settings/Audio ############################################################### # Preferred Vocoder # 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 98 - iLBC, 123 - OPUS, 103 - G.726-16, 104 - G.726.24, 105 - G.726.40 # Number: 0, 2, 4, 8, 9, 18, 98, 123, 103, 104, 105 # choice 1. Default is 9 # Mandatory P451 = 9 # choice 2. Default is 123 # Mandatory P452 = 123 # choice 3. Default is 0 # Mandatory P453 = 0 # choice 4. Default is 8 # Mandatory P454 = 8 # choice 5. Default is 4 # Mandatory P455 = 4 # choice 6. Default is 18 # Mandatory P456 = 18 # choice 7. Default is 98 # Mandatory P457 = 98 # choice 8. Default is 2 # Mandatory P458 = 2 # Codec Negotiation Priority. 0 - Caller, 1 - Callee. Default is 1 # Number: 0, 1 # Mandatory P29161 = 1 # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2448 = 0 # iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 # Number: 0, 1 # Mandatory P495 = 1 # iLBC Payload Type. Default is 97 # Number: 96 - 127 # Mandatory P494 = 97 # G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0 # Number: 0, 1 # Mandatory P2423 = 0 # G.726-32 Dynamic Payload Type. Default is 127 # Number: 96 - 127 # Mandatory P2465 = 127 # OPUS Payload Type. Default is 123 # Number: 96 - 127 # Mandatory P2485 = 123 # Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2401 = 0 # Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P2402 = 1 # Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2403 = 0 # DTMF Payload Type. Default is 101 # Number: 96 - 127 # Mandatory P496 = 101 # Inbound DTMF Volume. Default is 18 # Number： 0 - 32 # Mandatory P60179 = 18 # Enable Audio RED with FEC. Default is 1. # Number: 0, 1 # Mandatory P26173 = 1 # Audio FEC Payload Type. Default is 121. # Number: 96-126 # Mandatory P26174 = 121 # Audio RED Payload Type. Default is 124. # Number: 96-126 # Mandatory P26175 = 124 # Silence Suppression. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P485 = 0 # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 # Number: 0, 1 # Mandatory P498 = 1 # Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms # Default is 2 # Number: 0, 1, 2, 3, 4, 5, 6, 7 # Mandatory P497 = 2 # Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 # Number: 1 - 6 # Mandatory P486 = 2 # G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 # Number: 0, 1 # Mandatory P493 = 1 ############################################################### # Account 2/Codec Settings/RTP Settings ############################################################### # SRTP Mode. 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P443 = 0 # SRTP Key Length. 0 - AES 128&256 bit, 1 - AES 128 bit, 2 - AES 256 bit. Default is 0 # Default is 0 # Number: 0,1 # Mandatory P2483 = 0 # Crypto Life Time # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P2463 = 1 # RTCP Mode # Number: 0, 1, 2, 3. 0 - Default, 1 - Negotiated, 2- RTCP Mux, 3 - RTCP Mux Only. Default is 0 # Mandatory P60160 = 0 # RTCP Keep-Alive method # Number: 1, 2. 1 - Receiver Report, 2 - Sender Report. Default is 1. # Mandatory P60166 = 1 # RTP Keep-Alive method # Number: 0, 1. 0 - No, 1 - RTP Version 1. Default is 1. # Mandatory P60167 = 1 # VQ RTCP-XR # VQ RTCP-XR Collector Name. # String P26193 = # VQ RTCP-XR Collector Address. # String P26194 = # VQ RTCP-XR Collector Port # String P26195 = 5060 # Symmetric RTP. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P460 = 0 # RTP Timeout (s). Default is 30. # Number: 0, 6 - 600. # Mandatory P29168 = 0 ############################################################### # Account 2/Call Settings ############################################################### ############################################################### # Account 2/Call Settings/Call Features ############################################################### # Key as Send. 0 - Disabled, 1 - Pound (#), 2 - Star (*). Default is 1 # Number: 0, 1, 2 # Mandatory P492 = 1 # No Key Entry Timeout (in seconds). Default is 4 # Number: 1 - 15 # Mandatory P491 = 4 # Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P421 = 0 # Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P446 = 0 # Enable Call Waiting. 0 - Default, 1 - Yes, 2 - No. Default is 0 # Number: 0, 1, 2 # Mandatory P26163 = 0 # RFC2543 Hold. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26162= 0 # Ring Timeout (in seconds). Default is 60 # Number: 30 - 3600 # Mandatory P476 = 60 # Call Log. 0 - Log All Calls, 1 - Log Incoming/Outgoing only (missed calls NOT recorded), 2 - Disable Call Log. Default is 0 # Number: 0, 1, 2 # Mandatory P442 = 0 # Auto Answer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P425 = 0 # Auto Answer Numbers. Up to 10 numbers. Each number is seperated by a semi-colon # String P29164 = # Play warning tone for Auto Answer Intercom. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26172 = 1 # Custom Alert-Info for Auto Answer. # String P2456 = # Allow Auto Answer by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P438 = 1 # Allow Barging by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26119 = 0 # Mute on Intercom Auto Answer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26171 = 0 # Record # Record Key Default Function. 0 - Record On, 1 - Record Off P29166 = 0 # Call Recording On # String P26128 = # Call Recording Off # String P26129 = # Transfer # Transfer on Conference Hangup. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2404 = 0 # Transfer to VM feature code # Strings. Default is * P60192 = * # Enable Recovery on Blind Transfer. 0 - Yes, 1 - No. Default is 0 # Number: 0, 1 # Mandatory P2484 = 0 # Blind Transfer Wait Timeout. Default is 30 # Number: 30 - 300 # Mandatory P26170 = 30 # Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P469 = 0 # Call Forward No Answer Timeout (s). Default is 12 # Number: 1 - 120 # Mandatory # P470 = 12 # Enable Override Forward. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60162 = 0 # Override Forward Numbers # Strings P60163 = ############################################################### # Account 2/Call Settings/Dial Plan ############################################################### # Dial Plan Prefix # String P419 = # Bypass Dial Plan # String: contact,incoming,outgoing,dialing,mpk,api P2482 = mpk # Dial Plan. Default is { x+ | \+x+ | *x+ | *xx*x+ } # String # Mandatory P459= { x+ | \+x+ | *x+ | *xx*x+ } ############################################################### # Account 2/Call Settings/Call Display ############################################################### # Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 2 # Number: 0, 1, 2 # Mandatory P2424 = 2 # Callee ID Display. 0 - Auto, 1 - Disabled, 2 - To Header. Default is 0 # Number: 0, 1, 2 # Mandatory P26125 = 0 ############################################################### # Account 2/Call Settings/Ringtone ############################################################### # Ringback Tone at No Early Media # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60173 = 0 # Account Ring Tone. # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P423 = 0 # Matching Incoming Caller ID. Matching Rule 1 # String P1494 = # Matching Rule 1 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1495 = 0 # Matching Incoming Caller ID. Matching Rule 2 # String P1496 = # Matching Rule 2 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1497 = 0 # Matching Incoming Caller ID. Matching Rule 3 # String P1498 = # Matching Rule 3 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1499 = 0 # Matching Incoming Caller ID. Matching Rule 4 # String P6722 = # Matching Rule 4 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6723 = 0 # Matching Incoming Caller ID. Matching Rule 5 # String P6724 = # Matching Rule 5 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6725 = 0 # Matching Incoming Caller ID. Matching Rule 6 # String P6726 = # Matching Rule 6 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6727 = 0 # Matching Incoming Caller ID. Matching Rule 7 # String P26164 = # Matching Rule 7 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26165 = 0 # Matching Incoming Caller ID. Matching Rule 8 # String P26166 = # Matching Rule 8 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26167 = 0 # Matching Incoming Caller ID. Matching Rule 9 # String P26168 = # Matching Rule 9 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26169 = 0 # Matching Incoming Caller ID. Matching Rule 10 # String P26196 = # Matching Rule 10 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26197 = 0 ############################################################### # Account 2/Advanced Settings ############################################################### ############################################################### # Account 2/Advanced Settings/Security Settings ############################################################### # Check Domain Certificates. When set to Yes/Enabled, domain certificate will be checked as defined in RFC5922 # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2411 = 0 # Trusted Domain Name List # String P60182 = # Validate Certification Chain. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2467 = 0 # Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2406 = 0 # Omit charset=UTF-8 in MESSAGE. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2455 = 0 # Allow Unsolicited REFER. 0 - Disabled, 1 - Enabled, 2 - Enabled/Force Auth. Default is 0 # Number: 0, 1, 2 # Mandatory P26123 = 0 # Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2447 = 0 # Check SIP User ID for Incoming INVITE. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P449 = 0 # Allow SIP Reset # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26115 = 0 # Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2446 = 0 ############################################################### # Account 2/Advanced Settings/MOH ############################################################### # On Hold Reminder Tone. 0 - Disabled, 1 - Enable. Default is 1 # Number: 0, 1 # Mandatory P26106 = 1 # Music On Hold URI # String P2450 = ############################################################### # Account 2/Advanced Settings/Advanced Features ############################################################### # Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, # 109 - RNK, 110 - Sylantro, 117 - Huawei IMS, 119 - Phonepower, 120 - UCM Call Center, 137 - Zoom # Default is 100 # Number: 100, 101, 102, 108, 109, 110, 117, 119, 120, 137 # Mandatory P424 = 100 # Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0. # Number: 0, 1 # Mandatory P2425 = 0 # Conference URI # String P2418 = # Broadsoft # Broadsoft Call Center. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2441 = 0 # Hoteling Event. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2442 = 0 # Call Center Status. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2443 = 0 # Broadsoft Executive Assistant. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2464 = 0 # Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2488 = 0 ############################################################### # Account 2/Advanced Settings/BLF(Busy Lamp Field) 2604 only ############################################################### # Presence Eventlist URI # String P26184 = # Eventlist BLF URI # String P444 = # Auto Provision Eventlists. 0 - Disabled, 1 - BLF Eventlist, 2 - Presence Eventlist. Default is 0 # Number:0,1,2 # Mandatory P2489 = 0 # BLF Call-pickup. 0 - Auto, 1 - Force BLF Call-pickup by prefix, 2 - Disabled. Default is 0 # Number: 0, 1, 2 # Mandatory P6753 = 0 # BLF Call-pickup Prefix. Default is ** # String # Mandatory P481 = ** # Call Pickup Barge-In Code # String P26146 = # PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P488 = 0 ############################################################### # Account 2/SCA ############################################################### # Line-Seize Timeout (in seconds). Default is 15 # Number: 15 - 60 # Mandatory P2413 = 15 ############################################################### # Account 2/Call Park ############################################################### # Call Park Feature Code # String P60169 = # Call Park Retrieve Feature Code # String P2436 = ############################################################### # Account 2/Hidden Number Plan ############################################################### # Hidden Number Features # Number: 0,1,2,3. 0-None of Calls, 1-Incoming Calls, 2-Outgoing Calls, 3-Booth Direction Calls. Default is 0. # Mandatory P26143 = 0 # Hidden Number Plan List # String P60158 = { x+(xxxx)xxxx | xx(xx+)xx | x(xx+)x | x(x+) | (x+) } ############################################################### # Account 2/Feature Codes ############################################################### #Enable Local Call Features. 0 - No, 1 - Yes. Default is 1 #Number: 0, 1 #Mandatory P420 = 1 #Do Not Disturb (DND) - On # String P2444 = #Do Not Disturb (DND) - Off # String P2445 = # Call Forward Always - On # String P26113 = # Call Forward Always - Off # String P26114 = # Call Forward Always - Target # String P29192 = #Call Forward Busy - On # String P26109 = #Call Forward Busy - Off # String P26110 = #Call Forward Busy - Target # String P29193 = #Call Forward No Answer - On #String P26111 = #Call Forward No Answer - Off #String P26112 = #Call Forward No Answer - Target #String P29194 = # Call Forward No Answer Timeout (s). Default is 12 # Number: 1 - 120 # Mandatory P470 = 12 #################################################################### # Account 3(GRP2602/2603/2604 only) ## #################################################################### ############################################################### # Account 3/General Settings ############################################################### ############################################################### # Account 3/General Settings/Account Register ############################################################### # Account Active. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P501 = 0 # Account Name # String P517 = # SIP Server # String P502 = # Secondary SIP Server # String P2512 = # Outbound Proxy # String P503 = # Backup Outbound Proxy # String P2533 = # SIP User ID # String P504 = # SIP Authentication ID # String P505 = # SIP Authentication Password # String P506 = # Name # String P507 = # TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 # Number: 0, 1, 2 # Mandatory P509 = 0 # Voicemail Access Number # String P526 = # BLF Server # String P2575 = # Account Display # Number: 0, 1. 0 - User Name, 1 - User ID. Default is 0 # Mandatory P2580 = 0 # UCM User Password # String P60261 = ############################################################### # Account 3/General Settings/Network Settings ############################################################### # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P508 = 0 # NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 4. # Number: 0, 1, 2, 3, 4, 5 # Mandatory P514 = 4 # Support Rport (RFC3581). 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P547 = 1 # Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters # String P518 = # Use SBC. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26290 = 0 # Maximum Number of SIP Request Retries # Number: 1 - 10 # Mandatory P60255 = 4 # DNS SRV Failover Mode. 0 - Default, 1 - Saved one until DNS TTL, 2 - Saved one until no response. Default is 0 # Number: 0,1,2 # Mandatory P26240 = 0 # Register Before DNS SRV Fail-over. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P29295 = 0 # Failback Expiration (m) # Number P60256 = 60 # DNS Mode--Use Configured IP # Primary IP. Maximum 15 characters # String P2508 = # Backup IP 1 # String P2509 = # Backup IP 2 # String P2510 = ############################################################### # Account 3/SIP Settings ############################################################### ############################################################### # Account 3/SIP Settings/Basic Settings ############################################################### # SIP Registration. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P510 = 1 # Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0 # Number: 0, 1, 2 # Mandatory P511 = 0 # Register Expiration (in minutes). Default is 60. Max about 45 days # Number: 1 - 64800 # Mandatory P512 = 60 # Subscribe Expiration (in minutes). Default is 60. Max about 45 days # Number: 1 - 64800 # Mandatory P26251 = 60 # Reregister Before Expiration (in seconds). Default is 0 seconds # Number: 0 - 64800 # Mandatory P2530 = 0 # SIP Registration Failure Retry Wait Time (in seconds). Default is 20 # Number: 1 - 3600 # Mandatory P571 = 20 # Add Auth Header On Initial REGISTER. Default is 0 # Number: 0, 1 # Mandatory P2559 = 0 # Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0 # Number: 0,1 # Mandatory P2597 = 0 # OPTIONS Keep Alive Interval. Default is 30 # Number # Mandatory P2598 = 30 # OPTIONS Keep Alive Max Lost. Default is 3 # Number # Mandatory P2599 = 3 # SUBSCRIBE for MWI. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P515 = 0 # SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2519 = 0 # Use Privacy Header # 0 - Default, 1 - No, 2 - Yes. Default is 0 # Number: 0, 1, 2 # Mandatory P2538 = 0 # Use P-Preferred-Identity Header # 0 - Default, 1 - No, 2 - Yes. Default is 0 # Number: 0, 1, 2 # Mandatory P2539 = 0 # Use X-Grandstream-PBX Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26254 = 1 # Use P-Access-Network-Info Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26258 = 1 # Use P-Emergency-Info Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26259 = 1 # Use P-Asserted-Identity Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P29298 = 0 # Use P-Early-Media Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60272 = 0 # Use Zoom E911 X-switch-info SIP Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60270 = 0 # Use MAC Header # 0 - No, 1 - Only for REGISTER, 2 - Yes to all SIP. Default is 0 # Number: 0, 1, 2 # Mandatory P29290 = 0 # Add MAC in User-Agent # 0 - No, 1 - Yes except REGISTER, 2 - Yes to all SIP. Default is 0 # Number: 0, 1, 2 # Mandatory P26261 = 0 # SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS/TCP. Default is 0 # Number: 0, 1, 2 # Mandatory P548 = 0 # Enable TCP Keep-alive.0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P60265 = 1 # SIP Listening Mode. # 0 - Transport Only, 1 - Dual, 2 - Dual (BLF Enforced), 3 - Dual (Secured). Default is 0 # Number: 0,1,2,3 # Mandatory P26224 = 0 # Local SIP Port. Default is 5064 # Number # Mandatory P513 = 5064 # SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1 # Number: 0, 1 # Mandatory P2529 = 1 # Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2531 = 0 # Support SIP Instance ID. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P589 = 1 # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 50 # Number: 50, 100, 200 # Mandatory P540 = 50 # SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400 # Number: 200, 400, 800 # Mandatory P541 = 400 # Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to # Number: 0, 1, 2 # Mandatory P2505 = 0 # Enable 100rel. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P535 = 0 # Use Route Set in NOTIFY(Follow RFC 6665) # Number: 0, 1 # Mandatory P60259 = 1 ############################################################### # Account 3/SIP Settings/Session Timer ############################################################### # Enable Session Timer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2595 = 0 # Session Expiration (in seconds). Default is 180 # Number: 90 - 64800 # Mandatory P534 = 180 # Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P260 # Number: 90 - 64800 # Mandatory P527 = 90 # Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P528 = 0 # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P529 = 0 # Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P530 = 0 # UAC Specify Refresher. 0 - Omit, 1 - UAC, 2 - UAS. Default is 1 # Number: 0 - 2 # Mandatory P532 = 1 # UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 # Number: 1, 2 # Mandatory P533 = 1 # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE). # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P531 = 0 ############################################################### # Account 3/Codec Settings ############################################################### ############################################################### # Account 3/Codec Settings/Audio ############################################################### # Preferred Vocoder # 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 98 - iLBC, 123 - OPUS, 103 - G.726-16, 104 - G.726.24, 105 - G.726.40 # Number: 0, 2, 4, 8, 9, 18, 98, 123, 103, 104, 105 # choice 1. Default is 9 # Mandatory P551 = 9 # choice 2. Default is 123 # Mandatory P552 = 123 # choice 3. Default is 0 # Mandatory P553 = 0 # choice 4. Default is 8 # Mandatory P554 = 8 # choice 5. Default is 4 # Mandatory P555 = 4 # choice 6. Default is 18 # Mandatory P556 = 18 # choice 7. Default is 98 # Mandatory P557 = 98 # choice 8. Default is 2 # Mandatory P558 = 2 # Codec Negotiation Priority. 0 - Caller, 1 - Callee. Default is 1 # Number: 0, 1 # Mandatory P29261 = 1 # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2548 = 0 # iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 # Number: 0, 1 # Mandatory P595 = 1 # iLBC Payload Type. Default is 97 # Number: 96 - 127 # Mandatory P594 = 97 # G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0 # Number: 0, 1 # Mandatory P2523 = 0 # G.726-32 Dynamic Payload Type. Default is 127 # Number: 96 - 127 # Mandatory P2565 = 127 # OPUS Payload Type. Default is 123 # Number: 96 - 127 # Mandatory P2585 = 123 # Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2501 = 0 # Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P2502 = 1 # Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2503 = 0 # DTMF Payload Type. Default is 101 # Number: 96 - 127 # Mandatory P596 = 101 # Inbound DTMF Volume. Default is 18 # Number： 0 - 32 # Mandatory P60279 = 18 # Enable Audio RED with FEC. Default is 1. # Number: 0, 1 # Mandatory P26273 = 1 # Audio FEC Payload Type. Default is 121. # Number: 96-126 # Mandatory P26274 = 121 # Audio RED Payload Type. Default is 124. # Number: 96-126 # Mandatory P26275 = 124 # Silence Suppression. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P585 = 0 # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 # Number: 0, 1 # Mandatory P598 = 1 # Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms # Default is 2 # Number: 0, 1, 2, 3, 4, 5, 6, 7 # Mandatory P597 = 2 # Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 # Number: 1 - 6 # Mandatory P586 = 2 # G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 # Number: 0, 1 # Mandatory P593 = 1 ############################################################### # Account 3/Codec Settings/RTP Settings ############################################################### # SRTP Mode. 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P543 = 0 # SRTP Key Length. 0 - AES 128&256 bit, 1 - AES 128 bit, 2 - AES 256 bit. Default is 0 # Default is 0 # Number: 0,1 # Mandatory P2583 = 0 # Crypto Life Time # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P2563 = 1 # RTCP Mode # Number: 0, 1, 2, 3. 0 - Default, 1 - Negotiated, 2- RTCP Mux, 3 - RTCP Mux Only. Default is 0 # Mandatory P60260 = 0 # RTCP Keep-Alive method # Number: 1, 2. 1 - Receiver Report, 2 - Sender Report. Default is 1. # Mandatory P60266 = 1 # RTP Keep-Alive method # Number: 0, 1. 0 - No, 1 - RTP Version 1. Default is 1. # Mandatory P60267 = 1 # VQ RTCP-XR # VQ RTCP-XR Collector Name. # String P26293 = # VQ RTCP-XR Collector Address. # String P26294 = # VQ RTCP-XR Collector Port # String P26295 = 5060 # Symmetric RTP. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P560 = 0 # RTP Timeout (s). Default is 30. # Number: 0, 6 - 600. # Mandatory P29268 = 0 ############################################################### # Account 3/Call Settings ############################################################### ############################################################### # Account 3/Call Settings/Call Features ############################################################### # Auto Answer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P525 = 0 # Auto Answer Numbers. Up to 10 numbers. Each number is seperated by a semi-colon # String P29264 = # Play warning tone for Auto Answer Intercom. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26272 = 1 # Custom Alert-Info for Auto Answer. # String P2556 = # Allow Auto Answer by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P538 = 1 # Allow Barging by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26219 = 0 # Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P521 = 0 # Intercept Anonymous Calls. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P546 = 0 # Call Log 0 - Log All Calls, 1 - Log Incoming/Outgoing only (missed calls NOT recorded), 2 - Disable Call Log. Default is 0 # Number: 0, 1, 2 # Mandatory P542 = 0 # Mute on Intercom Auto Answer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26271 = 0 # Transfer on Conference Hangup. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2504 = 0 # Transfer to VM feature code # Strings. Default is * P60292 = * # Key as Send. 0 - Disabled, 1 - Pound (#), 2 - Star (*). Default is 1 # Number: 0, 1, 2 # Mandatory P592 = 1 # Record Key Default Function. 0 - Record On, 1 - Record Off P29266 = 0 # Call Recording On # String P26228 = # Call Recording Off # String P26229 = # Enable Recovery on Blind Transfer. 0 - Yes, 1 - No. Default is 0 # Number: 0, 1 # Mandatory P2584 = 0 # Blind Transfer Wait Timeout. Default is 30 # Number: 30 - 300 # Mandatory P26270 = 30 # No Key Entry Timeout (in seconds). Default is 4 # Number: 1 - 15 # Mandatory P591 = 4 # Ring Timeout (in seconds). Default is 60 # Number: 30 - 3600 # Mandatory P576 = 60 # Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P569 = 0 # RFC2543 Hold. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26262= 0 # Enable Call Waiting. 0 - Default, 1 - Yes, 2 - No. Default is 0 # Number: 0, 1, 2 # Mandatory P26263 = 0 # Enable Override Forward. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60262 = 0 # Override Forward Numbers # Strings P60263 = ############################################################### # Account 3/Call Settings/Dial Plan ############################################################### # Dial Plan Prefix # String P519 = # Bypass Dial Plan # String: contact,incoming,outgoing,dialing,mpk,api P2582 = mpk # Dial Plan. Default is { x+ | \+x+ | *x+ | *xx*x+ } # String # Mandatory P559= { x+ | \+x+ | *x+ | *xx*x+ } ############################################################### # Account 3/Call Settings/Call Display ############################################################### # Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 2 # Number: 0, 1, 2 # Mandatory P2524 = 2 # Callee ID Display. 0 - Auto, 1 - Disabled, 2 - To Header. Default is 0 # Number: 0, 1, 2 # Mandatory P26225 = 0 ############################################################### # Account 3/Call Settings/Ringtone ############################################################### # Ringback Tone at No Early Media # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60273 = 0 # Account Ring Tone. # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P523 = 0 # Matching Incoming Caller ID. Matching Rule 1 # String P1500 = # Matching Rule 1 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1501 = 0 # Matching Incoming Caller ID. Matching Rule 2 # String P1502 = # Matching Rule 2 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1503 = 0 # Matching Incoming Caller ID. Matching Rule 3 # String P1504 = # Matching Rule 3 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1505 = 0 # Matching Incoming Caller ID. Matching Rule 4 # String P6728 = # Matching Rule 4 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6729 = 0 # Matching Incoming Caller ID. Matching Rule 5 # String P6730 = # Matching Rule 5 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6731 = 0 # Matching Incoming Caller ID. Matching Rule 6 # String P6732 = # Matching Rule 6 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6733 = 0 # Matching Incoming Caller ID. Matching Rule 7 # String P26264 = # Matching Rule 7 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26265 = 0 # Matching Incoming Caller ID. Matching Rule 8 # String P26266 = # Matching Rule 8 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26267 = 0 # Matching Incoming Caller ID. Matching Rule 9 # String P26268 = # Matching Rule 9 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26269 = 0 # Matching Incoming Caller ID. Matching Rule 10 # String P26296 = # Matching Rule 10 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26297 = 0 ############################################################### # Account 3/Advanced Settings ############################################################### ############################################################### # Account 3/Advanced Settings/Security Settings ############################################################### # Check Domain Certificates. When set to Yes/Enabled, domain certificate will be checked as defined in RFC5922 # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2511 = 0 # Trusted Domain Name List # String P60282 = # Validate Certification Chain. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2567 = 0 # Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2506 = 0 # Omit charset=UTF-8 in MESSAGE. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2555 = 0 # Allow Unsolicited REFER. 0 - Disabled, 1 - Enabled, 2 - Enabled/Force Auth. Default is 0 # Number: 0, 1, 2 # Mandatory P26223 = 0 # Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2547 = 0 # Check SIP User ID for Incoming INVITE. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P549 = 0 # Allow SIP Reset # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26215 = 0 # Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2546 = 0 ############################################################### # Account 3/Advanced Settings/MOH ############################################################### # On Hold Reminder Tone. 0 - Disabled, 1 - Enable. Default is 1 # Number: 0, 1 # Mandatory P26206 = 1 # Music On Hold URI # String P2550 = ############################################################### # Account 3/Advanced Settings/Advanced Features ############################################################### # Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, # 109 - RNK, 110 - Sylantro, 117 - Huawei IMS, 119 - Phonepower, 120 - UCM Call Center, 137 - Zoom # Default is 100 # Number: 100, 101, 102, 108, 109, 110, 117, 119, 120, 137 # Mandatory P524 = 100 # Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0. # Number: 0, 1 # Mandatory P2525 = 0 # Conference URI # String P2518 = # Broadsoft # Broadsoft Call Center. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2541 = 0 # Hoteling Event. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2542 = 0 # Call Center Status. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2543 = 0 # Broadsoft Executive Assistant. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2564 = 0 # Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2588 = 0 ############################################################### # Account 3/Advanced Settings/BLF(Busy Lamp Field) 2604 only ############################################################### # Presence Eventlist URI # String P26284 = # Eventlist BLF URI # String P544 = # Auto Provision Eventlists. 0 - Disabled, 1 - BLF Eventlist, 2 - Presence Eventlist. Default is 0 # Number:0,1,2 # Mandatory P2589 = 0 # BLF Call-pickup. 0 - Auto, 1 - Force BLF Call-pickup by prefix, 2 - Disabled. Default is 0 # Number: 0, 1, 2 # Mandatory P6754 = 0 # BLF Call-pickup Prefix. Default is ** # String # Mandatory P581 = ** # Call Pickup Barge-In Code # String P26246 = # PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P588 = 0 ############################################################### # Account 3/SCA ############################################################### # Line-Seize Timeout (in seconds). Default is 15 # Number: 15 - 60 # Mandatory P2513 = 15 ############################################################### # Account 3/Call Park ############################################################### # Call Park Feature Code # String P60269 = # Call Park Retrieve Feature Code # String P2536 = ############################################################### # Account 3/Hidden Number Plan ############################################################### # Hidden Number Features # Number: 0,1,2,3. 0-None of Calls, 1-Incoming Calls, 2-Outgoing Calls, 3-Booth Direction Calls. Default is 0. # Mandatory P26243 = 0 # Hidden Number Plan List # String P60258 = { x+(xxxx)xxxx | xx(xx+)xx | x(xx+)x | x(x+) | (x+) } ############################################################### # Account 3/Feature Codes ############################################################### #Enable Local Call Features. 0 - No, 1 - Yes. Default is 1 #Number: 0, 1 #Mandatory P520 = 1 #Do Not Disturb (DND) - On # String P2544 = #Do Not Disturb (DND) - Off # String P2545 = # Call Forward Always - On # String P26213 = # Call Forward Always - Off # String P26214 = # Call Forward Always - Target # String P29292 = #Call Forward Busy - On # String P26209 = #Call Forward Busy - Off # String P26210 = #Call Forward Busy - Target # String P29293 = #Call Forward No Answer - On #String P26211 = #Call Forward No Answer - Off #String P26212 = #Call Forward No Answer - Target #String P29294 = # Call Forward No Answer Timeout (s). Default is 12 # Number: 1 - 120 # Mandatory P570 = 12 #################################################################### # Account 4(GRP2602/2603/2604 only) ## #################################################################### ############################################################### # Account 4/General Settings ############################################################### ############################################################### # Account 4/General Settings/Account Register ############################################################### # Account Active. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P601 = 0 # Account Name # String P617 = # SIP Server # String P602 = # Secondary SIP Server # String P2612 = # Outbound Proxy # String P603 = # Backup Outbound Proxy # String P2633 = # SIP User ID # String P604 = # SIP Authentication ID # String P605 = # SIP Authentication Password # String P606 = # Name # String P607 = # TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 # Number: 0, 1, 2 # Mandatory P609 = 0 # Voicemail Access Number # String P626 = # BLF Server # String P2675 = # Account Display # Number: 0, 1. 0 - User Name, 1 - User ID. Default is 0 # Mandatory P2680 = 0 # UCM User Password # String P60361 = ############################################################### # Account 4/General Settings/Network Settings ############################################################### # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P608 = 0 # NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 4. # Number: 0, 1, 2, 3, 4, 5 # Mandatory P614 = 4 # Support Rport (RFC3581). 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P647 = 1 # Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters # String P618 = # Use SBC. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26390 = 0 # Maximum Number of SIP Request Retries # Number: 1 - 10 # Mandatory P60355 = 4 # DNS SRV Failover Mode. 0 - Default, 1 - Saved one until DNS TTL, 2 - Saved one until no response. Default is 0 # Number: 0,1,2 # Mandatory P26340 = 0 # Register Before DNS SRV Fail-over. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P29395 = 0 # Failback Expiration (m) # Number P60356 = 60 # DNS Mode--Use Configured IP # Primary IP. Maximum 15 characters # String P2608 = # Backup IP 1 # String P2609 = # Backup IP 2 # String P2610 = ############################################################### # Account 4/SIP Settings ############################################################### ############################################################### # Account 4/SIP Settings/Basic Settings ############################################################### # SIP Registration. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P610 = 1 # Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0 # Number: 0, 1, 2 # Mandatory P611 = 0 # Register Expiration (in minutes). Default is 60. Max about 45 days # Number: 1 - 64800 # Mandatory P612 = 60 # Subscribe Expiration (in minutes). Default is 60. Max about 45 days # Number: 1 - 64800 # Mandatory P26351 = 60 # Reregister Before Expiration (in seconds). Default is 0 seconds # Number: 0 - 64800 # Mandatory P2630 = 0 # SIP Registration Failure Retry Wait Time (in seconds). Default is 20 # Number: 1 - 3600 # Mandatory P671 = 20 # Add Auth Header On Initial REGISTER. Default is 0 # Number: 0, 1 # Mandatory P2659 = 0 # Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0 # Number: 0,1 # Mandatory P2697 = 0 # OPTIONS Keep Alive Interval. Default is 30 # Number # Mandatory P2698 = 30 # OPTIONS Keep Alive Max Lost. Default is 3 # Number # Mandatory P2699 = 3 # SUBSCRIBE for MWI. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P615 = 0 # SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2619 = 0 # Use Privacy Header # 0 - Default, 1 - No, 2 - Yes. Default is 0 # Number: 0, 1, 2 # Mandatory P2638 = 0 # Use P-Preferred-Identity Header # 0 - Default, 1 - No, 2 - Yes. Default is 0 # Number: 0, 1, 2 # Mandatory P2639 = 0 # Use X-Grandstream-PBX Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26354 = 1 # Use P-Access-Network-Info Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26358 = 1 # Use P-Emergency-Info Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26359 = 1 # Use P-Asserted-Identity Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P29398 = 0 # Use P-Early-Media Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60372 = 0 # Use Zoom E911 X-switch-info SIP Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60370 = 0 # Use MAC Header # 0 - No, 1 - Only for REGISTER, 2 - Yes to all SIP. Default is 0 # Number: 0, 1, 2 # Mandatory P29390 = 0 # Add MAC in User-Agent # 0 - No, 1 - Yes except REGISTER, 2 - Yes to all SIP. Default is 0 # Number: 0, 1, 2 # Mandatory P26361 = 0 # SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS/TCP. Default is 0 # Number: 0, 1, 2 # Mandatory P648 = 0 # Enable TCP Keep-alive.0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P60365 = 1 # SIP Listening Mode. # 0 - Transport Only, 1 - Dual, 2 - Dual (BLF Enforced), 3 - Dual (Secured). Default is 0 # Number: 0,1,2,3 # Mandatory P26324 = 0 # Local SIP Port. Default is 5066 # Number # Mandatory P613 = 5066 # SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1 # Number: 0, 1 # Mandatory P2629 = 1 # Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2631 = 0 # Support SIP Instance ID. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P689 = 1 # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 50 # Number: 50, 100, 200 # Mandatory P640 = 50 # SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400 # Number: 200, 400, 800 # Mandatory P641 = 400 # Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to # Number: 0, 1, 2 # Mandatory P2605 = 0 # Enable 100rel. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P635 = 0 # Use Route Set in NOTIFY(Follow RFC 6665) # Number: 0, 1 # Mandatory P60359 = 1 ############################################################### # Account 4/SIP Settings/Session Timer ############################################################### # Enable Session Timer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2695 = 0 # Session Expiration (in seconds). Default is 180 # Number: 90 - 64800 # Mandatory P634 = 180 # Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P260 # Number: 90 - 64800 # Mandatory P627 = 90 # Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P628 = 0 # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P629 = 0 # Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P630 = 0 # UAC Specify Refresher. 0 - Omit, 1 - UAC, 2 - UAS. Default is 1 # Number: 0 - 2 # Mandatory P632 = 1 # UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 # Number: 1, 2 # Mandatory P633 = 1 # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE). # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P631 = 0 ############################################################### # Account 4/Codec Settings ############################################################### ############################################################### # Account 4/Codec Settings/Audio ############################################################### # Preferred Vocoder # 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 98 - iLBC, 123 - OPUS, 103 - G.726-16, 104 - G.726.24, 105 - G.726.40 # Number: 0, 2, 4, 8, 9, 18, 98, 123, 103, 104, 105 # choice 1. Default is 9 # Mandatory P651 = 9 # choice 2. Default is 123 # Mandatory P652 = 123 # choice 3. Default is 0 # Mandatory P653 = 0 # choice 4. Default is 8 # Mandatory P654 = 8 # choice 5. Default is 4 # Mandatory P655 = 4 # choice 6. Default is 18 # Mandatory P656 = 18 # choice 7. Default is 98 # Mandatory P657 = 98 # choice 8. Default is 2 # Mandatory P658 = 2 # Codec Negotiation Priority. 0 - Caller, 1 - Callee. Default is 1 # Number: 0, 1 # Mandatory P29361 = 1 # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2648 = 0 # iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 # Number: 0, 1 # Mandatory P695 = 1 # iLBC Payload Type. Default is 97 # Number: 96 - 127 # Mandatory P694 = 97 # G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0 # Number: 0, 1 # Mandatory P2623 = 0 # G.726-32 Dynamic Payload Type. Default is 127 # Number: 96 - 127 # Mandatory P2665 = 127 # OPUS Payload Type. Default is 123 # Number: 96 - 127 # Mandatory P2685 = 123 # Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2601 = 0 # Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P2602 = 1 # Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2603 = 0 # DTMF Payload Type. Default is 101 # Number: 96 - 127 # Mandatory P696 = 101 # Inbound DTMF Volume. Default is 18 # Number： 0 - 32 # Mandatory P60379 = 18 # Enable Audio RED with FEC. Default is 1. # Number: 0, 1 # Mandatory P26373 = 1 # Audio FEC Payload Type. Default is 121. # Number: 96-126 # Mandatory P26374 = 121 # Audio RED Payload Type. Default is 124. # Number: 96-126 # Mandatory P26375 = 124 # Silence Suppression. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P685 = 0 # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 # Number: 0, 1 # Mandatory P698 = 1 # Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms # Default is 2 # Number: 0, 1, 2, 3, 4, 5, 6, 7 # Mandatory P697 = 2 # Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 # Number: 1 - 6 # Mandatory P686 = 2 # G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 # Number: 0, 1 # Mandatory P693 = 1 ############################################################### # Account 4/Codec Settings/RTP Settings ############################################################### # SRTP Mode. 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P643 = 0 # SRTP Key Length. 0 - AES 128&256 bit, 1 - AES 128 bit, 2 - AES 256 bit. Default is 0 # Default is 0 # Number: 0,1 # Mandatory P2683 = 0 # Crypto Life Time # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P2663 = 1 # RTCP Mode # Number: 0, 1, 2, 3. 0 - Default, 1 - Negotiated, 2- RTCP Mux, 3 - RTCP Mux Only. Default is 0 # Mandatory P60360 = 0 # RTCP Keep-Alive method # Number: 1, 2. 1 - Receiver Report, 2 - Sender Report. Default is 1. # Mandatory P60366 = 1 # RTP Keep-Alive method # Number: 0, 1. 0 - No, 1 - RTP Version 1. Default is 1. # Mandatory P60367 = 1 # VQ RTCP-XR # VQ RTCP-XR Collector Name. # String P26393 = # VQ RTCP-XR Collector Address. # String P26394 = # VQ RTCP-XR Collector Port # String P26395 = 5060 # Symmetric RTP. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P660 = 0 # RTP Timeout (s). Default is 30. # Number: 0, 6 - 600. # Mandatory P29368 = 0 ############################################################### # Account 4/Call Settings ############################################################### ############################################################### # Account 4/Call Settings/Call Features ############################################################### # Auto Answer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P625 = 0 # Auto Answer Numbers. Up to 10 numbers. Each number is seperated by a semi-colon # String P29364 = # Play warning tone for Auto Answer Intercom. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26372 = 1 # Custom Alert-Info for Auto Answer. # String P2656 = # Allow Auto Answer by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P638 = 1 # Allow Barging by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26319 = 0 # Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P621 = 0 # Intercept Anonymous Calls. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P646 = 0 # Call Log. 0 - Log All Calls, 1 - Log Incoming/Outgoing only (missed calls NOT recorded), 2 - Disable Call Log. Default is 0 # Number: 0, 1, 2 # Mandatory P642 = 0 # Mute on Intercom Auto Answer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26371 = 0 # Transfer on Conference Hangup. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2604 = 0 # Transfer to VM feature code # Strings. Default is * P60392 = * # Key as Send. 0 - Disabled, 1 - Pound (#), 2 - Star (*). Default is 1 # Number: 0, 1, 2 # Mandatory P692 = 1 # Record Key Default Function. 0 - Record On, 1 - Record Off P29366 = 0 # Call Recording On # String P26328 = # Call Recording Off # String P26329 = # Enable Recovery on Blind Transfer. 0 - Yes, 1 - No. Default is 0 # Number: 0, 1 # Mandatory P2684 = 0 # Blind Transfer Wait Timeout. Default is 30 # Number: 30 - 300 # Mandatory P26370 = 30 # No Key Entry Timeout (in seconds). Default is 4 # Number: 1 - 15 # Mandatory P691 = 4 # Ring Timeout (in seconds). Default is 60 # Number: 30 - 3600 # Mandatory P676 = 60 # Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P669 = 0 # RFC2543 Hold. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26362= 0 # Enable Call Waiting. 0 - Default, 1 - Yes, 2 - No. Default is 0 # Number: 0, 1, 2 # Mandatory P26363 = 0 # Enable Override Forward. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60362 = 0 # Override Forward Numbers # Strings P60363 = ############################################################### # Account 4/Call Settings/Dial Plan ############################################################### # Dial Plan Prefix # String P619 = # Bypass Dial Plan # String: contact,incoming,outgoing,dialing,mpk,api P2682 = mpk # Dial Plan. Default is { x+ | \+x+ | *x+ | *xx*x+ } # String # Mandatory P659= { x+ | \+x+ | *x+ | *xx*x+ } ############################################################### # Account 4/Call Settings/Call Display ############################################################### # Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 2 # Number: 0, 1, 2 # Mandatory P2624 = 2 # Callee ID Display. 0 - Auto, 1 - Disabled, 2 - To Header. Default is 0 # Number: 0, 1, 2 # Mandatory P26325 = 0 ############################################################### # Account 4/Call Settings/Ringtone ############################################################### # Ringback Tone at No Early Media # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60373 = 0 # Account Ring Tone. # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P623 = 0 # Matching Incoming Caller ID. Matching Rule 1 # String P1506 = # Matching Rule 1 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1507 = 0 # Matching Incoming Caller ID. Matching Rule 2 # String P1508 = # Matching Rule 2 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1509 = 0 # Matching Incoming Caller ID. Matching Rule 3 # String P1510 = # Matching Rule 3 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1511 = 0 # Matching Incoming Caller ID. Matching Rule 4 # String P6734 = # Matching Rule 4 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6735 = 0 # Matching Incoming Caller ID. Matching Rule 5 # String P6736 = # Matching Rule 5 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6737 = 0 # Matching Incoming Caller ID. Matching Rule 6 # String P6738 = # Matching Rule 6 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6739 = 0 # Matching Incoming Caller ID. Matching Rule 7 # String P26364 = # Matching Rule 7 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26365 = 0 # Matching Incoming Caller ID. Matching Rule 8 # String P26366 = # Matching Rule 8 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26367 = 0 # Matching Incoming Caller ID. Matching Rule 9 # String P26368 = # Matching Rule 9 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26369 = 0 # Matching Incoming Caller ID. Matching Rule 10 # String P26396 = # Matching Rule 10 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26397 = 0 ############################################################### # Account 4/Advanced Settings ############################################################### ############################################################### # Account 4/Advanced Settings/Security Settings ############################################################### # Check Domain Certificates. When set to Yes/Enabled, domain certificate will be checked as defined in RFC5922 # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2611 = 0 # Trusted Domain Name List # String P60382 = # Validate Certification Chain. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2667 = 0 # Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2606 = 0 # Omit charset=UTF-8 in MESSAGE. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2655 = 0 # Allow Unsolicited REFER. 0 - Disabled, 1 - Enabled, 2 - Enabled/Force Auth. Default is 0 # Number: 0, 1, 2 # Mandatory P26323 = 0 # Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2647 = 0 # Check SIP User ID for Incoming INVITE. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P649 = 0 # Allow SIP Reset # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26315 = 0 # Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2646 = 0 ############################################################### # Account 4/Advanced Settings/MOH ############################################################### # On Hold Reminder Tone. 0 - Disabled, 1 - Enable. Default is 1 # Number: 0, 1 # Mandatory P26306 = 1 # Music On Hold URI # String P2650 = ############################################################### # Account 4/Advanced Settings/Advanced Features ############################################################### # Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, # 109 - RNK, 110 - Sylantro, 117 - Huawei IMS, 119 - Phonepower, 120 - UCM Call Center, 137 - Zoom # Default is 100 # Number: 100, 101, 102, 108, 109, 110, 117, 119, 120, 137 # Mandatory P624 = 100 # Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0. # Number: 0, 1 # Mandatory P2625 = 0 # Conference URI # String P2618 = # Broadsoft # Broadsoft Call Center. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2641 = 0 # Hoteling Event. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2642 = 0 # Call Center Status. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2643 = 0 # Broadsoft Executive Assistant. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2664 = 0 # Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2688 = 0 ############################################################### # Account 4/Advanced Settings/BLF(Busy Lamp Field) 2604 only ############################################################### # Presence Eventlist URI # String P26384 = # Eventlist BLF URI # String P644 = # Auto Provision Eventlists. 0 - Disabled, 1 - BLF Eventlist, 2 - Presence Eventlist. Default is 0 # Number:0,1,2 # Mandatory P2689 = 0 # BLF Call-pickup. 0 - Auto, 1 - Force BLF Call-pickup by prefix, 2 - Disabled. Default is 0 # Number: 0, 1, 2 # Mandatory P6755 = 0 # BLF Call-pickup Prefix. Default is ** # String # Mandatory P681 = ** # Call Pickup Barge-In Code # String P26346 = # PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P688 = 0 ############################################################### # Account 4/SCA ############################################################### # Line-Seize Timeout (in seconds). Default is 15 # Number: 15 - 60 # Mandatory P2613 = 15 ############################################################### # Account 4/Call Park ############################################################### # Call Park Feature Code # String P60369 = # Call Park Retrieve Feature Code # String P2636 = ############################################################### # Account 4/Hidden Number Plan ############################################################### # Hidden Number Features # Number: 0,1,2,3. 0-None of Calls, 1-Incoming Calls, 2-Outgoing Calls, 3-Booth Direction Calls. Default is 0. # Mandatory P26343 = 0 # Hidden Number Plan List # String P60358 = { x+(xxxx)xxxx | xx(xx+)xx | x(xx+)x | x(x+) | (x+) } ############################################################### # Account 4/Feature Codes ############################################################### #Enable Local Call Features. 0 - No, 1 - Yes. Default is 1 #Number: 0, 1 #Mandatory P620 = 1 #Do Not Disturb (DND) - On # String P2644 = #Do Not Disturb (DND) - Off # String P2645 = # Call Forward Always - On # String P26313 = # Call Forward Always - Off # String P26314 = # Call Forward Always - Target # String P29392 = #Call Forward Busy - On # String P26309 = #Call Forward Busy - Off # String P26310 = #Call Forward Busy - Target # String P29393 = #Call Forward No Answer - On #String P26311 = #Call Forward No Answer - Off #String P26312 = #Call Forward No Answer - Target #String P29394 = # Call Forward No Answer Timeout (s). Default is 12 # Number: 1 - 120 # Mandatory P670 = 12 #################################################################### # Account 5(GRP2603/2604 only) ## #################################################################### ############################################################### # Account 5/General Settings ############################################################### ############################################################### # Account 5/General Settings/Account Register ############################################################### # Account Active. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P701 = 0 # Account Name # String P717 = # SIP Server # String P702 = # Secondary SIP Server # String P2712 = # Outbound Proxy # String P703 = # Backup Outbound Proxy # String P2733 = # SIP User ID # String P704 = # SIP Authentication ID # String P705 = # SIP Authentication Password # String P706 = # Name # String P707 = # TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 # Number: 0, 1, 2 # Mandatory P709 = 0 # Voicemail Access Number # String P726 = # BLF Server # String P2775 = # Account Display # Number: 0, 1. 0 - User Name, 1 - User ID. Default is 0 # Mandatory P2780 = 0 # UCM User Password # String P60461 = ############################################################### # Account 5/General Settings/Network Settings ############################################################### # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P708 = 0 # NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 4. # Number: 0, 1, 2, 3, 4, 5 # Mandatory P714 = 4 # Support Rport (RFC3581). 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P747 = 1 # Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters # String P718 = # Use SBC. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26490 = 0 # Maximum Number of SIP Request Retries # Number: 1 - 10 # Mandatory P60455 = 4 # DNS SRV Failover Mode. 0 - Default, 1 - Saved one until DNS TTL, 2 - Saved one until no response. Default is 0 # Number: 0,1,2 # Mandatory P26440 = 0 # Register Before DNS SRV Fail-over. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P29495 = 0 # Failback Expiration (m) # Number P60456 = 60 # DNS Mode--Use Configured IP # Primary IP. Maximum 15 characters # String P2708 = # Backup IP 1 # String P2709 = # Backup IP 2 # String P2710 = ############################################################### # Account 5/SIP Settings ############################################################### ############################################################### # Account 5/SIP Settings/Basic Settings ############################################################### # SIP Registration. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P710 = 1 # Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0 # Number: 0, 1, 2 # Mandatory P711 = 0 # Register Expiration (in minutes). Default is 60. Max about 45 days # Number: 1 - 64800 # Mandatory P712 = 60 # Subscribe Expiration (in minutes). Default is 60. Max about 45 days # Number: 1 - 64800 # Mandatory P26451 = 60 # Reregister Before Expiration (in seconds). Default is 0 seconds # Number: 0 - 64800 # Mandatory P2730 = 0 # SIP Registration Failure Retry Wait Time (in seconds). Default is 20 # Number: 1 - 3600 # Mandatory P771 = 20 # Add Auth Header On Initial REGISTER. Default is 0 # Number: 0, 1 # Mandatory P2759 = 0 # Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0 # Number: 0,1 # Mandatory P2797 = 0 # OPTIONS Keep Alive Interval. Default is 30 # Number # Mandatory P2798 = 30 # OPTIONS Keep Alive Max Lost. Default is 3 # Number # Mandatory P2799 = 3 # SUBSCRIBE for MWI. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P715 = 0 # SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2719 = 0 # Use Privacy Header # 0 - Default, 1 - No, 2 - Yes. Default is 0 # Number: 0, 1, 2 # Mandatory P2738 = 0 # Use P-Preferred-Identity Header # 0 - Default, 1 - No, 2 - Yes. Default is 0 # Number: 0, 1, 2 # Mandatory P2739 = 0 # Use X-Grandstream-PBX Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26454 = 1 # Use P-Access-Network-Info Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26458 = 1 # Use P-Emergency-Info Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26459 = 1 # Use P-Asserted-Identity Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P29498 = 0 # Use P-Early-Media Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60472 = 0 # Use Zoom E911 X-switch-info SIP Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60470 = 0 # Use MAC Header # 0 - No, 1 - Only for REGISTER, 2 - Yes to all SIP. Default is 0 # Number: 0, 1, 2 # Mandatory P29490 = 0 # Add MAC in User-Agent # 0 - No, 1 - Yes except REGISTER, 2 - Yes to all SIP. Default is 0 # Number: 0, 1, 2 # Mandatory P26461 = 0 # SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS/TCP. Default is 0 # Number: 0, 1, 2 # Mandatory P748 = 0 # Enable TCP Keep-alive.0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P60465 = 1 # SIP Listening Mode. # 0 - Transport Only, 1 - Dual, 2 - Dual (BLF Enforced), 3 - Dual (Secured). Default is 0 # Number: 0,1,2,3 # Mandatory P26424 = 0 # Local SIP Port. Default is 5068 # Number # Mandatory P713 = 5068 # SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1 # Number: 0, 1 # Mandatory P2729 = 1 # Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2731 = 0 # Support SIP Instance ID. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P789 = 1 # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 50 # Number: 50, 100, 200 # Mandatory P740 = 50 # SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400 # Number: 200, 400, 800 # Mandatory P741 = 400 # Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to # Number: 0, 1, 2 # Mandatory P2705 = 0 # Enable 100rel. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P735 = 0 # Use Route Set in NOTIFY(Follow RFC 6665) # Number: 0, 1 # Mandatory P60459 = 1 ############################################################### # Account 5/SIP Settings/Session Timer ############################################################### # Enable Session Timer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2795 = 0 # Session Expiration (in seconds). Default is 180 # Number: 90 - 64800 # Mandatory P734 = 180 # Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P260 # Number: 90 - 64800 # Mandatory P727 = 90 # Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P728 = 0 # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P729 = 0 # Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P730 = 0 # UAC Specify Refresher. 0 - Omit, 1 - UAC, 2 - UAS. Default is 1 # Number: 0 - 2 # Mandatory P732 = 1 # UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 # Number: 1, 2 # Mandatory P733 = 1 # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE). # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P731 = 0 ############################################################### # Account 5/Codec Settings ############################################################### ############################################################### # Account 5/Codec Settings/Audio ############################################################### # Preferred Vocoder # 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 98 - iLBC, 123 - OPUS, 103 - G.726-16, 104 - G.726.24, 105 - G.726.40 # Number: 0, 2, 4, 8, 9, 18, 98, 123, 103, 104, 105 # choice 1. Default is 9 # Mandatory P751 = 9 # choice 2. Default is 123 # Mandatory P752 = 123 # choice 3. Default is 0 # Mandatory P753 = 0 # choice 4. Default is 8 # Mandatory P754 = 8 # choice 5. Default is 4 # Mandatory P755 = 4 # choice 6. Default is 18 # Mandatory P756 = 18 # choice 7. Default is 98 # Mandatory P757 = 98 # choice 8. Default is 2 # Mandatory P758 = 2 # Codec Negotiation Priority. 0 - Caller, 1 - Callee. Default is 1 # Number: 0, 1 # Mandatory P29461 = 1 # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2748 = 0 # iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 # Number: 0, 1 # Mandatory P795 = 1 # iLBC Payload Type. Default is 97 # Number: 96 - 127 # Mandatory P794 = 97 # G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0 # Number: 0, 1 # Mandatory P2723 = 0 # G.726-32 Dynamic Payload Type. Default is 127 # Number: 96 - 127 # Mandatory P2765 = 127 # OPUS Payload Type. Default is 123 # Number: 96 - 127 # Mandatory P2785 = 123 # Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2701 = 0 # Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P2702 = 1 # Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2703 = 0 # DTMF Payload Type. Default is 101 # Number: 96 - 127 # Mandatory P796 = 101 # Inbound DTMF Volume. Default is 18 # Number： 0 - 32 # Mandatory P60479 = 18 # Enable Audio RED with FEC. Default is 1. # Number: 0, 1 # Mandatory P26473 = 1 # Audio FEC Payload Type. Default is 121. # Number: 96-126 # Mandatory P26474 = 121 # Audio RED Payload Type. Default is 124. # Number: 96-126 # Mandatory P26475 = 124 # Silence Suppression. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P785 = 0 # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 # Number: 0, 1 # Mandatory P798 = 1 # Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms # Default is 2 # Number: 0, 1, 2, 3, 4, 5, 6, 7 # Mandatory P797 = 2 # Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 # Number: 1 - 6 # Mandatory P786 = 2 # G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 # Number: 0, 1 # Mandatory P793 = 1 ############################################################### # Account 5/Codec Settings/RTP Settings ############################################################### # SRTP Mode. 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P743 = 0 # SRTP Key Length. 0 - AES 128&256 bit, 1 - AES 128 bit, 2 - AES 256 bit. Default is 0 # Default is 0 # Number: 0,1 # Mandatory P2783 = 0 # Crypto Life Time # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P2763 = 1 # RTCP Mode # Number: 0, 1, 2, 3. 0 - Default, 1 - Negotiated, 2- RTCP Mux, 3 - RTCP Mux Only. Default is 0 # Mandatory P60460 = 0 # RTCP Keep-Alive method # Number: 1, 2. 1 - Receiver Report, 2 - Sender Report. Default is 1. # Mandatory P60466 = 1 # RTP Keep-Alive method # Number: 0, 1. 0 - No, 1 - RTP Version 1. Default is 1. # Mandatory P60467 = 1 # VQ RTCP-XR # VQ RTCP-XR Collector Name. # String P26493 = # VQ RTCP-XR Collector Address. # String P26494 = # VQ RTCP-XR Collector Port # String P26495 = 5060 # Symmetric RTP. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P760 = 0 # RTP Timeout (s). Default is 30. # Number: 0, 6 - 600. # Mandatory P29468 = 0 ############################################################### # Account 5/Call Settings ############################################################### ############################################################### # Account 5/Call Settings/Call Features ############################################################### # Auto Answer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P725 = 0 # Auto Answer Numbers. Up to 10 numbers. Each number is seperated by a semi-colon # String P29464 = # Play warning tone for Auto Answer Intercom. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26472 = 1 # Custom Alert-Info for Auto Answer. # String P2756 = # Allow Auto Answer by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P738 = 1 # Allow Barging by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26419 = 0 # Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P721 = 0 # Intercept Anonymous Calls. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P746 = 0 # Call Log. 0 - Log All Calls, 1 - Log Incoming/Outgoing only (missed calls NOT recorded), 2 - Disable Call Log. Default is 0 # Number: 0, 1, 2 # Mandatory P742 = 0 # Mute on Intercom Auto Answer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26471 = 0 # Transfer on Conference Hangup. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2704 = 0 # Transfer to VM feature code # Strings. Default is * P60492 = * # Key as Send. 0 - Disabled, 1 - Pound (#), 2 - Star (*). Default is 1 # Number: 0, 1, 2 # Mandatory P792 = 1 # Record Key Default Function. 0 - Record On, 1 - Record Off P29466 = 0 # Call Recording On # String P26428 = # Call Recording Off # String P26429 = # Enable Recovery on Blind Transfer. 0 - Yes, 1 - No. Default is 0 # Number: 0, 1 # Mandatory P2784 = 0 # Blind Transfer Wait Timeout. Default is 30 # Number: 30 - 300 # Mandatory P26470 = 30 # No Key Entry Timeout (in seconds). Default is 4 # Number: 1 - 15 # Mandatory P791 = 4 # Ring Timeout (in seconds). Default is 60 # Number: 30 - 3600 # Mandatory P776 = 60 # Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P769 = 0 # RFC2543 Hold. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26462= 0 # Enable Call Waiting. 0 - Default, 1 - Yes, 2 - No. Default is 0 # Number: 0, 1, 2 # Mandatory P26463 = 0 # Enable Override Forward. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60462 = 0 # Override Forward Numbers # Strings P60463 = ############################################################### # Account 5/Call Settings/Dial Plan ############################################################### # Dial Plan Prefix # String P719 = # Bypass Dial Plan # String: contact,incoming,outgoing,dialing,mpk,api P2782 = mpk # Dial Plan. Default is { x+ | \+x+ | *x+ | *xx*x+ } # String # Mandatory P759= { x+ | \+x+ | *x+ | *xx*x+ } ############################################################### # Account 5/Call Settings/Call Display ############################################################### # Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 2 # Number: 0, 1, 2 # Mandatory P2724 = 2 # Callee ID Display. 0 - Auto, 1 - Disabled, 2 - To Header. Default is 0 # Number: 0, 1, 2 # Mandatory P26425 = 0 ############################################################### # Account 5/Call Settings/Ringtone ############################################################### # Ringback Tone at No Early Media # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60473 = 0 # Account Ring Tone. # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P723 = 0 # Matching Incoming Caller ID. Matching Rule 1 # String P1512 = # Matching Rule 1 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1513 = 0 # Matching Incoming Caller ID. Matching Rule 2 # String P1514 = # Matching Rule 2 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1515 = 0 # Matching Incoming Caller ID. Matching Rule 3 # String P1516 = # Matching Rule 3 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1517 = 0 # Matching Incoming Caller ID. Matching Rule 4 # String P6740 = # Matching Rule 4 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6741 = 0 # Matching Incoming Caller ID. Matching Rule 5 # String P6742 = # Matching Rule 5 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6743 = 0 # Matching Incoming Caller ID. Matching Rule 6 # String P6744 = # Matching Rule 6 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6745 = 0 # Matching Incoming Caller ID. Matching Rule 7 # String P26464 = # Matching Rule 7 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26465 = 0 # Matching Incoming Caller ID. Matching Rule 8 # String P26466 = # Matching Rule 8 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26467 = 0 # Matching Incoming Caller ID. Matching Rule 9 # String P26468 = # Matching Rule 9 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26469 = 0 # Matching Incoming Caller ID. Matching Rule 10 # String P26496 = # Matching Rule 10 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26497 = 0 ############################################################### # Account 5/Advanced Settings ############################################################### ############################################################### # Account 5/Advanced Settings/Security Settings ############################################################### # Check Domain Certificates. When set to Yes/Enabled, domain certificate will be checked as defined in RFC5922 # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2711 = 0 # Trusted Domain Name List # String P60482 = # Validate Certification Chain. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2767 = 0 # Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2706 = 0 # Omit charset=UTF-8 in MESSAGE. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2755 = 0 # Allow Unsolicited REFER. 0 - Disabled, 1 - Enabled, 2 - Enabled/Force Auth. Default is 0 # Number: 0, 1, 2 # Mandatory P26423 = 0 # Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2747 = 0 # Check SIP User ID for Incoming INVITE. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P749 = 0 # Allow SIP Reset # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26415 = 0 # Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2746 = 0 ############################################################### # Account 5/Advanced Settings/MOH ############################################################### # On Hold Reminder Tone. 0 - Disabled, 1 - Enable. Default is 1 # Number: 0, 1 # Mandatory P26406 = 1 # Music On Hold URI # String P2750 = ############################################################### # Account 5/Advanced Settings/Advanced Features ############################################################### # Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, # 109 - RNK, 110 - Sylantro, 117 - Huawei IMS, 119 - Phonepower, 120 - UCM Call Center, 137 - Zoom # Default is 100 # Number: 100, 101, 102, 108, 109, 110, 117, 119, 120, 137 # Mandatory P724 = 100 # Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0. # Number: 0, 1 # Mandatory P2725 = 0 # Conference URI # String P2718 = # Broadsoft # Broadsoft Call Center. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2741 = 0 # Hoteling Event. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2742 = 0 # Call Center Status. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2743 = 0 # Broadsoft Executive Assistant. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2764 = 0 # Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2788 = 0 ############################################################### # Account 5/Advanced Settings/BLF(Busy Lamp Field) 2604 only ############################################################### # Presence Eventlist URI # String P26484 = # Eventlist BLF URI # String P744 = # Auto Provision Eventlists. 0 - Disabled, 1 - BLF Eventlist, 2 - Presence Eventlist. Default is 0 # Number:0,1,2 # Mandatory P2789 = 0 # BLF Call-pickup. 0 - Auto, 1 - Force BLF Call-pickup by prefix, 2 - Disabled. Default is 0 # Number: 0, 1, 2 # Mandatory P6756 = 0 # BLF Call-pickup Prefix. Default is ** # String # Mandatory P781 = ** # Call Pickup Barge-In Code # String P26446 = # PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P788 = 0 ############################################################### # Account 5/SCA ############################################################### # Line-Seize Timeout (in seconds). Default is 15 # Number: 15 - 60 # Mandatory P2713 = 15 ############################################################### # Account 5/Call Park ############################################################### # Call Park Feature Code # String P60469 = # Call Park Retrieve Feature Code # String P2736 = ############################################################### # Account 5/Hidden Number Plan ############################################################### # Hidden Number Features # Number: 0,1,2,3. 0-None of Calls, 1-Incoming Calls, 2-Outgoing Calls, 3-Booth Direction Calls. Default is 0. # Mandatory P26443 = 0 # Hidden Number Plan List # String P60458 = { x+(xxxx)xxxx | xx(xx+)xx | x(xx+)x | x(x+) | (x+) } ############################################################### # Account 5/Feature Codes ############################################################### #Enable Local Call Features. 0 - No, 1 - Yes. Default is 1 #Number: 0, 1 #Mandatory P720 = 1 #Do Not Disturb (DND) - On # String P2744 = #Do Not Disturb (DND) - Off # String P2745 = # Call Forward Always - On # String P26413 = # Call Forward Always - Off # String P26414 = # Call Forward Always - Target # String P29492 = #Call Forward Busy - On # String P26409 = #Call Forward Busy - Off # String P26410 = #Call Forward Busy - Target # String P29493 = #Call Forward No Answer - On #String P26411 = #Call Forward No Answer - Off #String P26412 = #Call Forward No Answer - Target #String P29494 = # Call Forward No Answer Timeout (s). Default is 12 # Number: 1 - 120 # Mandatory P770 = 12 #################################################################### # Account 6(GRP2603/2604 only) ## #################################################################### ############################################################### # Account 6/General Settings ############################################################### ############################################################### # Account 6/General Settings/Account Register ############################################################### # Account Active. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P801 = 0 # Account Name # String P817 = # SIP Server # String P802 = # Secondary SIP Server # String P2812 = # Outbound Proxy # String P803 = # Backup Outbound Proxy # String P2833 = # SIP User ID # String P804 = # SIP Authentication ID # String P805 = # SIP Authentication Password # String P806 = # Name # String P807 = # TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0 # Number: 0, 1, 2 # Mandatory P809 = 0 # Voicemail Access Number # String P826 = # BLF Server # String P2875 = # Account Display # Number: 0, 1. 0 - User Name, 1 - User ID. Default is 0 # Mandatory P2880 = 0 # UCM User Password # String P60561 = ############################################################### # Account 6/General Settings/Network Settings ############################################################### # DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P808 = 0 # NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 4. # Number: 0, 1, 2, 3, 4, 5 # Mandatory P814 = 4 # Support Rport (RFC3581). 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P847 = 1 # Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters # String P818 = # Use SBC. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26590 = 0 # Maximum Number of SIP Request Retries # Number: 1 - 10 # Mandatory P60555 = 4 # DNS SRV Failover Mode. 0 - Default, 1 - Saved one until DNS TTL, 2 - Saved one until no response. Default is 0 # Number: 0,1,2 # Mandatory P26540 = 0 # Register Before DNS SRV Fail-over. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P29595 = 0 # Failback Expiration (m) # Number P60556 = 60 # DNS Mode--Use Configured IP # Primary IP. Maximum 15 characters # String P2808 = # Backup IP 1 # String P2809 = # Backup IP 2 # String P2810 = ############################################################### # Account 6/SIP Settings ############################################################### ############################################################### # Account 6/SIP Settings/Basic Settings ############################################################### # SIP Registration. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P810 = 1 # Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0 # Number: 0, 1, 2 # Mandatory P811 = 0 # Register Expiration (in minutes). Default is 60. Max about 45 days # Number: 1 - 64800 # Mandatory P812 = 60 # Subscribe Expiration (in minutes). Default is 60. Max about 45 days # Number: 1 - 64800 # Mandatory P26551 = 60 # Reregister Before Expiration (in seconds). Default is 0 seconds # Number: 0 - 64800 # Mandatory P2830 = 0 # SIP Registration Failure Retry Wait Time (in seconds). Default is 20 # Number: 1 - 3600 # Mandatory P871 = 20 # Add Auth Header On Initial REGISTER. Default is 0 # Number: 0, 1 # Mandatory P2859 = 0 # Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0 # Number: 0,1 # Mandatory P2897 = 0 # OPTIONS Keep Alive Interval. Default is 30 # Number # Mandatory P2898 = 30 # OPTIONS Keep Alive Max Lost. Default is 3 # Number # Mandatory P2899 = 3 # SUBSCRIBE for MWI. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P815 = 0 # SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2819 = 0 # Use Privacy Header # 0 - Default, 1 - No, 2 - Yes. Default is 0 # Number: 0, 1, 2 # Mandatory P2838 = 0 # Use P-Preferred-Identity Header # 0 - Default, 1 - No, 2 - Yes. Default is 0 # Number: 0, 1, 2 # Mandatory P2839 = 0 # Use X-Grandstream-PBX Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26554 = 1 # Use P-Access-Network-Info Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26558 = 1 # Use P-Emergency-Info Header # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26559 = 1 # Use P-Asserted-Identity Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P29598 = 0 # Use P-Early-Media Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60572 = 0 # Use Zoom E911 X-switch-info SIP Header # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60570 = 0 # Use MAC Header # 0 - No, 1 - Only for REGISTER, 2 - Yes to all SIP. Default is 0 # Number: 0, 1, 2 # Mandatory P29590 = 0 # Add MAC in User-Agent # 0 - No, 1 - Yes except REGISTER, 2 - Yes to all SIP. Default is 0 # Number: 0, 1, 2 # Mandatory P26561 = 0 # SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS/TCP. Default is 0 # Number: 0, 1, 2 # Mandatory P848 = 0 # Enable TCP Keep-alive.0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P60565 = 1 # SIP Listening Mode. # 0 - Transport Only, 1 - Dual, 2 - Dual (BLF Enforced), 3 - Dual (Secured). Default is 0 # Number: 0,1,2,3 # Mandatory P26524 = 0 # Local SIP Port. Default is 5070 # Number # Mandatory P813 = 5070 # SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1 # Number: 0, 1 # Mandatory P2829 = 1 # Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2831 = 0 # Support SIP Instance ID. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P889 = 1 # SIP T1 Timeout. RFC 3261 T1 value (RTT estimate) # 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 50 # Number: 50, 100, 200 # Mandatory P840 = 50 # SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses # 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400 # Number: 200, 400, 800 # Mandatory P841 = 400 # Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to # Number: 0, 1, 2 # Mandatory P2805 = 0 # Enable 100rel. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P835 = 0 # Use Route Set in NOTIFY(Follow RFC 6665) # Number: 0, 1 # Mandatory P60559 = 1 ############################################################### # Account 6/SIP Settings/Session Timer ############################################################### # Enable Session Timer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2895 = 0 # Session Expiration (in seconds). Default is 180 # Number: 90 - 64800 # Mandatory P834 = 180 # Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P260 # Number: 90 - 64800 # Mandatory P827 = 90 # Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P828 = 0 # Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P829 = 0 # Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P830 = 0 # UAC Specify Refresher. 0 - Omit, 1 - UAC, 2 - UAS. Default is 1 # Number: 0 - 2 # Mandatory P832 = 1 # UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1 # Number: 1, 2 # Mandatory P833 = 1 # Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE). # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P831 = 0 ############################################################### # Account 6/Codec Settings ############################################################### ############################################################### # Account 6/Codec Settings/Audio ############################################################### # Preferred Vocoder # 0 - PCMU, 2 - G.726-32, 4 - G.723.1, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 98 - iLBC, 123 - OPUS, 103 - G.726-16, 104 - G.726.24, 105 - G.726.40 # Number: 0, 2, 4, 8, 9, 18, 98, 123, 103, 104, 105 # choice 1. Default is 9 # Mandatory P851 = 9 # choice 2. Default is 123 # Mandatory P852 = 123 # choice 3. Default is 0 # Mandatory P853 = 0 # choice 4. Default is 8 # Mandatory P854 = 8 # choice 5. Default is 4 # Mandatory P855 = 4 # choice 6. Default is 18 # Mandatory P856 = 18 # choice 7. Default is 98 # Mandatory P857 = 98 # choice 8. Default is 2 # Mandatory P858 = 2 # Codec Negotiation Priority. 0 - Caller, 1 - Callee. Default is 1 # Number: 0, 1 # Mandatory P29561 = 1 # Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2848 = 0 # iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1 # Number: 0, 1 # Mandatory P895 = 1 # iLBC Payload Type. Default is 97 # Number: 96 - 127 # Mandatory P894 = 97 # G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0 # Number: 0, 1 # Mandatory P2823 = 0 # G.726-32 Dynamic Payload Type. Default is 127 # Number: 96 - 127 # Mandatory P2865 = 127 # OPUS Payload Type. Default is 123 # Number: 96 - 127 # Mandatory P2885 = 123 # Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2801 = 0 # Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P2802 = 1 # Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2803 = 0 # DTMF Payload Type. Default is 101 # Number: 96 - 127 # Mandatory P896 = 101 # Inbound DTMF Volume. Default is 18 # Number： 0 - 32 # Mandatory P60579 = 18 # Enable Audio RED with FEC. Default is 1. # Number: 0, 1 # Mandatory P26573 = 1 # Audio FEC Payload Type. Default is 121. # Number: 96-126 # Mandatory P26574 = 121 # Audio RED Payload Type. Default is 124. # Number: 96-126 # Mandatory P26575 = 124 # Silence Suppression. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P885 = 0 # Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1 # Number: 0, 1 # Mandatory P898 = 1 # Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms # Default is 2 # Number: 0, 1, 2, 3, 4, 5, 6, 7 # Mandatory P897 = 2 # Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2 # Number: 1 - 6 # Mandatory P886 = 2 # G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1 # Number: 0, 1 # Mandatory P893 = 1 ############################################################### # Account 6/Codec Settings/RTP Settings ############################################################### # SRTP Mode. 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P843 = 0 # SRTP Key Length. 0 - AES 128&256 bit, 1 - AES 128 bit, 2 - AES 256 bit. Default is 0 # Default is 0 # Number: 0,1 # Mandatory P2883 = 0 # Crypto Life Time # 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P2863 = 1 # RTCP Mode # Number: 0, 1, 2, 3. 0 - Default, 1 - Negotiated, 2- RTCP Mux, 3 - RTCP Mux Only. Default is 0 # Mandatory P60560 = 0 # RTCP Keep-Alive method # Number: 1, 2. 1 - Receiver Report, 2 - Sender Report. Default is 1. # Mandatory P60566 = 1 # RTP Keep-Alive method # Number: 0, 1. 0 - No, 1 - RTP Version 1. Default is 1. # Mandatory P60567 = 1 # VQ RTCP-XR # VQ RTCP-XR Collector Name. # String P26593 = # VQ RTCP-XR Collector Address. # String P26594 = # VQ RTCP-XR Collector Port # String P26595 = 5060 # Symmetric RTP. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P860 = 0 # RTP Timeout (s). Default is 30. # Number: 0, 6 - 600. # Mandatory P29568 = 0 ############################################################### # Account 6/Call Settings ############################################################### ############################################################### # Account 6/Call Settings/Call Features ############################################################### # Auto Answer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P825 = 0 # Auto Answer Numbers. Up to 10 numbers. Each number is seperated by a semi-colon # String P29564 = # Play warning tone for Auto Answer Intercom. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P26572 = 1 # Custom Alert-Info for Auto Answer. # String P2856 = # Allow Auto Answer by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P838 = 1 # Allow Barging by Call-Info/Alert-Info. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26519 = 0 # Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P821 = 0 # Intercept Anonymous Calls. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P846 = 0 # Call Log. 0 - Log All Calls, 1 - Log Incoming/Outgoing only (missed calls NOT recorded), 2 - Disable Call Log. Default is 0 # Number: 0, 1, 2 # Mandatory P842 = 0 # Mute on Intercom Auto Answer. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26571 = 0 # Transfer on Conference Hangup. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2804 = 0 # Transfer to VM feature code # Strings. Default is * P60592 = * # Key as Send. 0 - Disabled, 1 - Pound (#), 2 - Star (*). Default is 1 # Number: 0, 1, 2 # Mandatory P892 = 1 # Record Key Default Function. 0 - Record On, 1 - Record Off P29566 = 0 # Call Recording On # String P26528 = # Call Recording Off # String P26529 = # Enable Recovery on Blind Transfer. 0 - Yes, 1 - No. Default is 0 # Number: 0, 1 # Mandatory P2884 = 0 # Blind Transfer Wait Timeout. Default is 30 # Number: 30 - 300 # Mandatory P26570 = 30 # No Key Entry Timeout (in seconds). Default is 4 # Number: 1 - 15 # Mandatory P891 = 4 # Ring Timeout (in seconds). Default is 60 # Number: 30 - 3600 # Mandatory P876 = 60 # Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P869 = 0 # RFC2543 Hold. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26562= 0 # Enable Call Waiting. 0 - Default, 1 - Yes, 2 - No. Default is 0 # Number: 0, 1, 2 # Mandatory P26563 = 0 # Enable Override Forward. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60562 = 0 # Override Forward Numbers # Strings P60563 = ############################################################### # Account 6/Call Settings/Dial Plan ############################################################### # Dial Plan Prefix # String P819 = # Bypass Dial Plan # String: contact,incoming,outgoing,dialing,mpk,api P2882 = mpk # Dial Plan. Default is { x+ | \+x+ | *x+ | *xx*x+ } # String # Mandatory P859= { x+ | \+x+ | *x+ | *xx*x+ } ############################################################### # Account 6/Call Settings/Call Display ############################################################### # Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 2 # Number: 0, 1, 2 # Mandatory P2824 = 2 # Callee ID Display. 0 - Auto, 1 - Disabled, 2 - To Header. Default is 0 # Number: 0, 1, 2 # Mandatory P26525 = 0 ############################################################### # Account 6/Call Settings/Ringtone ############################################################### # Ringback Tone at No Early Media # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P60573 = 0 # Account Ring Tone. # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P823 = 0 # Matching Incoming Caller ID. Matching Rule 1 # String P1518 = # Matching Rule 1 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1519 = 0 # Matching Incoming Caller ID. Matching Rule 2 # String P1520 = # Matching Rule 2 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1521 = 0 # Matching Incoming Caller ID. Matching Rule 3 # String P1522 = # Matching Rule 3 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P1523 = 0 # Matching Incoming Caller ID. Matching Rule 4 # String P6746 = # Matching Rule 4 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6747 = 0 # Matching Incoming Caller ID. Matching Rule 5 # String P6748 = # Matching Rule 5 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6749 = 0 # Matching Incoming Caller ID. Matching Rule 6 # String P6750 = # Matching Rule 6 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P6751 = 0 # Matching Incoming Caller ID. Matching Rule 7 # String P26564 = # Matching Rule 7 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26565 = 0 # Matching Incoming Caller ID. Matching Rule 8 # String P26566 = # Matching Rule 8 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26567 = 0 # Matching Incoming Caller ID. Matching Rule 9 # String P26568 = # Matching Rule 9 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26569 = 0 # Matching Incoming Caller ID. Matching Rule 10 # String P26596 = # Matching Rule 10 Distinctive Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone # Mandatory P26597 = 0 ############################################################### # Account 6/Advanced Settings ############################################################### ############################################################### # Account 6/Advanced Settings/Security Settings ############################################################### # Check Domain Certificates. When set to Yes/Enabled, domain certificate will be checked as defined in RFC5922 # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2811 = 0 # Trusted Domain Name List # String P60582 = # Validate Certification Chain. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2867 = 0 # Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2806 = 0 # Omit charset=UTF-8 in MESSAGE. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2855 = 0 # Allow Unsolicited REFER. 0 - Disabled, 1 - Enabled, 2 - Enabled/Force Auth. Default is 0 # Number: 0, 1, 2 # Mandatory P26523 = 0 # Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2847 = 0 # Check SIP User ID for Incoming INVITE. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P849 = 0 # Allow SIP Reset # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26515 = 0 # Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P2846 = 0 ############################################################### # Account 6/Advanced Settings/MOH ############################################################### # On Hold Reminder Tone. 0 - Disabled, 1 - Enable. Default is 1 # Number: 0, 1 # Mandatory P26506 = 1 # Music On Hold URI # String P2850 = ############################################################### # Account 6/Advanced Settings/Advanced Features ############################################################### # Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, # 109 - RNK, 110 - Sylantro, 117 - Huawei IMS, 119 - Phonepower, 120 - UCM Call Center, 137 - Zoom # Default is 100 # Number: 100, 101, 102, 108, 109, 110, 117, 119, 120, 137 # Mandatory P824 = 100 # Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0. # Number: 0, 1 # Mandatory P2825 = 0 # Conference URI # String P2818 = # Broadsoft # Broadsoft Call Center. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2841 = 0 # Hoteling Event. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2842 = 0 # Call Center Status. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2843 = 0 # Broadsoft Executive Assistant. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2864 = 0 # Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P2888 = 0 ############################################################### # Account 6/Advanced Settings/BLF(Busy Lamp Field) 2604 only ############################################################### # Presence Eventlist URI # String P26584 = # Eventlist BLF URI # String P844 = # Auto Provision Eventlists. 0 - Disabled, 1 - BLF Eventlist, 2 - Presence Eventlist. Default is 0 # Number:0,1,2 # Mandatory P2889 = 0 # BLF Call-pickup. 0 - Auto, 1 - Force BLF Call-pickup by prefix, 2 - Disabled. Default is 0 # Number: 0, 1, 2 # Mandatory P6757 = 0 # BLF Call-pickup Prefix. Default is ** # String # Mandatory P881 = ** # Call Pickup Barge-In Code # String P26546 = # PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P888 = 0 ############################################################### # Account 6/SCA ############################################################### # Line-Seize Timeout (in seconds). Default is 15 # Number: 15 - 60 # Mandatory P2813 = 15 ############################################################### # Account 6/Call Park ############################################################### # Call Park Feature Code # String P60569 = # Call Park Retrieve Feature Code # String P2836 = ############################################################### # Account 6/Hidden Number Plan ############################################################### # Hidden Number Features # Number: 0,1,2,3. 0-None of Calls, 1-Incoming Calls, 2-Outgoing Calls, 3-Booth Direction Calls. Default is 0. # Mandatory P26543 = 0 # Hidden Number Plan List # String P60558 = { x+(xxxx)xxxx | xx(xx+)xx | x(xx+)x | x(x+) | (x+) } ############################################################### # Account 6/Feature Codes ############################################################### #Enable Local Call Features. 0 - No, 1 - Yes. Default is 1 #Number: 0, 1 #Mandatory P820 = 1 #Do Not Disturb (DND) - On # String P2844 = #Do Not Disturb (DND) - Off # String P2845 = # Call Forward Always - On # String P26513 = # Call Forward Always - Off # String P26514 = # Call Forward Always - Target # String P29592 = #Call Forward Busy - On # String P26509 = #Call Forward Busy - Off # String P26510 = #Call Forward Busy - Target # String P29593 = #Call Forward No Answer - On #String P26511 = #Call Forward No Answer - Off #String P26512 = #Call Forward No Answer - Target #String P29594 = # Call Forward No Answer Timeout (s). Default is 12 # Number: 1 - 120 # Mandatory P870 = 12 #################################################################### # Phone Settings ## #################################################################### #################################################################### # General Settings ## #################################################################### #################################################################### # General Settings/Basic Settings #################################################################### # Local RTP Port. Default is 5004 # Number: 1024 - 65400. Must be even number # Mandatory P39 = 5004 # Local RTP Port Range. Default is 200 # Number: 48 - 10000 # Mandatory P29610 = 200 # Use Random Port. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P78 = 1 # Keep-Alive Interval (in seconds). Default is 20 # Number: 10 - 160 # Mandatory P84 = 20 # STUN server # String P76 = # Use NAT IP. This will enable our SIP client to use this IP in the SIP/SDP message. Example 64.3.153.50 # String: a-z, A-Z, 0-9, ".", ":" P101 = # Delay Registration. Default is 0. # Number: 0 - 90 # Mandatory P8359 = 0 # Enable Outbound Notification. Default is 1. # Number: 0, 1. 0 - No, 1 - Yes. P32062 = 1 # Clean User Data While Different Users Log In. Default is 0 # Number: 0, 1. 0 - No, 1 - Yes. P8628 = 0 #################################################################### # General Settings/Public Mode #################################################################### # Enable Public Mode. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P1345 = 0 # Public Mode Username Prefix # String P8470 = # Public Mode Username Suffix # String P8471 = # Allow Multiple Accounts. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P8564 = 0 # Enable Remote Synchronization. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P8448 = 0 # Server Type. 0 - TFTP, 1 - FTP, 2 - HTTP. Default is 0 # Number: 0, 1, 2 # Mandatory P8449 = 0 # Server Path # String P8450 = # FTP/HTTP Username # String P8451 = # FTP/HTTP Password # String P8452= # Public Mode Timeout # Number: 0, 10 - 1440. Default is 10 # Mandatory P2915 = 10 #################################################################### # Call Settings #################################################################### # General # Key Mode. 1 - Line Mode, 2 - Account Mode. Default is 1 # Number: 1, 2 # Mandatory P8369 = 1 # Preferred Default Account. # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6. # Number: 0 - 5. Default is 0. # Mandatory P29612 = 0 # Mute Key Functions While Idle. 0 - DND, 1 - Idle Mute, 2 - Disabled. Default is 0 # Number: 0,1,2 # Mandatory P1565 = 0 # Last Call Forward Always. 0 - No, 1 - Yes. Default is 0 # Number: 0,1,2 # Mandatory P32063 = 0 # Show SIP Error Response. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P8376 = 1 # Do not Escape '#' as 23% in SIP URL. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P1406 = 0 # User-Agent Prefix # String P8358 = # Enable Hook Switch. 0 - Yes, 1 - No, 2 - No, Except Answering Call. Default is 0. # Number: 0, 1, 2 P6763 = 0 # Enable Speaker Key. 0 - Yes, 1 - No, 2 - For Switching Channels. Default is 0. # Number: 0, 1, 2 P22410 = 0 # In-call Contact Info Display # String P22471 = # Contact Source Priority # String P22439 = Local,Remote,BSXSI,LDAPPhonebook,NETWorkSignaling # Outgoing # Click-To-Dial Feature. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P1561 = 0 # Enable Direct IP Call. 0 - Yes, 1 - No. Default is 0 # Number: 0, 1 # Mandatory P1310 = 0 # Use Quick IP Call Mode. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P184 = 0 # Enable Paging Call Mode. 0 - Yes, 1 - No. Default is 0 # Number: 0, 1 # Mandatory P22278 = 0 # Predictive Dialing Feature. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P22126 = 1 # Predictive Dialing Source. # String P8442 = LocalPhonebook,CallHistory,BSPhonebook,BSCallHistory,LDAPPhonebook,PersonalPhonebook,RemotePhonebook,FeatureCode # Enable Local Dialing DTMF Tone in Speaker Mode. 0 - No, 1 - Yes, 2 - Specific Tone. Default is 1 # Number: 0, 1, 2 # Mandatory P22553 = 1 # Onhook Dial Barging. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P8397 = 1 # Off-hook Auto Dial # String P71 = # Off-hook Auto Dial Delay # Number: 0 - 10 P8388 = 4 # Off-hook/On-hook Timeout (in seconds). Default is 30 # Number: 10 - 60 # Mandatory P1485 = 30 # Enable Live keyPad. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P8350 = 0 # Live Keypad Expiration. Default is 5 # Number: 2 - 15. # Mandatory P8351 = 5 # Enable Auto Redial. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P8353 = 0 # Auto Redial Times. # Number: 1 - 200. Default is 10. # Mandatory P8354 = 10 # Auto Redial Interval # Number: 1 - 360. Default is 10. # Mandatory P8355 = 10 # Bypass Dial Plan Through Call History and Directories. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P6758 = 0 # Enable Call Completion Service. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P8391 = 0 # Incoming # Enable Incoming Call Popup. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P8401 = 1 # Enable Missed Call Notification. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P8393 = 1 # Return Code When Refusing Incoming Call. Default is 0 # Number: 0,1,2,3. 0 - Busy(486), 1 - Temporarily Unavailable(480), 2 - Not Found(404), 3 - Decline(603). # Mandatory P8360 = 0 # Allow Incoming Call Before Ringing. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P29609 = 0 # Enable Call Waiting. 0 - Yes, 1 - No. Default is 0 # Number: 0, 1 # Mandatory P91 = 0 # Enable Call Waiting Tone. 0 - Yes, 1 - No. Default is 0 # Number: 0, 1 # Mandatory P186 = 0 # Ring for Call Waiting. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P22102 = 0 # Auto Answer Delay # Number: 0 - 10 # Mandatory P8486 = 0 # In Call # Enable In-call DTMF Display. 0 - Yes, 1 - No. Default is 0 # Number: 0, 1 # Mandatory P338 = 0 # Enable Local In-call DTMF Tone in Speaker Mode. 0 - No, 1 - Yes, 2 - Specific Tone. Default is 1 # Number: 0, 1, 2 # Mandatory P22552 = 1 # GRP2604 Only # Enable Sending DTMF via specific MPKs. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P1339 = 0 # Show on Hold Duration. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P8503 = 1 # Enable Auto Unmute. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P8488 = 1 # In-call Dial Number on Pressing Transfer Key # String P1525 = # Enable Busy Tone on Remote Disconnect. 0 - Yes, 1 - No. Default is 0 # Number: 0, 1 # Mandatory P6762 = 0 # Enable Mute Key In Call. 0 - Yes, 1 - No. Default is 1 # Number: 0, 1 # Mandatory P22441 = 0 # Phonebook Matching # Enable Phonebook Matching Rules # String: dial,query,display P22473 = # Phonebook Matching Rules # String P22472 = # Others # Transfer # Enable Transfer.0 - Yes, 1 - No. Default is 0 # Number: 0, 1 # Mandatory P1341 = 0 # Hold Call Before Completing Transfer. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P8466 = 1 # Attended Transfer Mode. 0 - Static, 1 - Dynamic. Default is 1. # Number: 0, 1 # Mandatory P1376 = 1 # Call Park # Enable Call Park Softkey. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 P8611 = 1 # Call Park Softkey Feature Code # String P8613 = # Call Park Retrieve Softkey Feature Code # String P22559 = # Group Call Park Softkey Feature Code # String P8614 = # DND # Enable DND Feature. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P8446 = 1 # Return Code When Enable DND. Default is 1 # Number: 0,1,2,3. 0 - Busy(486), 1 - Temporarily Unavailable(480), 2 - Not Found(404), 3 - Decline(603). # Mandatory P8361 = 1 # Override DND. 0 - Off, 1 - Allow All, 2 - Allow Only Contacts, 3 - Allow Only Favorite, 4 - Allow Override Numbers # Number: 0,1,2,3,4. Default is 0. # Mandatory P8372 = 0 # Override DND Numbers # String P22450 = # Conference # Enable Conference. 0 - Yes, 1 - No. Default is 0. # Mandatory P1311 = 0 # Hold Call before Adding Conferee. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P22346 = 1 # BLF # Enable BLF Pickup Screen. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P9905 = 0 # Enable BLF Pickup Sound. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P9906 = 0 # Hide BLF Remote Status. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P8374 = 0 # IM # Enable IM Popup. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P8474 = 1 # Instant Message Popup Timeout. # Number: 10 - 900. Default is 10. # Mandatory P26055 = 10 # Play Tone on Receiving IM. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P26056 = 0 # Enable the Indicator in Recording. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P1697 = 1 #################################################################### # Ringtone #################################################################### ### Call Progress Tones ### # Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]]; # (Frequencies are in Hz and cadence on and off are in 10ms) # System Ringtone # String # Mandatory P345 = f1=440,f2=480,c=200/400; # Dial Tone # String # Mandatory P343 = f1=350,f2=440; # Second Dial Tone # String # Mandatory P2909 = f1=350,f2=440; # Message Waiting # String # Mandatory P344 = f1=350,f2=440,c=10/10; # Ring Back Tone # String # Mandatory P346 = f1=440,f2=480,c=200/400; # Call Waiting Tone # String # Mandatory P347 = f1=440,f2=440,c=25/525; # Call-Waiting Tone Gain. 0 - Low, 1 - Medium, 2 - High. Default is 0 # Number: 0, 1, 2 # Mandatory P1555 = 0 # Busy Tone # String # Mandatory P348 = f1=480,f2=620,c=50/50; # Reorder Tone # String # Mandatory P349 = f1=480,f2=620,c=25/25; # Provision # Total Number of Custom Ringtone Update # Number: 0 - 10. Default is 6 P8509 = 6 ############################################################################## ## Multicast Paging ############################################################################## # Multicast Paging Function. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P22208 = 0 # Allowed in DND Mode. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P8381 = 0 # Paging Barge. 0 - Disable, 1 - priority 1, 2 - priority 2, 3 - priority 3, # 4 - priority 4, 5 - priority 5, 6 - priority 6, 7 - priority 7, 8 - priority 8, # 9 - priority 9, 10 - priority 10. Default is 0. # Number: 0 - 10 # Mandatory P1566 = 0 # Paging Priority Active. 0 - Disabled, 1 - Enabled # Number: 0, 1 # Mandatory P1567 = 1 # Multicase Channel Number # Number: 0 - 50 (0 for normal RTP packets, 1-50 for Polycom multicast format packets). Default is 0 P8454 = 0 # Multicast Paging Codec. 18 - G.729A/B, 0 - PCMU, 8 - PCMA, 2 - G.726-32, 9 - G.722, 98 - iLBC, 4- G.723.1 # Number: 18, 0, 8, 2, 9, 98, 4. Default is 9. # Mandatory P1568 = 9 # Multicast Sender ID # String P8455 = # Multicast Call Timeout(s) # Number # Mandatory P22532 = 0 # Multicast Tone. 0 - Disabled, 1 - Enabled # Number: 0, 1 # Mandatory P22556 = 1 ### Multicast Listening ### # Priority 1 # Listening Address # String P1569 = # Label # String P1570 = # Priority 2 # Listening Address # String P1571 = # Label # String P1572 = # Priority 3 # Listening Address # String P1573 = # Label # String P1574 = # Priority 4 # Listening Address # String P1575 = # Label # String P1576 = # Priority 5 # Listening Address # String P1577 = # Label # String P1578 = # Priority 6 # Listening Address # String P1579 = # Label # String P1580 = # Priority 7 # Listening Address # String P1581 = # Label # String P1582 = # Priority 8 # Listening Address # String P1583 = # Label # String P1584 = # Priority 9 # Listening Address # String P1585 = # Label # String P1586 = # Priority 10 # Listening Address # String P1587 = # Label # String P1588 = #################################################################### # Network Settings ## #################################################################### #################################################################### # Ethernet Settings ## #################################################################### # Internet Protocol. 0 - Both, prefer IPv4, 1 - Both, prefer IPv6, 2 - IPv4 Only, 3 - IPv6 Only. Default is 2 # Number: 0, 1, 2, 3 # Mandatory P1415 = 2 #################################################################### # Ethernet Settings/IPv4 Address #################################################################### # IPv4 Address. 0 - DHCP, 1 - Static IP, 2 - PPPoE. Default is 0 # Number: 0, 1, 2 # Mandatory P8 = 0 # Host name, DHCP option 12. Max length allowed is 64 characters # String P146 = # Vendor Class ID, DHCP option 60. Max length allowed is 64 characters # String # For GRP2601, Default value is Grandstream GRP2601. # P148 = Grandstream GRP2601 # For GRP2602, Default value is Grandstream GRP2602. # P148 = Grandstream GRP2602 # For GRP2603, Default value is Grandstream GRP2603. # P148 = Grandstream GRP2603 # For GRP2604, Default value is Grandstream GRP2604. # P148 = Grandstream GRP2604 # DNS 1 Server. Ignore if DHCP or PPPoE is used # Number: 0 - 255 P21 = 0 # Number: 0 - 255 P22 = 0 # Number: 0 - 255 P23 = 0 # Number: 0 - 255 P24 = 0 # DNS 2 Server. Ignore if DHCP or PPPoE is used # Number: 0 - 255 P25 = 0 # Number: 0 - 255 P26 = 0 # Number: 0 - 255 P27 = 0 # Number: 0 - 255 P28 = 0 # Preferred DNS server. (if specified). # Number: 0 - 255 P92 = 0 # Number: 0 - 255 P93 = 0 # Number: 0 - 255 P94 = 0 # Number: 0 - 255 P95 = 0 ########################################## # IPv4 Address - Statically Configured ########################################## # IP Address. Ignore if DHCP or PPPoE is used # Number: 0 - 255 P9 = 192 # Number: 0 - 255 P10 = 168 # Number: 0 - 255 P11 = 0 # Number: 0 - 255 P12 = 160 # Subnet mask. Ignore if DHCP or PPPoE is used # Number: 0 - 255 P13 = 255 # Number: 0 - 255 P14 = 255 # Number: 0 - 255 P15 = 0 # Number: 0 - 255 P16 = 0 # Gateway. Ignore if DHCP or PPPoE is used # Number: 0 - 255 P17 = 0 # Number: 0 - 255 P18 = 0 # Number: 0 - 255 P19 = 0 # Number: 0 - 255 P20 = 0 ########################################## # IPv4 Address - PPPoE ########################################## # PPPoE Account ID # String P82 = # PPPoE Password # String # Cannot contain ` or " P83 = # PPPoE Service Name # String P269 = #################################################################### # Ethernet Settings/IPv6 Address #################################################################### # IPv6 Address. 0 - Auto Configured, 1 - Statically Configured. Default is 0. # Number: 0, 1 # Mandatory P1419 = 0 # IPv6 Static Mode: Statically configured. 0 - Full Static, 1 - Prefix Static. Default is 0. # Number: 0, 1 P1426 = 0 # Full Static: Static IPv6 Address P1420 = # Full Static: IPv6 Prefix Length P1421 = # Prefix Static: IPv6 Prefix (64bits) P1422 = # DNS Server 1 for IPv6 Address # String: a-z, A-Z, 0-9, ".", ":", "[", "]" P1424 = # DNS Server 2 for IPv6 Address # String: a-z, A-Z, 0-9, ".", ":", "[", "]" P1425 = # Preferred DNS Server for IPv6 Address # String: a-z, A-Z, 0-9, ".", ":", "[", "]" P1423 = #################################################################### # Ethernet Settings/802.1X #################################################################### # 802.1X Mode. 0 - Disable, 1 - EAP-MD5. 2 - EAP-TLS, 3 - EAP-PEAPv0/MSCHAPv2. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P7901 = 0 # 802.1X Identity. Max length allowed is 64 characters # String P7902 = # MD5 Password. Max length allowed is 64 characters # String P7903 = # 802.1X CA Certificate # String # P8439 = # 802.1X Client Certificate # String # P8440 = #################################################################### # Network Settings/Wi-Fi Settings (For GRP2602W only) #################################################################### # Wi-Fi Function. 0 - Disable, 1- Enable, 2 - Disable & Hide Menu From LCD # Number: 0, 1, 2. Default is 1 # Mandatory P7800 = 1 # Wi-Fi Band. 0 - 5G & 2.4G, 1 - 2.4G, 2 - 5G. # Number: 0, 1, 2. Default is 0. # Mandatory P25438 = 0 # Country Code (for global version only). Default is US. # String: UNITEDARABEMIRATES (AE), ALBANIA (AL), ARMENIA (AM), NETHERLANDSANTILLES (AN), ARGENTINA (AR), AUSTRALIA (AU), ARUBA (AW), AZERBAIJAN (AZ), BOSNIA (BA), BARBADOS (BB), BANGLADESH (BD), BELGIUM (BE), BULGARIA (BG), BAHRAIN (BH),BURUNDI (BI),BENIN (BJ),BERMUDA (BM),BRUNEI (BN),BOLIVIA (BO),BRAZIL (BR),BAHAMAS (BS),BOTSWANA (BW),BELARUS (BY),BELIZE (BZ),CANADA (CA),CONGO (CF),SWITZERLAND (CH),CHILE (CL),CHINA (CN),COLOMBIA (CO),COSTA (CR),CYPRUS (CY),CZECH (CZ),GERMANY (DE),DENMARK (DK),DOMINICAN (DO),ALGERIA (DZ),ECUADOR (EC),ESTONIA (EE),EGYPT (EG),SPAIN (ES),ETHIOPIA (ET),FINLAND (FI),FIJI (FJ),FRANCE (FR),GERNADA (GD),GEORGIA (GE),GHANA (GH),GIBRALTAR (GI),GREENLAND (GL),GAMBIA (GM),GUINEA (GN),GUADELOUPE (GP),GREECE (GR),GUATEMALA (GT),GUAM (GU),GUYANA (GY),HONGKONG (HK),DONDURAS (HN),CROATIA (HR),HAITI (HT),HUNGARY (HU),INDONESIA (ID),IRELAND (IE),ISRAEL (IL),INDIA (IN),ICELAND (IS),ITALY (IT),JERSEY (JE),JAMAICA (JM),JORDAN (JO),JAPAN (JP),KENYA (KE),KYRGYZSTAN (KG),CAMBODIA (KH),SOUTHKOREA (KR),KUWAIT (KW),CAYMAN (KY),KAZAKHSTAN (KZ),LEBANON (LB),LIECHTENSTEIN (LI),SRILANKA (LK),LIBERIA (LR),LITHUANIA (LT),LUXEMBOURG (LU),LATVIA (LV),MOROCOO (MA),MONACO (MC),MONTENEGRO (ME),MACEDONIA (MK),MALI (ML),MONGOLIA (MN),MACAU (MO),MALT (MT),MEXICO (MX),MALAYSIA (MY),NIGER (NE),NIGERIA (NG),NICARAGUA (NI),NETHERLANDS (NL),NEPAL (NP),NEWZEALNAD (NZ),OMAN (OM),PANAMA (PA),PERU (PE),PAPUA (PG),PHILIPPINES (PH),PAKISTAN (PK),POLAND (PL),PUERTORICO (PR),PORTUGAL (PT),PARAGUAY (PY),QATAR (QA),ROMANIA (RO),SERBIA (RS),RUSSIA (RU),RWANDA (RW),SAUDIARABIA (SA),SWEDEN (SE),SINGAPORE (SG),SLOVAKIA (SI),SLOVENIA (SK),SIERRALEONE (SL),TOGO (TG),THAILAND (TH),TURKMENISTAN (TM),TUNISIA (TN),TURKEY (TR),TRINIDAD (TT),TAIWAN (TW),UKRAINE (UA),UGANDA (UG),UNITEDKINGDOM (UK),UNITEDSTATES (US),URUGUAY (UY),VENEZUELA (VE),VERGINISLANDS (VI),VIETNAM (VN),YEMEN (YE),SOUTHAFRICA (ZA),ZAMBIA (ZM),ZIMBABWE (ZW) # P7831 = US ########################################## # Available Wi-Fi-- Wi-Fi 1 ########################################## # ESSID # String # P83000 = # Security Mode # Number: 0=None, 8=Auto, 1=WEP, 4=WPA, 5=WPA-802.1x, 9=WPA3-SAE, 10=WPA3-802.1x. Default is 0 # Mandatory # P83002 = 0 # Password # String # P83003 = # EAP Method (when security mode set to WPA-802.1x) # Number: 0=PEAP,1=TLS,2=TTLS,3=PWD. Default is 0 # P83004 = 0 # (when EAP Method set to PEAP) # Phase 2 Authentication # Number: 0=None, 1=PAP,2=MSCHAP,3=MSCHAPv2,4=GTC. Default is 0 # P83013 = 0 # CA Certificate # String # P83011 = # Anonymous Identity # String # P83012 = # Identity # String # P83014 = # Identity Password # String # P83015 = # (when EAP Method set to TLS) # TLS CA Certificate # String # P83007 = # TLS Client Certificate # String # P83008 = # TLS Identity # String # P83009 = # TLS Client Certificate Password # String # P83010 = # (when EAP Method set to PWD) # PWD Identity # String # P83005 = # PWD Identity Password # String # P83006 = # IP Mode # Number: 0=Both, prefer IPv4,1=Both, prefer IPv6,2=IPv4 Only,3=IPv6 Only. Default is 0 # P83051 = 0 # IPv4 Mode # Number: 0=DHCP,1=Static. Default is 0 # P83052 = 0 # # IPv6 Mode # Number: 0=Auto-configured,1=Statically configured. Default is 0 # P83077 = 0 ########################################## # IPv4 Statically Configured ########################################## # IPv4 Address. # Number: 0 - 255 # P83053 = # Number: 0 - 255 # P83054 = # Number: 0 - 255 # P83055 = # Number: 0 - 255 # P83056 = # Subnet Mask # Number: 0 - 255 # P83057 = # Number: 0 - 255 # P83058 = # Number: 0 - 255 # P83059 = # Number: 0 - 255 # P83060 = # Gateway # Number: 0 - 255 # P83061 = # Number: 0 - 255 # P83062 = # Number: 0 - 255 # P83063 = # Number: 0 - 255 # P83064 = # DNS Server 1 # Number: 0 - 255 # P83065 = # Number: 0 - 255 # P83066 = # Number: 0 - 255 # P83067 = # Number: 0 - 255 # P83068 = # DNS Server 2 # Number: 0 - 255 # P83069 = # Number: 0 - 255 # P83070 = # Number: 0 - 255 # P83071 = # Number: 0 - 255 # P83072 = # Preferred DNS server # Number: 0 - 255 # P83073 = # Number: 0 - 255 # P83074 = # Number: 0 - 255 # P83075 = # Number: 0 - 255 # P83076 = ########################################## # IPv6 Statically Configured ########################################## # Static Mode. # Number: 0=Full Static,1=Prefix Static. Default is 0 # P83078 = 0 # IPv6 Address # String # P83079 = # IPv6 Prefix length # Number # P83080 = # IPv6 Prefix (64 bits) # String # P83081 = # DNS Server 1 # String # P83082 = # DNS Server 2 # String # P83083 = # Preferred DNS Server # String # P83084 = ########################################## # Available Wi-Fi-- Wi-Fi 2 ########################################## # ESSID # String # P83100 = # Security Mode # Number: 0=None, 8=Auto, 1=WEP, 4=WPA, 5=WPA-802.1x, 9=WPA3-SAE, 10=WPA3-802.1x. Default is 0 # Mandatory # P83102 = 0 # Password # String # P83103 = # EAP Method (when security mode set to WPA-802.1x) # Number: 0=PEAP,1=TLS,2=TTLS,3=PWD. Default is 0 # P83104 = 0 # (when EAP Method set to PEAP) # Phase 2 Authentication # Number: 0=None, 1=PAP,2=MSCHAP,3=MSCHAPv2,4=GTC. Default is 0 # P83113 = 0 # CA Certificate # String # P83111 = # Anonymous Identity # String # P83112 = # Identity # String # P83114 = # Identity Password # String # P83115 = # (when EAP Method set to TLS) # TLS CA Certificate # String # P83107 = # TLS Client Certificate # String # P83108 = # TLS Identity # String # P83109 = # TLS Client Certificate Password # String # P83110 = # (when EAP Method set to PWD) # PWD Identity # String # P83105 = # PWD Identity Password # String # P83106 = # IP Mode # Number: 0=Both, prefer IPv4,1=Both, prefer IPv6,2=IPv4 Only,3=IPv6 Only. Default is 0 # P83151 = 0 # IPv4 Mode # Number: 0=DHCP,1=Static. Default is 0 # P83152 = 0 # # IPv6 Mode # Number: 0=Auto-configured,1=Statically configured. Default is 0 # P83177 = 0 ########################################## # IPv4 Statically Configured ########################################## # IPv4 Address. # Number: 0 - 255 # P83153 = # Number: 0 - 255 # P83154 = # Number: 0 - 255 # P83155 = # Number: 0 - 255 # P83156 = # Subnet Mask # Number: 0 - 255 # P83157 = # Number: 0 - 255 # P83158 = # Number: 0 - 255 # P83159 = # Number: 0 - 255 # P83160 = # Gateway # Number: 0 - 255 # P83161 = # Number: 0 - 255 # P83162 = # Number: 0 - 255 # P83163 = # Number: 0 - 255 # P83164 = # DNS Server 1 # Number: 0 - 255 # P83165 = # Number: 0 - 255 # P83166 = # Number: 0 - 255 # P83167 = # Number: 0 - 255 # P83168 = # DNS Server 2 # Number: 0 - 255 # P83169 = # Number: 0 - 255 # P83170 = # Number: 0 - 255 # P83171 = # Number: 0 - 255 # P83172 = # Preferred DNS server # Number: 0 - 255 # P83173 = # Number: 0 - 255 # P83174 = # Number: 0 - 255 # P83175 = # Number: 0 - 255 # P83176 = ########################################## # IPv6 Statically Configured ########################################## # Static Mode. # Number: 0=Full Static,1=Prefix Static. Default is 0 # P83178 = 0 # IPv6 Address # String # P83179 = # IPv6 Prefix length # Number # P83180 = # IPv6 Prefix (64 bits) # String # P83181 = # DNS Server 1 # String # P83182 = # DNS Server 2 # String # P83183 = # Preferred DNS Server # String # P83184 = ########################################## # Available Wi-Fi-- Wi-Fi 3 ########################################## # ESSID # String # P83200 = # Security Mode # Number: 0=None, 8=Auto, 1=WEP, 4=WPA, 5=WPA-802.1x, 9=WPA3-SAE, 10=WPA3-802.1x. Default is 0 # Mandatory # P83202 = 0 # Password # String # P83203 = # EAP Method (when security mode set to WPA-802.1x) # Number: 0=PEAP,1=TLS,2=TTLS,3=PWD. Default is 0 # P83204 = 0 # (when EAP Method set to PEAP) # Phase 2 Authentication # Number: 0=None, 1=PAP,2=MSCHAP,3=MSCHAPv2,4=GTC. Default is 0 # P83213 = 0 # CA Certificate # String # P83211 = # Anonymous Identity # String # P83212 = # Identity # String # P83214 = # Identity Password # String # P83215 = # (when EAP Method set to TLS) # TLS CA Certificate # String # P83207 = # TLS Client Certificate # String # P83208 = # TLS Identity # String # P83209 = # TLS Client Certificate Password # String # P83210 = # (when EAP Method set to PWD) # PWD Identity # String # P83205 = # PWD Identity Password # String # P83206 = # IP Mode # Number: 0=Both, prefer IPv4,1=Both, prefer IPv6,2=IPv4 Only,3=IPv6 Only. Default is 0 # P83251 = 0 # IPv4 Mode # Number: 0=DHCP,1=Static. Default is 0 # P83252 = 0 # # IPv6 Mode # Number: 0=Auto-configured,1=Statically configured. Default is 0 # P83277 = 0 ########################################## # IPv4 Statically Configured ########################################## # IPv4 Address. # Number: 0 - 255 # P83253 = # Number: 0 - 255 # P83254 = # Number: 0 - 255 # P83255 = # Number: 0 - 255 # P83256 = # Subnet Mask # Number: 0 - 255 # P83257 = # Number: 0 - 255 # P83258 = # Number: 0 - 255 # P83259 = # Number: 0 - 255 # P83260 = # Gateway # Number: 0 - 255 # P83261 = # Number: 0 - 255 # P83262 = # Number: 0 - 255 # P83263 = # Number: 0 - 255 # P83264 = # DNS Server 1 # Number: 0 - 255 # P83265 = # Number: 0 - 255 # P83266 = # Number: 0 - 255 # P83267 = # Number: 0 - 255 # P83268 = # DNS Server 2 # Number: 0 - 255 # P83269 = # Number: 0 - 255 # P83270 = # Number: 0 - 255 # P83271 = # Number: 0 - 255 # P83272 = # Preferred DNS server # Number: 0 - 255 # P83273 = # Number: 0 - 255 # P83274 = # Number: 0 - 255 # P83275 = # Number: 0 - 255 # P83276 = ########################################## # IPv6 Statically Configured ########################################## # Static Mode. # Number: 0=Full Static,1=Prefix Static. Default is 0 # P83278 = 0 # IPv6 Address # String # P83279 = # IPv6 Prefix length # Number # P83280 = # IPv6 Prefix (64 bits) # String # P83281 = # DNS Server 1 # String # P83282 = # DNS Server 2 # String # P83283 = # Preferred DNS Server # String # P83284 = ########################################## # Available Wi-Fi-- Wi-Fi 4 ########################################## # ESSID # String # P83300 = # Security Mode # Number: 0=None, 8=Auto, 1=WEP, 4=WPA, 5=WPA-802.1x, 9=WPA3-SAE, 10=WPA3-802.1x. Default is 0 # Mandatory # P83302 = 0 # Password # String # P83303 = # EAP Method (when security mode set to WPA-802.1x) # Number: 0=PEAP,1=TLS,2=TTLS,3=PWD. Default is 0 # P83304 = 0 # (when EAP Method set to PEAP) # Phase 2 Authentication # Number: 0=None, 1=PAP,2=MSCHAP,3=MSCHAPv2,4=GTC. Default is 0 # P83313 = 0 # CA Certificate # String # P83311 = # Anonymous Identity # String # P83312 = # Identity # String # P83314 = # Identity Password # String # P83315 = # (when EAP Method set to TLS) # TLS CA Certificate # String # P83307 = # TLS Client Certificate # String # P83308 = # TLS Identity # String # P83309 = # TLS Client Certificate Password # String # P83310 = # (when EAP Method set to PWD) # PWD Identity # String # P83305 = # PWD Identity Password # String # P83306 = # IP Mode # Number: 0=Both, prefer IPv4,1=Both, prefer IPv6,2=IPv4 Only,3=IPv6 Only. Default is 0 # P83351 = 0 # IPv4 Mode # Number: 0=DHCP,1=Static. Default is 0 # P83352 = 0 # # IPv6 Mode # Number: 0=Auto-configured,1=Statically configured. Default is 0 # P83377 = 0 ########################################## # IPv4 Statically Configured ########################################## # IPv4 Address. # Number: 0 - 255 # P83353 = # Number: 0 - 255 # P83354 = # Number: 0 - 255 # P83355 = # Number: 0 - 255 # P83356 = # Subnet Mask # Number: 0 - 255 # P83357 = # Number: 0 - 255 # P83358 = # Number: 0 - 255 # P83359 = # Number: 0 - 255 # P83360 = # Gateway # Number: 0 - 255 # P83361 = # Number: 0 - 255 # P83362 = # Number: 0 - 255 # P83363 = # Number: 0 - 255 # P83364 = # DNS Server 1 # Number: 0 - 255 # P83365 = # Number: 0 - 255 # P83366 = # Number: 0 - 255 # P83367 = # Number: 0 - 255 # P83368 = # DNS Server 2 # Number: 0 - 255 # P83369 = # Number: 0 - 255 # P83270 = # Number: 0 - 255 # P83371 = # Number: 0 - 255 # P83372 = # Preferred DNS server # Number: 0 - 255 # P83373 = # Number: 0 - 255 # P83374 = # Number: 0 - 255 # P83375 = # Number: 0 - 255 # P83376 = ########################################## # IPv6 Statically Configured ########################################## # Static Mode. # Number: 0=Full Static,1=Prefix Static. Default is 0 # P83378 = 0 # IPv6 Address # String # P83379 = # IPv6 Prefix length # Number # P83380 = # IPv6 Prefix (64 bits) # String # P83381 = # DNS Server 1 # String # P83382 = # DNS Server 2 # String # P83383 = # Preferred DNS Server # String # P83384 = ########################################## # Available Wi-Fi-- Wi-Fi 5 ########################################## # ESSID # String # P83400 = # Security Mode # Number: 0=None, 8=Auto, 1=WEP, 4=WPA, 5=WPA-802.1x, 9=WPA3-SAE, 10=WPA3-802.1x. Default is 0 # Mandatory # P83402 = 0 # Password # String # P83403 = # EAP Method (when security mode set to WPA-802.1x) # Number: 0=PEAP,1=TLS,2=TTLS,3=PWD. Default is 0 # P83404 = 0 # (when EAP Method set to PEAP) # Phase 2 Authentication # Number: 0=None, 1=PAP,2=MSCHAP,3=MSCHAPv2,4=GTC. Default is 0 # P83413 = 0 # CA Certificate # String # P83411 = # Anonymous Identity # String # P83412 = # Identity # String # P83414 = # Identity Password # String # P83415 = # (when EAP Method set to TLS) # TLS CA Certificate # String # P83407 = # TLS Client Certificate # String # P83408 = # TLS Identity # String # P83409 = # TLS Client Certificate Password # String # P83410 = # (when EAP Method set to PWD) # PWD Identity # String # P83405 = # PWD Identity Password # String # P83406 = # IP Mode # Number: 0=Both, prefer IPv4,1=Both, prefer IPv6,2=IPv4 Only,3=IPv6 Only. Default is 0 # P83451 = 0 # IPv4 Mode # Number: 0=DHCP,1=Static. Default is 0 # P83452 = 0 # # IPv6 Mode # Number: 0=Auto-configured,1=Statically configured. Default is 0 # P83477 = 0 ########################################## # IPv4 Statically Configured ########################################## # IPv4 Address. # Number: 0 - 255 # P83453 = # Number: 0 - 255 # P83454 = # Number: 0 - 255 # P83455 = # Number: 0 - 255 # P83456 = # Subnet Mask # Number: 0 - 255 # P83457 = # Number: 0 - 255 # P83458 = # Number: 0 - 255 # P83459 = # Number: 0 - 255 # P83460 = # Gateway # Number: 0 - 255 # P83461 = # Number: 0 - 255 # P83462 = # Number: 0 - 255 # P83463 = # Number: 0 - 255 # P83464 = # DNS Server 1 # Number: 0 - 255 # P83465 = # Number: 0 - 255 # P83466 = # Number: 0 - 255 # P83467 = # Number: 0 - 255 # P83468 = # DNS Server 2 # Number: 0 - 255 # P83469 = # Number: 0 - 255 # P83470 = # Number: 0 - 255 # P83471 = # Number: 0 - 255 # P83472 = # Preferred DNS server # Number: 0 - 255 # P83473 = # Number: 0 - 255 # P83474 = # Number: 0 - 255 # P83475 = # Number: 0 - 255 # P83476 = ########################################## # IPv6 Statically Configured ########################################## # Static Mode. # Number: 0=Full Static,1=Prefix Static. Default is 0 # P83478 = 0 # IPv6 Address # String # P83479 = # IPv6 Prefix length # Number # P83480 = # IPv6 Prefix (64 bits) # String # P83481 = # DNS Server 1 # String # P83482 = # DNS Server 2 # String # P83483 = # Preferred DNS Server # String # P83484 = ########################################## # Available Wi-Fi-- Wi-Fi 6 ########################################## # ESSID # String # P83500 = # Security Mode # Number: 0=None, 8=Auto, 1=WEP, 4=WPA, 5=WPA-802.1x, 9=WPA3-SAE, 10=WPA3-802.1x. Default is 0 # Mandatory # P83502 = 0 # Password # String # P83503 = # EAP Method (when security mode set to WPA-802.1x) # Number: 0=PEAP,1=TLS,2=TTLS,3=PWD. Default is 0 # P83504 = 0 # (when EAP Method set to PEAP) # Phase 2 Authentication # Number: 0=None, 1=PAP,2=MSCHAP,3=MSCHAPv2,4=GTC. Default is 0 # P83513 = 0 # CA Certificate # String # P83511 = # Anonymous Identity # String # P83512 = # Identity # String # P83514 = # Identity Password # String # P83515 = # (when EAP Method set to TLS) # TLS CA Certificate # String # P83507 = # TLS Client Certificate # String # P83508 = # TLS Identity # String # P83509 = # TLS Client Certificate Password # String # P83510 = # (when EAP Method set to PWD) # PWD Identity # String # P83505 = # PWD Identity Password # String # P83506 = # IP Mode # Number: 0=Both, prefer IPv4,1=Both, prefer IPv6,2=IPv4 Only,3=IPv6 Only. Default is 0 # P83551 = 0 # IPv4 Mode # Number: 0=DHCP,1=Static. Default is 0 # P83552 = 0 # # IPv6 Mode # Number: 0=Auto-configured,1=Statically configured. Default is 0 # P83577 = 0 ########################################## # IPv4 Statically Configured ########################################## # IPv4 Address. # Number: 0 - 255 # P83553 = # Number: 0 - 255 # P83554 = # Number: 0 - 255 # P83555 = # Number: 0 - 255 # P83556 = # Subnet Mask # Number: 0 - 255 # P83557 = # Number: 0 - 255 # P83558 = # Number: 0 - 255 # P83559 = # Number: 0 - 255 # P83560 = # Gateway # Number: 0 - 255 # P83561 = # Number: 0 - 255 # P83562 = # Number: 0 - 255 # P83563 = # Number: 0 - 255 # P83564 = # DNS Server 1 # Number: 0 - 255 # P83565 = # Number: 0 - 255 # P83566 = # Number: 0 - 255 # P83567 = # Number: 0 - 255 # P83568 = # DNS Server 2 # Number: 0 - 255 # P83569 = # Number: 0 - 255 # P83570 = # Number: 0 - 255 # P83571 = # Number: 0 - 255 # P83572 = # Preferred DNS server # Number: 0 - 255 # P83573 = # Number: 0 - 255 # P83574 = # Number: 0 - 255 # P83575 = # Number: 0 - 255 # P83576 = ########################################## # IPv6 Statically Configured ########################################## # Static Mode. # Number: 0=Full Static,1=Prefix Static. Default is 0 # P83578 = 0 # IPv6 Address # String # P83579 = # IPv6 Prefix length # Number # P83580 = # IPv6 Prefix (64 bits) # String # P83581 = # DNS Server 1 # String # P83582 = # DNS Server 2 # String # P83583 = # Preferred DNS Server # String # P83584 = ########################################## # Available Wi-Fi-- Wi-Fi 7 ########################################## # ESSID # String # P83600 = # Security Mode # Number: 0=None, 8=Auto, 1=WEP, 4=WPA, 5=WPA-802.1x, 9=WPA3-SAE, 10=WPA3-802.1x. Default is 0 # Mandatory # P83602 = 0 # Password # String # P83603 = # EAP Method (when security mode set to WPA-802.1x) # Number: 0=PEAP,1=TLS,2=TTLS,3=PWD. Default is 0 # P83604 = 0 # (when EAP Method set to PEAP) # Phase 2 Authentication # Number: 0=None, 1=PAP,2=MSCHAP,3=MSCHAPv2,4=GTC. Default is 0 # P83613 = 0 # CA Certificate # String # P83611 = # Anonymous Identity # String # P83612 = # Identity # String # P83614 = # Identity Password # String # P83615 = # (when EAP Method set to TLS) # TLS CA Certificate # String # P83607 = # TLS Client Certificate # String # P83608 = # TLS Identity # String # P83609 = # TLS Client Certificate Password # String # P83610 = # (when EAP Method set to PWD) # PWD Identity # String # P83605 = # PWD Identity Password # String # P83606 = # IP Mode # Number: 0=Both, prefer IPv4,1=Both, prefer IPv6,2=IPv4 Only,3=IPv6 Only. Default is 0 # P83651 = 0 # IPv4 Mode # Number: 0=DHCP,1=Static. Default is 0 # P83652 = 0 # # IPv6 Mode # Number: 0=Auto-configured,1=Statically configured. Default is 0 # P83677 = 0 ########################################## # IPv4 Statically Configured ########################################## # IPv4 Address. # Number: 0 - 255 # P83653 = # Number: 0 - 255 # P83654 = # Number: 0 - 255 # P83655 = # Number: 0 - 255 # P83656 = # Subnet Mask # Number: 0 - 255 # P83657 = # Number: 0 - 255 # P83658 = # Number: 0 - 255 # P83659 = # Number: 0 - 255 # P83660 = # Gateway # Number: 0 - 255 # P83661 = # Number: 0 - 255 # P83662 = # Number: 0 - 255 # P83663 = # Number: 0 - 255 # P83664 = # DNS Server 1 # Number: 0 - 255 # P83665 = # Number: 0 - 255 # P83666 = # Number: 0 - 255 # P83667 = # Number: 0 - 255 # P83668 = # DNS Server 2 # Number: 0 - 255 # P83669 = # Number: 0 - 255 # P83670 = # Number: 0 - 255 # P83671 = # Number: 0 - 255 # P83672 = # Preferred DNS server # Number: 0 - 255 # P83673 = # Number: 0 - 255 # P83674 = # Number: 0 - 255 # P83675 = # Number: 0 - 255 # P83676 = ########################################## # IPv6 Statically Configured ########################################## # Static Mode. # Number: 0=Full Static,1=Prefix Static. Default is 0 # P83678 = 0 # IPv6 Address # String # P83679 = # IPv6 Prefix length # Number # P83680 = # IPv6 Prefix (64 bits) # String # P83681 = # DNS Server 1 # String # P83682 = # DNS Server 2 # String # P83683 = # Preferred DNS Server # String # P83684 = ########################################## # Available Wi-Fi-- Wi-Fi 8 ########################################## # ESSID # String # P83700 = # Security Mode # Number: 0=None, 8=Auto, 1=WEP, 4=WPA, 5=WPA-802.1x, 9=WPA3-SAE, 10=WPA3-802.1x. Default is 0 # Mandatory # P83702 = 0 # Password # String # P83703 = # EAP Method (when security mode set to WPA-802.1x) # Number: 0=PEAP,1=TLS,2=TTLS,3=PWD. Default is 0 # P83704 = 0 # (when EAP Method set to PEAP) # Phase 2 Authentication # Number: 0=None, 1=PAP,2=MSCHAP,3=MSCHAPv2,4=GTC. Default is 0 # P83713 = 0 # CA Certificate # String # P83711 = # Anonymous Identity # String # P83712 = # Identity # String # P83714 = # Identity Password # String # P83715 = # (when EAP Method set to TLS) # TLS CA Certificate # String # P83707 = # TLS Client Certificate # String # P83708 = # TLS Identity # String # P83709 = # TLS Client Certificate Password # String # P83710 = # (when EAP Method set to PWD) # PWD Identity # String # P83705 = # PWD Identity Password # String # P83706 = # IP Mode # Number: 0=Both, prefer IPv4,1=Both, prefer IPv6,2=IPv4 Only,3=IPv6 Only. Default is 0 # P83751 = 0 # IPv4 Mode # Number: 0=DHCP,1=Static. Default is 0 # P83752 = 0 # # IPv6 Mode # Number: 0=Auto-configured,1=Statically configured. Default is 0 # P83777 = 0 ########################################## # IPv4 Statically Configured ########################################## # IPv4 Address. # Number: 0 - 255 # P83753 = # Number: 0 - 255 # P83754 = # Number: 0 - 255 # P83755 = # Number: 0 - 255 # P83756 = # Subnet Mask # Number: 0 - 255 # P83757 = # Number: 0 - 255 # P83758 = # Number: 0 - 255 # P83759 = # Number: 0 - 255 # P83760 = # Gateway # Number: 0 - 255 # P83761 = # Number: 0 - 255 # P83762 = # Number: 0 - 255 # P83763 = # Number: 0 - 255 # P83764 = # DNS Server 1 # Number: 0 - 255 # P83765 = # Number: 0 - 255 # P83766 = # Number: 0 - 255 # P83767 = # Number: 0 - 255 # P83768 = # DNS Server 2 # Number: 0 - 255 # P83769 = # Number: 0 - 255 # P83770 = # Number: 0 - 255 # P83771 = # Number: 0 - 255 # P83772 = # Preferred DNS server # Number: 0 - 255 # P83773 = # Number: 0 - 255 # P83774 = # Number: 0 - 255 # P83775 = # Number: 0 - 255 # P83776 = ########################################## # IPv6 Statically Configured ########################################## # Static Mode. # Number: 0=Full Static,1=Prefix Static. Default is 0 # P83778 = 0 # IPv6 Address # String # P83779 = # IPv6 Prefix length # Number # P83780 = # IPv6 Prefix (64 bits) # String # P83781 = # DNS Server 1 # String # P83782 = # DNS Server 2 # String # P83783 = # Preferred DNS Server # String # P83784 = ########################################## # Available Wi-Fi-- Wi-Fi 9 ########################################## # ESSID # String # P83800 = # Security Mode # Number: 0=None, 8=Auto, 1=WEP, 4=WPA, 5=WPA-802.1x, 9=WPA3-SAE, 10=WPA3-802.1x. Default is 0 # Mandatory # P83802 = 0 # Password # String # P83803 = # EAP Method (when security mode set to WPA-802.1x) # Number: 0=PEAP,1=TLS,2=TTLS,3=PWD. Default is 0 # P83804 = 0 # (when EAP Method set to PEAP) # Phase 2 Authentication # Number: 0=None, 1=PAP,2=MSCHAP,3=MSCHAPv2,4=GTC. Default is 0 # P83813 = 0 # CA Certificate # String # P83811 = # Anonymous Identity # String # P83812 = # Identity # String # P83814 = # Identity Password # String # P83815 = # (when EAP Method set to TLS) # TLS CA Certificate # String # P83807 = # TLS Client Certificate # String # P83808 = # TLS Identity # String # P83809 = # TLS Client Certificate Password # String # P83810 = # (when EAP Method set to PWD) # PWD Identity # String # P83805 = # PWD Identity Password # String # P83806 = # IP Mode # Number: 0=Both, prefer IPv4,1=Both, prefer IPv6,2=IPv4 Only,3=IPv6 Only. Default is 0 # P83851 = 0 # IPv4 Mode # Number: 0=DHCP,1=Static. Default is 0 # P83852 = 0 # # IPv6 Mode # Number: 0=Auto-configured,1=Statically configured. Default is 0 # P83877 = 0 ########################################## # IPv4 Statically Configured ########################################## # IPv4 Address. # Number: 0 - 255 # P83853 = # Number: 0 - 255 # P83854 = # Number: 0 - 255 # P83855 = # Number: 0 - 255 # P83856 = # Subnet Mask # Number: 0 - 255 # P83857 = # Number: 0 - 255 # P83858 = # Number: 0 - 255 # P83859 = # Number: 0 - 255 # P83860 = # Gateway # Number: 0 - 255 # P83861 = # Number: 0 - 255 # P83862 = # Number: 0 - 255 # P83863 = # Number: 0 - 255 # P83864 = # DNS Server 1 # Number: 0 - 255 # P83865 = # Number: 0 - 255 # P83866 = # Number: 0 - 255 # P83867 = # Number: 0 - 255 # P83868 = # DNS Server 2 # Number: 0 - 255 # P83869 = # Number: 0 - 255 # P83870 = # Number: 0 - 255 # P83871 = # Number: 0 - 255 # P83872 = # Preferred DNS server # Number: 0 - 255 # P83873 = # Number: 0 - 255 # P83874 = # Number: 0 - 255 # P83875 = # Number: 0 - 255 # P83876 = ########################################## # IPv6 Statically Configured ########################################## # Static Mode. # Number: 0=Full Static,1=Prefix Static. Default is 0 # P83878 = 0 # IPv6 Address # String # P83879 = # IPv6 Prefix length # Number # P83880 = # IPv6 Prefix (64 bits) # String # P83881 = # DNS Server 1 # String # P83882 = # DNS Server 2 # String # P83883 = # Preferred DNS Server # String # P83884 = ########################################## # Available Wi-Fi-- Wi-Fi 10 ########################################## # ESSID # String # P83900 = # Security Mode # Number: 0=None, 8=Auto, 1=WEP, 4=WPA, 5=WPA-802.1x, 9=WPA3-SAE, 10=WPA3-802.1x. Default is 0 # Mandatory # P83902 = 0 # Password # String # P83903 = # EAP Method (when security mode set to WPA-802.1x) # Number: 0=PEAP,1=TLS,2=TTLS,3=PWD. Default is 0 # P83904 = 0 # (when EAP Method set to PEAP) # Phase 2 Authentication # Number: 0=None, 1=PAP,2=MSCHAP,3=MSCHAPv2,4=GTC. Default is 0 # P83913 = 0 # CA Certificate # String # P83911 = # Anonymous Identity # String # P83912 = # Identity # String # P83914 = # Identity Password # String # P83915 = # (when EAP Method set to TLS) # TLS CA Certificate # String # P83907 = # TLS Client Certificate # String # P83908 = # TLS Identity # String # P83909 = # TLS Client Certificate Password # String # P83910 = # (when EAP Method set to PWD) # PWD Identity # String # P83905 = # PWD Identity Password # String # P83906 = # IP Mode # Number: 0=Both, prefer IPv4,1=Both, prefer IPv6,2=IPv4 Only,3=IPv6 Only. Default is 0 # P83951 = 0 # IPv4 Mode # Number: 0=DHCP,1=Static. Default is 0 # P83952 = 0 # # IPv6 Mode # Number: 0=Auto-configured,1=Statically configured. Default is 0 # P83977 = 0 ########################################## # IPv4 Statically Configured ########################################## # IPv4 Address. # Number: 0 - 255 # P83953 = # Number: 0 - 255 # P83954 = # Number: 0 - 255 # P83955 = # Number: 0 - 255 # P83956 = # Subnet Mask # Number: 0 - 255 # P83957 = # Number: 0 - 255 # P83958 = # Number: 0 - 255 # P83959 = # Number: 0 - 255 # P83960 = # Gateway # Number: 0 - 255 # P83961 = # Number: 0 - 255 # P83962 = # Number: 0 - 255 # P83963 = # Number: 0 - 255 # P83964 = # DNS Server 1 # Number: 0 - 255 # P83965 = # Number: 0 - 255 # P83966 = # Number: 0 - 255 # P83967 = # Number: 0 - 255 # P83968 = # DNS Server 2 # Number: 0 - 255 # P83969 = # Number: 0 - 255 # P83970 = # Number: 0 - 255 # P83971 = # Number: 0 - 255 # P83972 = # Preferred DNS server # Number: 0 - 255 # P83973 = # Number: 0 - 255 # P83974 = # Number: 0 - 255 # P83975 = # Number: 0 - 255 # P83976 = ########################################## # IPv6 Statically Configured ########################################## # Static Mode. # Number: 0=Full Static,1=Prefix Static. Default is 0 # P83978 = 0 # IPv6 Address # String # P83979 = # IPv6 Prefix length # Number # P83980 = # IPv6 Prefix (64 bits) # String # P83981 = # DNS Server 1 # String # P83982 = # DNS Server 2 # String # P83983 = # Preferred DNS Server # String # P83984 = #################################################################### # OpenVPN Settings ## #################################################################### # OpenVPN Enable. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P7050 = 0 # OpenVPN Server Address # String P7051 = # OpenVPN Port. Default is 1194 # Number # Mandatory P7052 = 1194 # OpenVPN Transport. 0 - UDP, 1 - TCP, 2 - UDP IPv4 Only, 3 - TCP IPv4 Only, 4 - UDP IPv6 Only, 5 - TCP IPv6 Only. Default is 0 # Number: 0, 1 # Mandatory P2912 = 0 # OpenVPN CA # String # P9902 = # OpenVPN Certificate # String # P9903 = # OpenVPN Client Key # String # P9904 = # OpenVPN Client Key Password # String P20715 = # OpenVPN TLS Key # String # P22371 = # OpenVPN® TLS Key Type. 0 - None, 1 - TLS-Auth, 2 - TLS-Crypt, 3 - TLS-Crypt v2. Default is 0 # Number # Mandatory P22457 = 0 # OpenVPN Cipher Method. 0 - Blowfish, 1 - AES-128, 2 - AES-256, 3 - Triple-DES. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P8396 = 0 # OpenVPN Username # String P8394 = # OpenVPN Password # String P8395 = # OpenVPN Comp-lzo. 0 - Disabled, 1 - Enabled. Default is 1 # Number: 0, 1 # Mandatory P8508 = 1 # Additional Options # String P8460 = #################################################################### # Advanced Settings ## #################################################################### #################################################################### # Advanced Settings/Advanced Network Settings #################################################################### # DNS Refresh Timer (m) # Number: 0 - 1440. Default is 0 # Mandatory P4208 = 0 # DNS Failure Cache Duration (m) # Number: 0 - 1440. Default is 0 # Mandatory P28160 = 0 # Enable LLDP. 0 - Disabled, 1 - Enabled. Default is 1 # Number: 0, 1 # Mandatory P1684 = 1 # LLDP TX Interval. Default is 60 # Number: 1 - 3600 # Mandatory P22122 = 60 # Enable CDP. 0 - Disabled, 1 - Enabled. Default is 1 # Number: 0, 1 # Mandatory P22119 = 1 # Layer 3 QoS for SIP # Number:0 - 63 # Mandatory P1558 = 26 # Layer 3 QoS for RTP # Number:0 - 63 # Mandatory P1559 = 46 # Enable DHCP VLAN. 0 - Disable, 1 - Enable. Default is 0. # Number: 0,1 # Mandatory P8300 = 0 # Enable Manual VLAN Configuration. 0 - Disable, 1 - Enable. Default is 1. # Number: 0,1 # Mandatory P22174 = 1 # Layer 2 QoS 802.1Q/VLAN Tag (VLAN classification for RTP). Default is 0 # Number: 0 - 4094 # Mandatory P51 = 0 # Layer 2 QoS 802.1p Priority Value (0 - 7). Default is 0 # Number: 0 - 7 # Mandatory P87 = 0 # Maximum Transmission Unit(MTU). Default is 1500 # Number: 576 - 1500 # Mandatory P244 = 1500 #################################################################### # Advanced Settings/PC Port Mode #################################################################### # PC Port Mode. 0 - Enable But Not Mirrored, 1 - Disabled, 2 - Enabled and Mirrored. Default is 0 # Number: 0, 1, 2 # Mandatory P1348 = 0 # PC Port VLAN Tag. Default is 0 # Number: 0 - 4094 #Mandatory P229 = 0 # PC Port Priority Value. Default is 0 # Number: 0 - 7 # Mandatory P230 = 0 #################################################################### # Advanced Settings/Proxy #################################################################### # HTTP Proxy # String P1552 = # HTTPS Proxy # String P1553 = # Bypass Proxy for # String P22011 = #################################################################### # Advanced Settings/Remote Control #################################################################### # Action URI Support. 0 - Disabled, 1 - Enabled # Number: 0, 1. Default is 1 # Mandatory P32050 = 1 # Remote Control Popup Window Support. 0 - Disabled, 1 - Enabled # Number: 0, 1. Default is 1 # Mandatory P32051 = 1 # Action URI Allowed IP List # String P32052 = # CSTA Control. 0 - Disabled, 1 - Enabled # Number: 0, 1. Default is 0 # Mandatory P32053 = 0 #################################################################### # Advanced Settings/CTI Settings(GRP2603/2604 Only) #################################################################### # Affinity Support. 0 - Disabled, 1 - Enabled # Number: 0, 1. Default is 0 # Mandatory P8334 = 0 # Preferred Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0 - 5. Default is 0 # Mandatory P8335 = 0 #################################################################### # Advanced Settings/Static DNS Cache/NAPTR #################################################################### # Add 1~18 # NAPTR DNS Cache Name # String # P93000 / P93020 / P93040 / P93060 / P93080 / P93100 / P93120 / P93140 / P93160 / P93180 / P93200 / P93220 / P93240 / P93260 / P93280 / P93300 / P93320 / P93340 = # NAPTR DNS Cache Time Interval (s) # Number: 0 - 65535. Default is 300. # P93001 / P93021 / P93041 / P93061 / P93081 / P93101 / P93121 / P93141 / P93161 / P93181 / P93201 / P93221 / P93241 / P93261 / P93281 / P93301 / P93321 / P93341 = 300 # NAPTR DNS Cache Order # Number: 0 - 65535 # P93002 / P93022 / P93042 / P93062 / P93082 / P93102 / P93122 / P93142 / P93162 / P93182 / P93202 / P93222 / P93242 / P93262 / P93282 / P93302 / P93322 / P93342 = 0 # NAPTR DNS Cache Preference # Number: 0 - 65535 # P93003 / P93023 / P93043 / P93063 / P93083 / P93103 / P93123 / P93143 / P93163 / P93183 / P93203 / P93223 / P93243 / P93263 / P93283 / P93303 / P93323 / P93343 = # NAPTR DNS Cache Replacement # String # P93007 / P93027 / P93047 / P93067 / P93087 / P93107 / P93127 / P93147 / P93167 / P93187 / P93207 / P93227 / P93247 / P93267 / P93287 / P93307 / P93327 / P93347 = # NAPTR DNS Cache Service # String. Default is SIP+D2U # P93005 / P93025 / P93045 / P93065 / P93085 / P93105 / P93125 / P93145 / P93165 / P93185 / P93205 / P93225 / P93245 / P93265 / P93285 / P93305 / P93325 / P93345 = SIP+D2U #################################################################### # Advanced Settings/Static DNS Cache/SRV #################################################################### # Add 1~18 # SRV DNS Cache Name # String # P93008 / P93028 / P93048 / P93068 / P93088 / P93108 / P93128 / P93148 / P93168 / P93188 / P93208 / P93228 / P93248 / P93268 / P93288/ P93308 / P93328 / P93348 = # SRV DNS Cache Time Interval (s) # Number: 0 - 65535. Default is 300. # P93009 / P93029 / P93049 / P93069 / P93089 / P93109 / P93129 / P93149 / P93169 / P93189 / P93209 / P93229 / P93249 / P93269 / P93289 / P93309 / P93329 / P93349 = 300 # SRV DNS Cache Priority # Number: 0 - 65535. Default is 0 # P93010 / P93030 / P93050 / P93070 / P93090 / P93110 / P93130 / P93150 / P93170 / P93190 / P93210 / P93230 / P93250 / P93270 / P93290 / P93310 / P93330 / P93350 = 0 # SRV DNS Cahce Weight # Number: 0 - 65535. Default is 0 # P93011 / P93031 / P93051 / P93071 / P93091 / P93111 / P93131 / P93151 / P93171 / P93191 / P93211 / P93231 / P93251 / P93271 / P93291 / P93311 / P93331 / P93351= 0 # SRV DNS Cache Target # String # P93013 / P93033 / P93053 / P93073 / P93093 / P93113 / P93133 / P93153 / P93173 / P93193 / P93213 / P93233 / P93253 / P93273/ P93293 / P93313 / P93333 / P93353= # SRV DNS Cache Port # Number: 0 - 65535. # P93012 / P93032 / P93052 / P93072 / P93092 / P93112 / P93132 / P93152 / P93172 / P93192 / P93212 / P93232 / P93252 / P93272 / P93292 / P93312 / P93332 / P93352 = #################################################################### # Advanced Settings/Static DNS Cache/A #################################################################### # Add 1~18 # A DNS Cache Name # String # P93014 / P93034 / P93054 / P93074/ P93094 / P93114 / P93134 / P93154 / P93174 / P93194 / P93214 / P93234/P93254 / P93274 / P93294 / P93314 / P93334 / P93354 = # A DNS Cache Time Interval # Number: 0 - 65535. Default is 300. # P93015 / P93035 / P93055 / P93075 / P93095 / P93115 / P93135 / P93155 / P93175 / P93195 / P93215 / P93235 / P93255 / P93275 / P93295 / P93315 / P93335 /P93355= 300 # A DNS Cache IP Address # String # P93016 / P93036 / P93056 / P93076 / P93096 / P93116 / P93136 / P93156 / P93176 / P93196 / P93216 / P93236 / P93256 / P93276 / P93296 / P93316 / P93336 / P93356 = #################################################################### # Programmable Keys ## #################################################################### #################################################################### # Multi-Purpose Keys ## #################################################################### #################################################################### # Multi-Purpose Keys/Key Settings GRP2604 only #################################################################### # MPK 1 #################################################################### # Key Mode. # Number: -1 - 23, 25, 28, 29, 33, 34, 36 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10) , LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17), Information (19), Message (20), # Forward (21), DND (22), Redial (23), MulticastListenAddress (25), GDSOpenDoor(27),EventListPresence (28), Provision (29), # MulticastPagingAddress (33),HTTPCMD(34) CallFlip(36) P323 = -1 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5 # Mandatory P301 = 0 # Description. Max length allowed is 256 characters. # String P302 = # Value. Max length allowed is 256 characters. # String P303 = #################################################################### # MPK 2 #################################################################### # Key Mode. # Number: -1 - 23, 25, 28, 29, 33, 34, 36 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10) , LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17), Information (19), Message (20), # Forward (21), DND (22), Redial (23), MulticastListenAddress (25), GDSOpenDoor(27),EventListPresence (28), Provision (29), # MulticastPagingAddress (33),HTTPCMD(34) CallFlip(36) P324 = -1 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5 # Mandatory P304 = 0 # Description. Max length allowed is 256 characters. # String P305 = # Value. Max length allowed is 256 characters. # String P306 = #################################################################### # MPK 3 #################################################################### # Key Mode. # Number: -1 - 23, 25, 28, 29, 33, 34, 36 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10) , LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17), Information (19), Message (20), # Forward (21), DND (22), Redial (23), MulticastListenAddress (25), GDSOpenDoor(27),EventListPresence (28), Provision (29), # MulticastPagingAddress (33),HTTPCMD(34) CallFlip(36) P325 = -1 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5 # Mandatory P307 = 0 # Description. Max length allowed is 256 characters. # String P308 = # Value. Max length allowed is 256 characters. # String P309 = #################################################################### # MPK 4 #################################################################### # Key Mode. # Number: -1 - 23, 25, 28, 29, 33, 34, 36 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10) , LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17), Information (19), Message (20), # Forward (21), DND (22), Redial (23), MulticastListenAddress (25), GDSOpenDoor(27),EventListPresence (28), Provision (29), # MulticastPagingAddress (33),HTTPCMD(34) CallFlip(36) P326 = -1 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5 # Mandatory P310 = 0 # Description. Max length allowed is 256 characters. # String P311 = # Value. Max length allowed is 256 characters. # String P312 = #################################################################### # MPK 5 #################################################################### # Key Mode. # Number: -1 - 23, 25, 28, 29, 33, 34, 36 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10) , LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17), Information (19), Message (20), # Forward (21), DND (22), Redial (23), MulticastListenAddress (25), GDSOpenDoor(27),EventListPresence (28), Provision (29), # MulticastPagingAddress (33),HTTPCMD(34) CallFlip(36) P327 = -1 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5 # Mandatory P313 = 0 # Description. Max length allowed is 256 characters. # String P314 = # Value. Max length allowed is 256 characters. # String P315 = #################################################################### # MPK 6 #################################################################### # Key Mode. # Number: -1 - 23, 25, 28, 29, 33, 34, 36 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10) , LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17), Information (19), Message (20), # Forward (21), DND (22), Redial (23), MulticastListenAddress (25), GDSOpenDoor(27),EventListPresence (28), Provision (29), # MulticastPagingAddress (33),HTTPCMD(34) CallFlip(36) P328 = -1 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5 # Mandatory P316 = 0 # Description. Max length allowed is 256 characters. # String P317 = # Value. Max length allowed is 256 characters. # String P318 = #################################################################### # MPK 7 #################################################################### # Key Mode. # Number: -1 - 23, 25, 28, 29, 33, 34, 36 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10) , LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17), Information (19), Message (20), # Forward (21), DND (22), Redial (23), MulticastListenAddress (25), GDSOpenDoor(27),EventListPresence (28), Provision (29), # MulticastPagingAddress (33),HTTPCMD(34) CallFlip(36) P329 = -1 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5 # Mandatory P319 = 0 # Description. Max length allowed is 256 characters. # String P320 = # Value. Max length allowed is 256 characters. # String P321 = #################################################################### # MPK 8 #################################################################### # Key Mode. # Number: -1 - 23, 25, 28, 29, 33, 34, 36 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10) , LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17), Information (19), Message (20), # Forward (21), DND (22), Redial (23), MulticastListenAddress (25), GDSOpenDoor(27),EventListPresence (28), Provision (29), # MulticastPagingAddress (33),HTTPCMD(34) CallFlip(36) P353 = -1 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5 # Mandatory P354 = 0 # Description. Max length allowed is 256 characters. # String P355 = # Value. Max length allowed is 256 characters. # String P356 = #################################################################### # MPK 9 #################################################################### # Key Mode. # Number: -1 - 23, 25, 28, 29, 33, 34, 36 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10) , LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17), Information (19), Message (20), # Forward (21), DND (22), Redial (23), MulticastListenAddress (25), GDSOpenDoor(27),EventListPresence (28), Provision (29), # MulticastPagingAddress (33),HTTPCMD(34) CallFlip(36) P357 = -1 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5 # Mandatory P358 = 0 # Description. Max length allowed is 256 characters. # String P359 = # Value. Max length allowed is 256 characters. # String P360 = #################################################################### # MPK 10 #################################################################### # Key Mode. # Number: -1 - 23, 25, 28, 29, 33, 34, 36 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10) , LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17), Information (19), Message (20), # Forward (21), DND (22), Redial (23), MulticastListenAddress (25), GDSOpenDoor(27),EventListPresence (28), Provision (29), # MulticastPagingAddress (33),HTTPCMD(34) CallFlip(36) P361 = -1 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5 # Mandatory P362 = 0 # Description. Max length allowed is 256 characters. # String P363 = # Value. Max length allowed is 256 characters. # String P364 = #################################################################### # Virtual Multi-Purpose Keys ## #################################################################### ###################################################################################### ############################ For GRP2604/P/GRP2603/P ########################### ###################################################################################### ###################################################################################### # VPK 1- fixed VPK ###################################################################################### # Key Mode for line VPK. Default is 31. # Number: -1 - 33 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Default (31), SharedLine (32), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P1363 = 31 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory # P1364 = 0 # Description. Max length allowed is 32 characters. # String # P1465 = # Value. Max length allowed is 64 characters. # String # P1466 = ###################################################################################### # VPK 2- fixed VPK ###################################################################################### # Key Mode for line VPK. Default is 31. # Number: -1 - 33 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Default (31), SharedLine (32), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P1365 = 31 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory # P1366 = 1 # Description. Max length allowed is 32 characters. # String # P1467 = # Value. Max length allowed is 64 characters. # String # P1468 = ###################################################################################### # VPK 3 - fixed VPK ###################################################################################### # Key Mode for line VPK. Default is 31. # Number: -1 - 33 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Default (31), SharedLine (32), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P1367 = 31 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory # P1368 = 2 # Description. Max length allowed is 32 characters. # String # P1469 = # Value. Max length allowed is 64 characters. # String # P1470 = ###################################################################################### # VPK 4 - fixed VPK ###################################################################################### # Key Mode for line VPK. Default is -1. # Number: -1 - 33 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Default (31), SharedLine (32), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P1369 = -1 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory # P1370 = 0 # Description. Max length allowed is 32 characters. # String # P1471 = # Value. Max length allowed is 64 characters. # String # P1472 = ###################################################################################### # VPK 5 - fixed VPK ###################################################################################### # Key Mode for default VPK. Default is -1. # Number: -1 - 33 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Default (31), SharedLine (32), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P1371 = -1 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory # P1372 = 0 # Description. Max length allowed is 32 characters. # String # P1473 = # Value. Max length allowed is 64 characters. # String # P1474 = ###################################################################################### # VPK 6 - fixed VPK ###################################################################################### # Key Mode for line VPK. Default is -1. # Number: -1 - 33 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Default (31), SharedLine (32), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P1373 = -1 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory # P1374 = 0 # Description. Max length allowed is 32 characters. # String # P1475 = # Value. Max length allowed is 64 characters. # String # P1476 = ###################################################################################### # VPK 7-Dynamic VPK ###################################################################################### # Key Mode for Dynamic VPK. Default is 0. # Number: 0 - 33 # SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P23800 = 0 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory # P23801 = 0 # Description. # String. # P23802 = # Value. # String. # P23803 = ##################################################################################### # VPK 8-Dynamic VPK ###################################################################################### # Key Mode for Dynamic VPK. Default is 0. # Number: 0 - 33 # SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P23804 = 0 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory # P23805 = 0 # Description. # String. # P23806 = # Value. # String. # P23807 = ###################################################################################### # VPK 9-Dynamic VPK ###################################################################################### # Key Mode for Dynamic VPK. Default is 0. # Number: 0 - 33 # SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P23808 = 0 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory # P23809 = 0 # Description. # String. # P23810 = # Value. # String. # P23811 = ###################################################################################### # VPK 10-Dynamic VPK ###################################################################################### # Key Mode for Dynamic VPK. Default is 0. # Number: 0 - 33 # SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P23812 = 0 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory # P23813 = 0 # Description. # String. # P23814 = # Value. # String. # P23815 = ###################################################################################### # VPK 11-Dynamic VPK ###################################################################################### # Key Mode for Dynamic VPK. Default is 0. # Number: 0 - 33 # SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P23816 = 0 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory # P23817 = 0 # Description. # String. # P23818 = # Value. # String. # P23819 = ###################################################################################### # VPK 12-Dynamic VPK ###################################################################################### # Key Mode for Dynamic VPK. Default is 0. # Number: 0 - 33 # SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P23820 = 0 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory # P23821 = 0 # Description. # String. # P23822 = # Value. # String. # P23823 = ###################################################################################### ############################ For GRP2602(W/P） ##################################### ###################################################################################### ###################################################################################### # VPK 1- fixed VPK ###################################################################################### # Key Mode for line VPK. Default is 31. # Number: -1 - 33 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Default (31), SharedLine (32), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P1363 = 31 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory # P1364 = 0 # Description. Max length allowed is 32 characters. # String # P1465 = # Value. Max length allowed is 64 characters. # String # P1466 = # Locked: 0 - uncheck, 1 - check. Default is 0 # Mandatory # Number: 0, 1 # P23968 = 0 ###################################################################################### # VPK 2- fixed VPK ###################################################################################### # Key Mode for line VPK. Default is 31. # Number: -1 - 33 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Default (31), SharedLine (32), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P1365 = 31 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4 # Number: 0, 1, 2, 3. Default is 0. # Mandatory # P1366 = 1 # Description. Max length allowed is 32 characters. # String # P1467 = # Value. Max length allowed is 64 characters. # String # P1468 = # Locked: 0 - uncheck, 1 - check. Default is 0 # Mandatory # Number: 0, 1 # P23969 = 0 ###################################################################################### # VPK 3 - fixed VPK ###################################################################################### # Key Mode for line VPK. Default is 31. # Number: -1 - 33 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Default (31), SharedLine (32), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P1367 = 31 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4 # Number: 0, 1, 2, 3. Default is 0. # Mandatory # P1368 = 2 # Description. Max length allowed is 32 characters. # String # P1469 = # Value. Max length allowed is 64 characters. # String # P1470 = # Locked: 0 - uncheck, 1 - check. Default is 0 # Mandatory # Number: 0, 1 # P23970 = 0 ###################################################################################### # VPK 4 - fixed VPK ###################################################################################### # Key Mode for line VPK. Default is -1. # Number: -1 - 33 # None (-1), SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Default (31), SharedLine (32), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P1369 = -1 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4 # Number: 0, 1, 2, 3. Default is 0. # Mandatory # P1370 = 0 # Description. Max length allowed is 32 characters. # String # P1471 = # Value. Max length allowed is 64 characters. # String # P1472 = # Locked: 0 - uncheck, 1 - check. Default is 0 # Mandatory # Number: 0, 1 # P23971 = 0 ###################################################################################### # VPK 5 - Dynamic VPK ###################################################################################### # Key Mode for default VPK. Default is -1. # Number: 0 - 33 # SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P1371 = 0 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4 # Number: 0, 1, 2, 3. Default is 0. # Mandatory # P1372 = 0 # Description. Max length allowed is 32 characters. # String # P1473 = # Value. Max length allowed is 64 characters. # String # P1474 = # Locked: 0 - uncheck, 1 - check. Default is 0 # Mandatory # Number: 0, 1 # P23972 = 0 ###################################################################################### # VPK 6 - Dynamic VPK ###################################################################################### # Key Mode for line VPK. Default is -1. # Number: 0 - 33 # SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P1373 = 0 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4 # Number: 0, 1, 2, 3. Default is 0. # Mandatory # P1374 = 0 # Description. Max length allowed is 32 characters. # String # P1475 = # Value. Max length allowed is 64 characters. # String # P1476 = # Locked: 0 - uncheck, 1 - check. Default is 0 # Mandatory # Number: 0, 1 # P23973 = 0 ###################################################################################### # VPK 7-Dynamic VPK ###################################################################################### # Key Mode for Dynamic VPK. Default is 0. # Number: 0 - 33 # SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P23800 = 0 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4 # Number: 0, 1, 2, 3. Default is 0. # Mandatory # P23801 = 0 # Description. # String. # P23802 = # Value. # String. # P23803 = ##################################################################################### # VPK 8-Dynamic VPK ###################################################################################### # Key Mode for Dynamic VPK. Default is 0. # Number: 0 - 33 # SpeedDial (0), BLF (1), PresenceWatcher (2), EventlistBLF (3), SpeedDialViaActiveAccount (4) # DialDTMF (5), VoiceMail (6), CallReturn (7), Transfer (8), CallPark (9), Intercom (10), LDAPSearch (11) # Conference (12), MulticastPaging (13), CallLog (15), MonitoredCallPark (16), Menu (17) # Information (19), Message (20), Forward (21), DND (22), Redial (23), MulticastListenAddress (25) # EventListPresence (28), Provision (29), Multicast Paging Address(33) # Please note string format is also accepted, here is the full list for the mode options strings, the string for the mode is case-insensitive. # none, line, shared, sharedline, speeddial, blf, presencewatcher, eventlistblf, speeddialaa, dialdtmf # voicemail, callreturn, transfer, callpark, intercom, ldapsearch, conference, multicastpaging # calllog, monitoredcp, moniteredcp(backward compatible version), menu, information, message, forward, dnd # redial, instantmessage, multicastlistenaddress, presenceeventlist, provision # P23804 = 0 # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4 # Number: 0, 1, 2, 3. Default is 0. # Mandatory # P23805 = 0 # Description. # String. # P23806 = # Value. # String. # P23807 = #################################################################### # Idle Screen Softkeys ## #################################################################### # Custom Idle Screen Softkey Layout # Number: 0 - No, 1 - Yes P2939 = 0 #################################################################### # Custom Softkey 1 #################################################################### # Key Mode # Number: 0, 4, 6 # SpeedDial (0), SpeedDialViaActiveAccount (4), VoiceMail (6) P2987 = # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5 # Mandatory P2988 = 0 # Label. Max length allowed is 256 characters. # String P2989 = # Value. Max length allowed is 256 characters. # String P2990 = #################################################################### # Custom Softkey 2 #################################################################### # Key Mode # Number: 0, 4, 6 # SpeedDial (0), SpeedDialViaActiveAccount (4), VoiceMail (6) P2991 = # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5 # Mandatory P2992 = 0 # Label. Max length allowed is 256 characters. # String P2993 = # Value. Max length allowed is 256 characters. # String P2994 = #################################################################### # Custom Softkey 3 #################################################################### # Key Mode # Number: 0, 4, 6 # SpeedDial (0), SpeedDialViaActiveAccount (4), VoiceMail (6) P2995 = # Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5 # Mandatory P2996 = 0 # Label. Max length allowed is 256 characters. # String P2997 = # Value. Max length allowed is 256 characters. # String P2998 = #################################################################### # Custom Idle Screen Softkey Layout #################################################################### # String:Logout,ParkedCalls,UCMCallFeatures,UCMCallCenter,BLF-Pickup,Custom-BS-Hoteling,Custom-IdleForwardAll,Custom-BS-History,Custom-Contacts,Custom-Menu,Custom-History,Custom-BS-Contacts,Custom-LDAP-Contacts,Custom-DND,Custom-Redial,Custom-CallReturn,Custom-Paging,Custom-BS-CallCenter,Custom-BS-EXEC-Asst,Custom-Remote-Contacts1,Custom-Remote-Contacts2,Custom-Remote-Contacts3 P8348 = Custom-Menu,Custom-History,Custom-Contacts,Custom-Redial,Custom-DND #################################################################### # Call Screen Softkeys ## #################################################################### # Custom Call Screen Softkey Layout # Number: 0 - No, 1 - Yes P2923 = 0 # Enforce Softkey Layout Position # Number: 0 - No, 1 - Yes P2924 = 0 #################################################################### # Custom Softkey 1 #################################################################### # Key Mode # Number: 0, 4, 6 # SpeedDial (0), SpeedDialViaActiveAccount (4), VoiceMail (6) P8475 = # Label. Max length allowed is 256 characters. # String P8476 = # Value. Max length allowed is 256 characters. # String P8477 = #################################################################### # Custom Softkey 2 #################################################################### # Key Mode # Number: 0, 4, 6 # SpeedDial (0), SpeedDialViaActiveAccount (4), VoiceMail (6) P8478 = # Label. Max length allowed is 256 characters. # String P8479 = # Value. Max length allowed is 256 characters. # String P8480 = #################################################################### # Custom Softkey 3 #################################################################### # Key Mode # Number: 0, 4, 6 # SpeedDial (0), SpeedDialViaActiveAccount (4), VoiceMail (6) P8481 = # Label. Max length allowed is 256 characters. # String P8482 = # Value. Max length allowed is 256 characters. # String P8483 = #################################################################### # Custom Call Screen Softkey Layout #################################################################### # Softkey layout in dialing state # String: EndCall,Backspace,Dial,Custom-Contacts,Custom-History,Custom-Intercom,Custom1,Custom2,Custom3 P2925 = EndCall,Backspace,Dial,Custom-Contacts,Custom-History # Softkey layout in ringing state # String: Answer,Reject,Forward,Custom-Silence,Custom1,Custom2,Custom3 P2926 = Answer,Reject,Forward,Custom-Silence # Softkey layout in calling state # String: EndCall,ConfCall,Custom1,Custom2,Custom3 P2927 = EndCall,ConfCall # Softkey layout in call connected state # String: EndCall,ConfCall,NewCall,Swap,Transfer,Record,Custom-Hold,Custom-NoiseShield,DialDTMF,UCallPark,RecordStop,Custom-BS-CallCenter,GDS,GroupListening,Cancel-Forward,Custom1,Custom2,Custom3 P2928 = EndCall,ConfCall,NewCall,Swap,Transfer,Record,Custom-Hold,Custom-NoiseShield,DialDTMF # Softkey layout in on hold state # String: EndCall,Resume,NewCall,ConfCall,Swap,Transfer,Custom-BS-CallCenter,GroupListening,Custom1,Custom2,Custom3 P2929 = EndCall,Resume,NewCall,ConfCall,Swap,Transfer # Softkey layout in call failed state # String: EndCall,Redial,Custom1,Custom2,Custom3 P2930 = EndCall,Redial # Softkey layout in transfer state # String: Cancel,Backspace,Transfer,Custom-Contacts,Custom-History,Custom1,Custom2,Custom3 P2931 = Cancel,Backspace,Transfer,Custom-Contacts,Custom-History # Softkey layout in conference state # String: Cancel,Dial,Backspace,Custom-Contacts,Custom-History,Custom1,Custom2,Custom3 P2932 = Cancel,Dial,Backspace,Custom-Contacts,Custom-History # Softkey layout in conference connected state # String: EndCall,ConfRoom,Custom-Hold,Add,Custom-NoiseShield,GroupListening,Custom1,Custom2,Custom3 P2933 = EndCall,ConfRoom,Custom-Hold,Add,Custom-NoiseShield # Softkey layout in onhook dialing state # String: EndCall,Backspace,Dial,Custom-Contacts,Custom-History,Custom-Intercom,Custom1,Custom2,Custom3 P2935 = EndCall,Backspace,Dial,Custom-Contacts,Custom-History #################################################################### # Advanced Settings ## #################################################################### # Auto Provision List Starting Point. (GRP2604 only) # Number: 1, 2. 1 - VPK, 2 - MPK. Default is 2. # Mandatory P8349 = 2 # Transfer Mode via Programmable Keys. 0 - Blind Transfer, 1 - Attended Transfer, 2 - New Call. Default is 0 # Number: 0, 1, 2 # Mandatory P8390 = 0 # Enable transfer via non-Transfer MPK. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P22162 = 0 # Allow Programmable Key Configuration via LCD. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P8444 = 1 # VPK Paging Auto Return Timeout(s) # Number: 0, 5 - 90. Default is 0 P8670 = 0 #################################################################### # System Settings ## #################################################################### #################################################################### # Time And Language ## #################################################################### #################################################################### # Time And Language/Date and Time #################################################################### # NTP Server # String P30 = pool.ntp.org # Secondary NTP Server # String P8333 = # Enable Authenticated NTP. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P22309 = 0 # NTP Update Interval # String # Number: 5 - 1440. Default is 1440 P5005 = 1440 # Allow DHCP Option 42 to override NTP server. 0 - No, 1 - Yes. Default is 0 # When set to Yes(1), it will override the configured NTP server # Number: 0, 1 # Mandatory P144 = 0 # Time Zone # Web GUI Option P Value # Automatic auto # GMT-12:00 (International Date Line West) TAZ+12 # GMT-11:00 (Midway Island, Samoa) TAB+11 # GMT-10:00 (US Hawaiian Time) HAW10 # GMT-9:00 (US Alaska Time) AKST9AKDT # GMT-8:00 (US Pacific Time, Los Angeles) PST8PDT # GMT-08:00 (Baja California) PST8PDT,M3.2.0,M11.1.0 # GMT-07:00 (US Mountain Time, Denver) MST7MDT # GMT-07:00 (Mountain Time (Arizona, no DST)) MST7 # GMT-07:00 (Chihuahua, La Paz, Mazatlan) MST7MDT,M4.1.0,M10.5.0 # GMT-06:00 (Central Time) CST6CDT # GMT-06:00 (Central America) CST+6 # GMT-06:00 (Guadalajara, Mexico City, Monterrey) CST6CDT,M4.1.0,M10.5.0 # GMT-05:00 (Eastern Time) EST5EDT # GMT-05:00 (Eastern Time without daylight saving) EST5 # GMT-04:30 (Caracas) TZf+4:30 # GMT-04:00 (Atlantic Time) AST4ADT # GMT-04:00 (Atlantic Time (New Brunswick)) AST4ADT,M3.2.0,M11.1.0 # GMT-04:00 (Santiago, Chile) CLT4CLST,M9.1.6/24:00,M4.1.6/24:00 # GMT-03:30 (Newfoundland Time) NST+3:30NDT+2:30,M4.1.0/00:01:00,M10.5.0/00:01:00 # GMT-03:00 (Greenland) TZK+3 # GMT-03:00 (Brazil, Sao Paulo) BRST+3BRDT+2,M11.1.0,M2.3.0 # GMT-02:00 (Argentina) UTC+3 # GMT-02:00 (Mid-Atlantic) TZL+2 # GMT-01:00 (Azores, Cape Verdi Is.) TZM+1 # GMT (Edinburgh, Casablanca, Monrovia) TZN+0 # GMT (London, Great Britain) GMT+0BST-1,M3.5.0/01:00:00,M10.5.0/02:00:00 # GMT (Lisbon, Portugal) WET-0WEST-1,M3.5.0/01:00:00,M10.5.0/02:00:00 # GMT (Dublin, Ireland) GMT+0IST-1,M3.5.0/01:00:00,M10.5.0/02:00:00 # GMT+01:00 (Paris, Vienna, Warsaw, Roma, Madrid, Prague, Berlin, Budapest, Amsterdam, Belgium) CET-1CEST-2,M3.5.0/02:00:00,M10.5.0/03:00:00 # GMT+02:00 (Israel, Cairo, Athens, Istanbul, Buchrest) TZP-2 # GMT+02:00 (Helsinki, Athens, Tallinn) EET-2EEST-3,M3.5.0/03:00:00,M10.5.0/04:00:00 # GMT+02:00 (Kyiv, Ukraine) EET-2EEST,M3.5.0/3,M10.5.0/4 # GMT+03:00 (Kuwait, Baghdad, Tehran, Nairobi) TZQ-3 # GMT+03:00 (Moscow, Russia) MSK-3 # GMT+04:00 (Abu Dhabi, Baku) TZR-4 # GMT+05:00 (Islamabad, Ekaterinburg, Karachi, Tashkent)TZS-5 # GMT+05:30 (Chennai, New Delhi, Mumbai) TZT-5:30 # GMT+05:45 (Kathmandu) TZU-5:45 # GMT+06:00 (Almaty, Astana, Dhaka, Novosibirsk) TZV-6 # GMT+06:30 (Rangoon) TZW-6:30 # GMT+07:00 (Bankok, Hanoi, Krasnoyarsk) TZX-7 # GMT+07:00 (Jakarta) WIB-7 # GMT+08:00 (Beijing, Taipei, Kuala Lumpur, Irkutsk) TZY-8 # GMT+08:00 (Singapore) SGT-8 # GMT+08:00 (Ulaanbaatar, Mongolia) ULAT-8 # GMT+08:00 (Perth) WST-8 # GMT+09:00 (Japan, Korea, Yakutsk) TZZ-9 # GMT+09:30 (Adelaide) CST-9:30CDT-10:30,M10.1.0/02:00:00,M4.1.0/03:00:00 # GMT+09:30 (Darwin) CST-9:30 # GMT+10:00 (Guam) TZb-10 # GMT+10:00 (Hobart) EST-10EDT-11,M10.1.0/02:00:00,M4.1.0/03:00:00 # GMT+10:00 (Sydney, Melbourne, Canberra) EST-10EDT-11,M10.1.0/02:00:00,M4.1.0/03:00:00 # GMT+10:00 (Brisbane) EST-10 # GMT+11:00 (Magadan, Solomon Is., New Caledonia) TZc-11 # GMT+12:00 (Auckland, Wellington) NZST-12NZDT-13,M9.5.0/02:00:00,M4.1.0/03:00:00 # GMT+12:00 (Fiji) TZd-12 # GMT+13:00 (Nuku'alofa) TZe-13 # Self-Defined Time Zone customize # String # Mandatory P64 = auto # Allow DHCP Option 2 to Override Time Zone Setting # Number: 0, 1 P143 = 1 # Self Defined Time Zone. Max length allowed is 64 characters # String # Mandatory P246 = MTZ+6MDT+5,M4.1.0,M11.1.0 # Date Display Format # 0: yyyy-mm-dd eg. 2011-10-31 # 1: mm-dd-yyyy eg. 10-31-2011 # 2: dd-mm-yyyy eg. 31-10-2011 # 3: dddd, MMMM dd eg. Monday, October 31 # Number: 0, 1, 2, 3 # Mandatory P102 = 0 # Time Display Format. 0 - 12 Hour, 1 - 24 Hour # Number: 0, 1 # Mandatory P122 = 0 #################################################################### # Time And Language/Language #################################################################### # Display Language. Default is auto # ar - Arabic, ca - Catalan, cz - Czech, de - Deutsh # en - English, es - Spanish, fr - Francais # he - Hebrew, hr - Hrvatski, hu - Magyar # it - Italiano, ja - japanese, ko - korean, lv - latvian # nl - Dutch, pl - Polski, pt - Portugue # ru - Russian, sl - Slovenian, se - Svenska, tr - Turkish # zh-tw - traditional chinese, zh - simplified chinese, auto - Automatic # Downloaded Language # String # Mandatory P1362 = auto #################################################################### # Input Method ## #################################################################### # Input Method for Contacts # Number: 0, 1, 2, 3. 0 - 123, 1 - abc, 2 - ABC, 3 - Ab2, 4 - Q9 # Mandatory P22465 = 0 # Input Method for LDAP # Number: 0, 1, 2, 3. 0 - 123, 1 - abc, 2 - ABC, 3 - Ab2, 4 - Q9 # Mandatory P22466 = 0 #################################################################### # Security Settings ## #################################################################### #################################################################### # Security Settings/"Web/SSH Access" #################################################################### #################################################################### # Security Settings/"Web/SSH Access"/SSH Access #################################################################### # Enable SSH. 0 - Yes, 1 - No. Default is 0 # Number: 0, 1 P276 = 0 # SSH Port # Number. Default is 22 P27006 = 22 #################################################################### # Security Settings/"Web/SSH Access"/LCD Mode #################################################################### # Configuration Via Keypad Menu. 0 - Unrestricted, 1 - Basic settings only, 2 - Constraint mode, 3 - Locked Mode. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P1357 = 0 # Factory Reset Security Level. 0 - Default, 1 - Always Require Password, 2 - No Password Required. Default is 0 # Number: 0, 1, 2 # Mandatory P22373 = 0 # Wi-Fi Settings Security Level. (For GRP2602W only) 0 - Default, 1 - Always Require Password, 2 - No Password Required. Default is 0 # Number: 0, 1, 2. # Mandatory P22460 = 0 #################################################################### # Security Settings/"Web/SSH Access"/Web Access #################################################################### # HTTP Web Port. Default is 80 # Number # Mandatory P22120 = 80 # HTTPS Web Port. Default is 443 # Number # Mandatory P22121 = 443 # Web Access Mode. 0 - HTTPS, 1 - HTTP, 2 - Disabled, 3 - Both HTTP and HTTPS. Default is 3 # Number: 0, 1, 2, 3 # MandatoryFactory Reset Security Level P1650 = 3 # Web Access Control. 0 - None, 1 - Whitelist, 2 - Blacklist. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P22374 = 0 # Web Access Control List # String P22375 = # Web Session Timeout(in minutes) # Number: 2 - 60. Default is 10 P28116 = 10 # Enable User Web Access. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P8469 = 0 # Validate Server Certificates. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P8463 = 0 # Web/Restrict mode Lockout Duration (0-60 minutes). Default is 5 # Number: 0-60 P1683 = 5 # Web Access Attempt Limit # Number: 1 - 10. Default is 5 P28117 = 5 #################################################################### # Security Settings/User Info Management #################################################################### # Test Password Strength. Default is 0. # Number: 0, 1. 0 - No, 1 - Yes. P8468 = 0 # User Password # String: a-z, A-Z, 0-9 # P196 = # Admin Password # String: a-z, A-Z, 0-9 # P2 = #################################################################### # Security Settings/Client Certificate #################################################################### # Minimum TLS Version. 10 - TLS 1.0, 11 - TLS 1.1, 12 -TLS 1.2 , 13 - TLS 1.3. Default is 10. # Number: 10, 11, 12, 13 # Mandatory P22293 = 10 # Maximum TLS Version. 99 - Unlimited, 10 - TLS 1.0, 11 - TLS 1.1, 12 - TLS 1.2, 13 - TLS 1.3. Default is 99. # Number: 10, 11, 12, 13, 99 # Mandatory P22294 = 99 # Enable LEGACY_SERVER_CONNECT. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P22562 = 0 # Enable/Disable Weak Cipher Suites. # 0 -Enable Weak TLS Ciphers Suites, 1 - Disable Symmetric Encryption RC4/DES/3DES, 2 - Disable Symmetric Encryption SEED, 3 - Disable All Weak Symmetric Encryption, 4 - Disable Symmetric Authentication MD5, 5 - Disable All Weak TLS Ciphers Suites # Number: 0 - 5. Default is 0. # Mandatory P8536 = 0 # SIP TLS Certificate # String: a-z, A-Z, 0-9 # P280 = # SIP TLS Private Key # String: a-z, A-Z, 0-9 # P279 = # SIP TLS Private Key Password # String: a-z, A-Z, 0-9 P281 = # Custom Certificate # String (string length: min:0, max: 8192) # P8472 = #################################################################### # Security Settings/Trusted CA Certificates #################################################################### # Trusted CA Certificates 1 # String P8433 = # Trusted CA Certificates 2 # String P8434 = # Trusted CA Certificates 3 # String P8435 = # Trusted CA Certificates 4 # String P8436 = # Trusted CA Certificates 5 # String P8437 = # Trusted CA Certificates 6 # String P8438 = # Load CA Certificates. 0 - Default Certificates, 1 - Custom Certificates, 2 - All Certificates # Number: 0, 1, 2. Default is 0 P8502 = 0 ############################################################################## ## Maintenance/Security Settings/Keypad Lock ## ############################################################################## # Enable Keypad Locking. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P1382 = 0 # Keypad Lock Type. 0 - All Keys, 1 - Customized. Default is 0 # Number: 0, 1 # Mandatory P8383 = 0 # Keys to Lock when idle. # String: SoftKeys,NavigationKeys,VoicemailKey,MuteKey,TransferKey,SendKey,MPKeys,Hookswitch,NumberKeys,StarKey,PoundKey,VolumeKeys,SpeakerKey,HeadsetKey,LineKeys P22462 = SoftKeys,NavigationKeys,VoicemailKey,MuteKey,TransferKey,SendKey,MPKeys # Keys to Lock when in call. # String: SoftKeys,NavigationKeys,VoicemailKey,MuteKey,TransferKey,MPKeys,Hookswitch,NumberKeys,StarKey,PoundKey,VolumeKeys,SpeakerKey,SendKey,HeadsetKey,LineKeys P22463 = SoftKeys,NavigationKeys,VoicemailKey,MuteKey,TransferKey,MPKeys # Password to Lock/Unlock # String P1383 = # Keypad Lock Timer. Default is 0 # Number # Mandatory P8384 = 0 # Emergency. Default is 112, 911, 110. # String P8385 = 112, 911, 110 #################################################################### # Preferences ## #################################################################### #################################################################### # Preferences/Display Control #################################################################### # Backlight Brightness # Active. Default is 8. # Number: 0-8 # Mandatory P334 = 8 # Idle. Default is 1. # Number: 0 - 8 # Mandatory P335 = 1 # Active Backlight Timeout. Default is 1 # Number: 1 - 90 # Mandatory P8356 = 1 # Enable Missed Call Backlight. 0 - Yes, 1 - No, 2 - No, but flash MWI LED. Default is 0 # Number: 0, 1, 2 # Mandatory P351 = 0 # New Message LED Indicator. 0 - Blinking, 1 - Off, 2 - Solid. Default is 0 # Number: 0, 1, 2 # Mandatory P8371 = 0 # Enable Incoming Call Indicator. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P82285 = 0 # Line LED Color Scheme. 0 - Default, 1 - Light up. Default is 0 # Number: 0, 1 # Mandatory P22362 = 0 #################################################################### # Preferences/Audio Control #################################################################### # Call Tone Volume. # Number: -15 - 15. Default is 0 P22370 = 0 # Speaker Ring Volume. # Number: 0 - 8. Default is 4 P8352 = 4 # Lock Speaker Volume. 0 - No, 1 - Ring, 2 - Talk, 3 - Both. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P8392 = 0 # Enable Warning Tone. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P22444 = 1 # Headset # HEADSET Key Mode. 0 - Default Mode, 1 - Toggle Headset/Speaker, 2 - Disable Headset Key. Default is 0 # Number: 0, 1, 2 # Mandatory P1312 = 0 # Headset Type. 0 - Normal, 1 - Plantronics EHS, 2 - Jabra EHS, 3 - Sennheiser EHS. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P1487 = 0 # Always Ring Speaker. 0 - No, 1 - Yes, both, 2 - Yes, speaker only. Default is 0 # Number: 0, 1, 2 # Mandatory P1439 = 0 # Group Listen with handset. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P22100 = 0 # Group Listen with Speaker. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P22163 = 0 # Headset TX Gain(dB). 1 - -6, 0 - 0, 2 - +6. Default is 0 # Number: 0, 1, 2 # Mandatory P1301 = 0 # Headset RX Gain(dB). 1 - -6, 0 - 0, 2 - +6. Default is 0 # Number: 0, 1, 2 # Mandatory P1302 = 0 # Enable Headset Noise Shield 2.0. 0 - Disable, 1 - Moderate Headset, 2 - Loud Headset, 3 - Thin Headset, 4 - Plantronics SP11-A # Number: 0, 1, 2, 3, 4 # Mandatory P8563 = 1 #################################################################### # Handset #################################################################### # Handset TX gain(dB). 1 - -6, 0 - 0, 2 - +6. Default is 0 # Number: 0, 1, 2 # Mandatory P1464 = 0 # Enable Handset Noise Shield 2.0. Default is 1.0 - Disable, 1 - High Shielding, 2 - Soft Shielding # Number: 0, 1, 2. Default is 1. # Mandatory P8538 = 1 # Handset Sidetone Volume # Number: 0 - 30. Default is 15 # Mandatory P22484 = 15 # Enable HAC. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P22485 = 0 #################################################################### # System Settings/Energy Saving #################################################################### # Energy Saving Master Control. 0 - Standard Mode, 1 - Maximum Energy Saving Mode, 2 - Customized Energy Saving Mode. # Number: 0, 1, 2. Default is 0. # Mandatory P1000 = 0 # Under Customized Energy Saving Mode: # Backlight Brightness # Active. Default is 8. # Number: 0-8 # Mandatory # P334 = 8 # Idle. Default is 1. # Number: 0 - 8 # Mandatory # P335 = 1 # Active Backlight Timeout. Default is 1 # Number: 1 - 90 # Mandatory # P8356 = 1 # Enable Missed Call Backlight. 0 - Yes, 1 - No, 2 - No, but flash MWI LED. Default is 0 # Number: 0, 1, 2 # Mandatory # P351 = 0 ############################################################################## ## System Settings/Management Settings/Management Interface ############################################################################## # Enable Management Interface # Number: 0, 1. 0 - No, 1 - Yes # Mandatory P28161 = 0 # Management Access # Number: 0, 1. 0 - Management Interface Only, 1 - Both Service and Management Interfaces # Mandatory P28162 = 0 # Enable SNMP Through Management Interface # Number: 0, 1. 0 - No, 1 - Yes # Mandatory P28209 = 0 # Enable TR069 Through Management Interface # Number: 0, 1. 0 - No, 1 - Yes # Mandatory P8607 = 0 # Enable Syslog Through Management Interface # Number: 0, 1. 0 - No, 1 - Yes # Mandatory P8610 = 0 # 802.1Q/VLAN Tag # Number: 0-4094 P22111 = 0 # 802.1p Priority Value # Number: 0-7 P22112 = 0 # IPv4 Address Type # Number: 0, 1. 0 - dynamiccaly assigned via DHCP, 1 - statically configured as # Mandatory P22105 = 0 # IP Address P22106 = # Subnet Mask P22107 = # Default Router P22108 = # DNS Server 1 P22109 = # DNS Server 2 P22110 = #################################################################### ## System Settings/Management Settings/TR-069 #################################################################### # Enable TR-069 # Number: 0, 1 # Mandatory P1409 = 0 # ACS URL # String P4503 = https://acs.gdms.cloud # TR-069 Username # String P4504 = # TR-069 Password # String P4505 = # Periodic Inform Enable. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P4506 = 1 # Periodic Inform Interval. Default is 60. # Number P4507 = 60 # Connection Request Username # String: a-z, A-Z, 0-9 P4511 = # Connection Request Password # String: a-z, A-Z, 0-9 P4512 = # Connection Request Port. Default is 7547. # Number P4518 = 7547 # CPE SSL Certificate # String: a-z, A-Z, 0-9 P8220 = # CPE SSL Private Key # String: a-z, A-Z, 0-9 P8221 = # Start TR-069 at Random Time. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 # Mandatory P8487 = 0 #################################################################### ## System Settings/Management Settings/SNMP Settings #################################################################### # Enable SNMP. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P21896 = 0 # Version. 1 - Version 1, 2 - Version 2, 3 - Version 3. Default is 3 # Number: 1, 2, 3 # Mandatory P21904 = 3 # Port # Number. Default is 161. # Mandatory P21903 = 161 # Community # String P21902 = # Security Level # Number: 0 - noAuthUser, 1 - authUser, 2 - privUser. Default is 0 # Mandatory P21910 = 0 # SNMP Username # Strings P21905 = # Authentication Protocol # Number: 0 - None, 1 - MD5, 2 - SHA. Default is 0 # Mandatory P21906 = 0 # Privacy Protocol # Number: 0 - None, 1 - DES, 2 - AES. Default is 0 # Mandatory P21907 = 0 # Authentication Key # String P21908 = # Privacy Key # String P21909 = # SNMP Trap Version # Number: 1, 2. 1 - Version 1, 2 - Version 2, 3 - Version 3. Default is 2 P21899 = 2 # SNMP Trap IP # String P21897 = # SNMP Trap Port # Number: 1025 - 65535. Default is 162 P21898 = 162 # SNMP Trap Interval # Number: 1 - 1440. Default is 5 P21901 = 5 # SNMP Trap Community # String P21900 = # SNMP Trap Username # String P21911 = # Trap Security Level # Number: 0 - noAuthUser, 1 - authUser, 2 - privUser. Default is 0 # Mandatory P21916 = 0 # Trap Authentication Protocol # Number: 0 - None, 1 - MD5, 2 - SHA. Default is 0 # Mandatory P21912 = 0 # Trap Privacy Protocol # Number: 0 - None, 1 - DES, 2 - AES. Default is 0 # Mandatory P21913 = 0 # Trap Authentication Key # String P21914 = # Trap Privacy Key # String P21915 = #################################################################### # Maintenance ## #################################################################### #################################################################### # Upgrade and Provisioning ## #################################################################### #################################################################### # Upgrade and Provisioning/Firmware #################################################################### #################################################################### # Upgrade and Provisioning/Firmware/Upgrade via Network #################################################################### # Firmware Upgrade Via. 0 - TFTP, 1 - HTTP, 2 - HTTPS, 3 - FTP, 4 - FTPS. Default is 1. # Number: 0, 1, 2, 3, 4 # Mandatory P6767 = 1 # Firmware Server Path # String P192 = fm.grandstream.com/gs # Firmware HTTP/HTTPS Username # String P6768 = # Firmware HTTP/HTTPS Password # String P6769 = # Firmware File Prefix # String P232 = # Firmware File Postfix # String P233 = #################################################################### # Upgrade and Provisioning/Config File #################################################################### #################################################################### # Upgrade and Provisioning/Config File/Configure via Network #################################################################### # Config Upgrade Via. 0 - TFTP, 1 - HTTP, 2 - HTTPS, 3 - FTP, 4 - FTPS. Default is 2 # Number: 0, 1, 2, 3, 4 # Mandatory P212 = 2 # Config Server Path # String P237 = fm.grandstream.com/gs # Config HTTP/HTTPS Username # String P1360 = # Config HTTP/HTTPS Password # String P1361 = # Always Authenticate Before Challenge. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P20713 = 0 # Config File Prefix # String P234 = # Config File Postfix # String P235 = # Authenticate Conf File. 0 - No, 1 - Yes. Default is No # Number: 0, 1 # Mandatory P240 = 0 # XML Config File Password # String P1359 = #################################################################### # Upgrade and Provisioning/Provision #################################################################### #################################################################### # Upgrade and Provisioning/Auto Upgrade #################################################################### # Automatic Upgrade. # 0 - No, # 1 - Yes, check for upgrade every () minute, # 2 - Yes, check for upgrade every day, # 3 - Yes, check for upgrade every week, # Default is No # Number: 0, 1, 2, 3 # Mandatory P194 = 0 # Automatic Upgrade Check Interval (m). Default is 10080. # Number: 60-86400 # Mandatory P193 = 10080 # Hour of the Day-Start (0-23). Default is 1 # Number: 0 - 23 P285 = 1 # Hour of the Day-End (-1, 0-23). Default is 0 # Number: -1, 0 - 23 P8459 = 0 # Day of the Week (0-6). Default is 1 # Number: 0-6 P286 = 1 # Start Upgrade at Random Time. 0 - Disabled, 1 - Enabled. Default is 0. # Number: 0, 1 # Mandatory P8458 = 0 # Firmware Upgrade and Provisioning # 0 - Always check for new firmware # 1 - Check new firmware only when F/W pre/suffix changes # 2 - Always skip the firmware check # Number: 0, 1, 2 # Mandatory P238 = 0 # Firmware Upgrade Confirmation. 0 - No, 1 - Yes. Default is 1 # Number: 0,1 # Mandatory P8375 = 1 #################################################################### # Upgrade and Provisioning/DHCP Option #################################################################### # Allow DHCP Option 43 and Option 66 to override server. 0 - No, 1 - Yes, 2 - Prefer, fallback when failed. Default is 1 # When set to Yes(1), it will override the configured provision path and method # Number: 0, 1, 2 # Mandatory P145 = 1 # Allow DHCP Option 120 to Override SIP Server # 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P1411 = 0 # Additional Override DHCP Option. 0 - None, 1 - Option 150, 2 - Option 160. Default is 1 # Number: 0, 1, 2 # Mandatory P8337 = 1 #################################################################### # Upgrade and Provisioning/Provision/Config Provision #################################################################### # Download and Process All Available Config Files. 0 - No, 1 - Yes. Default is No # Number: 0, 1 # Mandatory P8467 = 0 # User Protection. 0 - Off, 1 - On. Default is Off # Number: 0, 1 # Mandatory P9996 = 0 # Auto Provision. 0 - No, 1 - Yes. Default is Yes # Number: 0, 1 # Mandatory P1414 = 1 #################################################################### # Upgrade and Provisioning/Advanced Settings #################################################################### # Validate Hostname in Certificate. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 P22030 = 0 # Enable SIP NOTIFY Authentication. 0 - Yes, 1 - No. Default is 1 # Number: 0,1 # Mandatory P4428 = 0 #################################################################### # System Diagnosis ## #################################################################### #################################################################### # System Diagnosis/Syslog #################################################################### # Syslog Protocol. 0 - UDP, 1 - SSL/TLS. Default is 0 # Number: 0, 1 # Mandatory P8402 = 0 # Syslog Server (name of the server, max length is 64 characters) # String P207 = # Syslog Level. 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR. Default is 0 # Number: 0, 1, 2, 3, 4 # Mandatory P208 = 0 # Syslog Keyword Filtering # String P22129 = # Send SIP Log. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P1387 = 0 # Maintain System Log Information after Factory Reset. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P82307 = 0 #################################################################### # System Diagnosis/Packet Capture #################################################################### # With RTP Packets. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P6007 = 0 # With Secret Key Information. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P22419 = 1 # Packet Capture Data Coverage. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory Ppcap_cover = 0 ############################################################################## # System Diagnosis/Outbound Notification ############################################################################## ###################################################################################### # Action URL ###################################################################################### # Phone Status # Setup Completed. # String P8304 = # Registered. # String P8305 = # Unregistered. # String P8306 = # Register failed. # String P8307 = # Idle to Busy. # String P8328 = # Busy to Idle. # String P8329 = # Auto Provision Completed. # String P8332 = # IP Change. # String P22170 = # Call Operation # Off-Hook. # String P8308 = # On-Hook. # String P8309 = # Incoming Call. # String P8310 = # Outgoing Call # String P8311 = # Missed Call # String P8312 = # Established Call # String P8313 = # Forwarded Call # String P22173 = # Terminated Call # String P8314 = # Answered Call # String P22171 = # Rejected Call # String P8315 = # Blind Transfer # String P8320 = # Attended Transfer # String P8321 = # Transfer Completed # String P8322 = # Transfer failed # String P8323 = # Hold Call # String P8324 = # Unhold Call # String P8325 = # Mute Call # String P8326 = # Unmute Call # String P8327 # Call Settings # Enable DND # String P8316 = # Disable DND # String P8317 = # Enable Call Forward # String P8318 = # Disable Call Forward # String P8319 = # Open Forward Always # String P22164 = # Close Forward Always # String P22165 = # Open Call Forward Busy # String P22166 = # Close Call Forward Busy # String P22167 = # Open Call Forward No Answer # String P22168 = # Close Call Forward No Answer # String P22169 = #################################################################### # Voice Monitoring ## #################################################################### #################################################################### # Voice Monitoring/Session Report #################################################################### # VQ RTCP-XR Session Report. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 P8489 = 0 #################################################################### # Voice Monitoring/Interval Report #################################################################### # VQ RTCP-XR Interval Report. 0 - Disabled, 1 - Enabled. Default is 0 # Number: 0, 1 P8490 = 0 # VQ RTCP-XR Interval Report Period. 1 - 5, 2 - 10, 3 - 15, 4 - 20. Default is 4 # Number: 1, 2, 3, 4 P8491 = 4 #################################################################### # Voice Monitoring/Alert Report #################################################################### # Warning Threshold for Moslq # String P8492 = 0 # Critical Threshold for Moslq # String P8493 = 0 # Warning Threshold for Delay # String P8494 = 0 # Critical Threshold for Delay # String P8495 = 0 #################################################################### # Voice Monitoring/Display Report #################################################################### # Display Report on Web UI. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P8496 = 0 # Display Report on LCD. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 # Mandatory P8497 = 0 # Custom Display Layout on LCD # String: Overview,PacketLostRate,RoundTripDelay,Jitter,MosLQ,MosCQ,StartTime,StopTime,LocalUser,RemoteUser,LocalIP,RemoteIP,LocalCodec,RemoteCodec, # JitterBufferMax,EndSysDelay,SymmOneWayDelay P8507 = Overview,PacketLostRate,RoundTripDelay,Jitter,MosLQ,MosCQ #################################################################### # Maintenance/Scheduled Tasks #################################################################### # Working Time. # String. Default is 09:00-17:00 P22449 = 09:00-17:00 #################################################################### # Application ## #################################################################### #################################################################### # Application/Web Service #################################################################### # Use Auto Location Service. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P8338 = 1 #################################################################### # Application/XML Application #################################################################### # Idle Screen XML Download. # Number: 0,1,2,3. Default is 0. # 0 - Disabled, 1 - Enabled, use HTTP, 2 - Enabled, use TFTP, 3 - Enabled, use HTTPS. P340 = 0 # Download Screen XML at Boot-up # Number: 0, 1. 0 - No, 1 - Yes. Default is 0 # Mandatory P1349 = 0 # Use Custom Filename # Number: 0, 1. 0 - No, 1 - Yes. Default is 0 # Mandatory P1343 = 0 # Idle Screen XML Server Path # String P341 = #################################################################### # Application/Contacts #################################################################### #################################################################### # Application/Contacts/Phonebook Management #################################################################### # Enable Phonebook XML Download. # 0 - Disabled, 1 - Enabled, use HTTP, 2 - Enabled, use TFTP, 3 - Enabled, use HTTPS. Default is 0 # Number: 0, 1, 2, 3 # Mandatory P330 = 0 # HTTP/HTTPS Username # String P6713 = # HTTP/HTTPS Password # String P6714 = # Phonebook XML Server Path # This is a string of up to 256 characters that should contain a path to the XML file. It MUST be in the host/path format. # For example: directory.grandstream.com/engineering # String P331 = # Phonebook Download Interval (in minutes) # Valid value range is 5-720. Default is 0 for disabled # Number: 0, 5-720; P332 = 0 # Remove Manually-edited Entries on Download. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P333 = 1 # Import Group Method. 0 - Replace, 1 - Append. Default is 0 # Number: 0, 1 # Mandatory P8462 = 0 # Sort Phonebook by. 0 - Last Name, 1 - First Name. Default is 0 # Number: 0, 1 # Mandatory P2914 = 0 # Default Search Mode. 0 - Quick match, 1 - Exact match. Default is 0 # Number: 0, 1. # Mandatory P2970 = 0 #################################################################### # Application/LDAP #################################################################### # Enable UCM LDAP Auto-config Feature on LCD. 0 - No, 1 - Yes. Default is 1 # Number: 0, 1 # Mandatory P22511 = 1 # LDAP Protocol. 0 - LDAP, 1 - LDAPS # Number: 0,1 # Mandatory P8037 = 0 # LDAP Server Address, up to 256 characters can be used. It can be IP address or Domain name # String P8020 = # LDAP Server Port. Default is 389. # Number: 1 - 65535 P8021 = 389 # Base DN. The LDAP search base refers to the location in the directory where the search is requested to begin # Example 1: dc=grandstream,dc=com # Example 2: ou=Boston, dc=grandstream,dc=com # String P8022 = # Username. The bind "Username" for querying LDAP servers. Some LDAP servers allow anonymous binds in which case the setting can be left blank # String P8023 = # Password. The bind "Password" for querying LDAP servers. And the field can be left blank if the LDAP server allows anonymous binds # String P8024 = # LDAP Number Filter # String P8025 = # LDAP Name Filter # String P8026 = # LDAP Mail Filter # String P8039 = # LDAP Version. Protocol version for the phone when send the bind requests # 2 - version 2, 3 - version 3. Default is 3 # Mandatory P8027 = 3 # LDAP Name Attributes. This setting specifies the "name" attributes of each record which are returned in the LDAP search result # The setting allows the users to configure multiple space separated name attributes # String P8028 = # LDAP Number Attributes. This setting specifies the "number" attributes of each record which are returned in the LDAP search result # The setting allows the users to configure multiple space separated number attributes # String P8029 = # LDAP Mail Attributes # String P8038 = # LDAP Display Name. The entry information to be shown on phone LCD. Grandstream phones will display up to 3 fields # String P8030 = # Max Hits. The setting specifies the maximum number of results to be returned by the LDAP server # If the value is set to 0, server will return all search results. Default is 50 # Number: 0 - 32000 # Mandatory P8031 = 50 # Search Timeout (in seconds). Default is 30 # The setting specifies how long the server should process the request and client waits for server to return # Number: 0 - 180 # Mandatory P8032 = 30 # Sort Results. This setting is used for sorting searching result. Default is 0 # Number: 0, 1. 0 - No, 1 - Yes. Default is 0 # Mandatory P8033 = 0 # LDAP Lookup # Incoming calls. 0 - No, 1 - Yes. Default is 0 P8035 = 0 # Outgoing calls. 0 - No, 1 - Yes. Default is 0 P8034 = 0 # Lookup Display Name # String P8036 = # LDAP Dialing Default Account # -1 - Auto, 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: -1, 0, 1, 2, 3, 4, 5 P22039 = -1 # Exact Match Search. . 0 - No, 1 - Yes. Default is 0 # Mandatory P8505 = 0 #################################################################### # Application/Remote Phonebook #################################################################### #################################################################### # Phonebook 1 ## #################################################################### # Display Name # String P22427 = # URL # String P22428 = # Username # String P22429 = # Password # String P22430 = #################################################################### # Phonebook 2 ## #################################################################### # Display Name # String P22431 = # URL # String P22432 = # Username # String P22433 = # Password # String P22434 = #################################################################### # Phonebook 3 ## #################################################################### # Display Name # String P22435 = # URL # String P22436 = # Username # String P22437 = # Password # String P22438 = # Remote Phonebook Update Interval(m) # Number: 0, 5-720 P22426 = 0 #################################################################### # Application/Online Contacts #################################################################### # Contacts Search URL # String P22467 = # Contacts search HTTP POST # String P22510 = # Contacts Search Auth Username # String P22468 = # Contacts Search Auth Password # String P22469 = # Contact Search Response Syntax # String P22470 = #################################################################### # External Service ## #################################################################### #################################################################### # External Service/GDS #################################################################### ############################################################### # Order 1 ############################################################### # Service Type. 1 - Others, 0 - GDS. Default is 1. # Number: 1, 0 # Mandatory: 1 P32000 = 1 # Account # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory P32001 = 0 # System Identification # String P32002 = # System Number # String P32003 = # Access Password # String P32004 = # System Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone. Default is 7. P22241 = 7 ############################################################### # Order 2 ############################################################### # Service Type. 1 - Others, 0 - GDS. Default is 1. # Number: 1, 0 # Mandatory: 1 P32005 = 1 # Account # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory P32006 = 0 # System Identification # String P32007 = # System Number # String P32008 = # Access Password # String P32009 = # System Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone. Default is 7. P22242 = 7 ############################################################### # Order 3 ############################################################### # Service Type. 1 - Others, 0 - GDS. Default is 1. # Number: 1, 0 # Mandatory: 1 P32010 = 1 # Account # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory P32011 = 0 # System Identification # String P32012 = # System Number # String P32013 = # Access Password # String P32014 = # System Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone. Default is 7. P22243 = 7 ############################################################### # Order 4 ############################################################### # Service Type. 1 - Others, 0 - GDS. Default is 1. # Number: 1, 0 # Mandatory: 1 P32015 = 1 # Account # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory P32016 = 0 # System Identification # String P32017 = # System Number # String P32018 = # Access Password # String P32019 = # System Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone. Default is 7. P22244 = 7 ############################################################### # Order 5 ############################################################### # Service Type. 1 - Others, 0 - GDS. Default is 1. # Number: 1, 0 # Mandatory: 1 P32020 = 1 # Account # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory P32021 = 0 # System Identification # String P32022 = # System Number # String P32023 = # Access Password # String P32024 = # System Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone. Default is 7. P22245 = 7 ############################################################### # Order 6 ############################################################### # Service Type. 1 - Others, 0 - GDS. Default is 1. # Number: 1, 0 # Mandatory: 1 P32025 = 1 # Account # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory P32026 = 0 # System Identification # String P32027 = # System Number # String P32028 = # Access Password # String P32029 = # System Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone. Default is 7. P22246 = 7 ############################################################### # Order 7 ############################################################### # Service Type. 1 - Others, 0 - GDS. Default is 1. # Number: 1, 0 # Mandatory: 1 P32030 = 1 # Account # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory P32031 = 0 # System Identification # String P32032 = # System Number # String P32033 = # Access Password # String P32034 = # System Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone. Default is 7. P22247 = 7 ############################################################### # Order 8 ############################################################### # Service Type. 1 - Others, 0 - GDS. Default is 1. # Number: 1, 0 # Mandatory: 1 P32035 = 1 # Account # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory P32036 = 0 # System Identification # String P32037 = # System Number # String P32038 = # Access Password # String P32039 = # System Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone. Default is 7. P22248 = 7 ############################################################### # Order 9 ############################################################### # Service Type. 1 - Others, 0 - GDS. Default is 1. # Number: 1, 0 # Mandatory: 1 P32040 = 1 # Account # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory P32041 = 0 # System Identification # String P32042 = # System Number # String P32043 = # Access Password # String P32044 = # System Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone. Default is 7. P22249 = 7 ############################################################### # Order 10 ############################################################### # Service Type. 1 - Others, 0 - GDS. Default is 1. # Number: 1, 0 # Mandatory: 1 P32045 = 1 # Account # 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4, 4 - Account 5, 5 - Account 6 # Number: 0, 1, 2, 3, 4, 5. Default is 0. # Mandatory P32046 = 0 # System Identification # String P32047 = # System Number # String P32048 = # Access Password # String P32049 = # System Ringtone # 0 - system, 1 - ring1, 2 - ring2, 3 - ring3, 4 - ring4, 5 - ring5, 6 - ring6, 7 - Doorbell, 8 - silent. Default is 0 # Number: 0-8, more if using custom ringtone. Default is 7. P22250 = 7 #################################################################### # External Service/Call Center #################################################################### # Wrap-up Countdown (m). Default is 6. # Number P22378 = 6 #################################################################### # External Service/Broadsoft XSI #################################################################### #################################################################### # Authentication Login #################################################################### # XSI # Server # String P1591 = # Port # Number P1592 = # XSI Actions Path # String P2937 = # XSI Authentication Type. # 0 - Login Credentials, 1 - SIP Credentials (customize), 2 - Account 1, 3 - Account 2, 4 - Account 3, 5 - Account 4, 6 - Account 5, 7 - Account 6. # Number: 0, 1, 2, 3, 4, 5, 6, 7. Default is 0. # Mandatory P22054 = 0 # Login Credentials # BroadSoft User ID # String P1593 = # Login Password # String P1594 = # SIP Credentials # BroadSoft User ID # String P22034 = # SIP Authentication ID # String P6772 = # SIP Authentication Password # String P6773 = # Aut0 Login. 0 - No, 1 - Yes. Default is 0. # Number: 0, 1 # Mandatory P22379 = 0 #################################################################### # Service Settings #################################################################### # Sort Phonebook by. 0 - Last Name, 1 - First Name. Default is 0. # Number: 0, 1 # Mandatory P22131 = 0 # Broadsoft Directory Update Interval(m) # Number: 0, 5-4320 # Mandatory P8362 = 4320 # Broadsoft Contacts Download Limit. # Number: 0-2000. Default is 1000 # Mandatory P8464 = 1000 # Broadsoft Contacts Search Limit # Number: 0 - 2000. Default is 100 P8465 = 100 #################################################################### # Network Directories #################################################################### ### Group Directory ### # Disabled/Enabled. 0 - Disabled, 1 - Enabled. # Number: 0, 1. Default is 0 # Mandatory P2971 = 0 # Name. # String P2972 = ### Enterprise Directory ### # Disabled/Enabled. 0 - Disabled, 1 - Enabled. # Number: 0, 1. Default is 0 # Mandatory P2973 = 0 # Name. # String P2974 = ### Group Common ### # Disabled/Enabled. 0 - Disabled, 1 - Enabled. # Number: 0, 1. Default is 0 # Mandatory P2975 = 0 # Name. # String P2976 = ### Enterprise Common ### # Disabled/Enabled. 0 - Disabled, 1 - Enabled. # Number: 0, 1. Default is 0 # Mandatory P2977 = 0 # Name. # String P2978 = ### Personal Directory ### # Disabled/Enabled. 0 - Disabled, 1 - Enabled. # Number: 0, 1. Default is 0 # Mandatory P2979 = 0 # Name. # String P2980 = ### Missed Call Log ### # Disabled/Enabled. 0 - Disabled, 1 - Enabled. # Number: 0, 1. Default is 0 # Mandatory P2981 = 0 # Name. # String P2982 = ### Placed Call Log ### # Disabled/Enabled. 0 - Disabled, 1 - Enabled. # Number: 0, 1. Default is 0 # Mandatory P2983 = 0 # Name. # String P2984 = ### Received Call Log ### # Disabled/Enabled. 0 - Disabled, 1 - Enabled. # Number: 0, 1. Default is 0 # Mandatory P2985 = 0 # Name. # String P2986 = #################################################################### # External Service/E911 Service #################################################################### # Enable E911. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 P8565 = 0 # HELD Protocol. 0 - HTTP, 1 - HTTPS. Default is 0 # Number: 0, 1 P8566 = 0 # HELD Synchronization Interval(m). Default is 0 # Number: 0, 30-1440 P8567 = 0 # Location Server # String P8568 = # Location Server Username # String P8569 = # Location Server Password # String P8570 = # Secondary Location Server # String P8571 = # Secondary Location Server Username # String P8572 = # Secondary Location Server Password # String P8573 = # HELD Location Types # String: Geodetic,civic,locationURI P8574 = # HELD Use LLDP Information. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 P8575 = 0 # HELD NAI. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 P8576 = 0 # HELD Identity 1 # String P8577 = # HELD Identity 1 Value # String P8578 = # HELD Identity 2 # String P8579 = # HELD Identity 2 Value # String P8580 = # HELD Identity 3 # String P8581 = # HELD Identity 3 Value # String P8582 = # HELD Identity 4 # String P8583 = # HELD Identity 4 Value # String P8584 = # HELD Identity 5 # String P8585 = # HELD Identity 5 Value # String P8586 = # HELD Identity 6 # String P8587 = # HELD Identity 6 Value # String P8588 = # HELD Identity 7 # String P8589 = # HELD Identity 7 Value # String P8590 = # HELD Identity 8 # String P8591 = # HELD Identity 8 Value # String P8592 = # HELD Identity 9 # String P8593 = # HELD Identity 9 Value # String P8594 = # HELD Identity 10 # String P8595 = # HELD Identity 10 Value # String P8596 = # E911 Emergency Numbers # String P8597 = 911 # Geolocation-Routing Header. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 P8598 = 0 # Priority Header. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1 P8599 = 0 ########################################################################################################### # Provision config force reboot (This pvalue is used for provision only. There is no option on the web UI) ########################################################################################################### # Provision config force reboot. 0 - No, 1 - Yes. Default is 0 # Number: 0, 1. # Mandatory # P22421 = 0 ################################################################################################################ # Dialpad Navigation button provision (This pvalue is used for provision only. There is no option on the web UI) ################################################################################################################ # String: none,menu,settings,vpk.page.left,vpk.page.right,account.default.prev,account.default.next,info,ext.qrcode,messages.voicemail,messages.IM,callhistory.missed,callhistory.outgoing,callhistory.incoming,contacts.local,contacts.remote,contacts.broadsoft,contacts.LDAP # Short press Navigation--Up button # P8672=info # Long press Navigation--Up button # P8673=none # Short press Navigation--Down button # P8674=ext.qrcode # Long press Navigation--Down button # P8675=none # Short press Navigation--Left button # P8676=vpk.page.left # Long press Navigation--Left button # P8677=none # Short press Navigation--Right button # P8678=vpk.page.right # Long press Navigation--Right button # P8679=none # Short press Navigation--OK button # P8680=menu # Long press Navigation--OK button # P8681=none